You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
2nd button on the OSSC: short press = 240p / 480i, long press (1 second) = next HD format (Full 16:9 / Center 4:3 / Wide)
1024x768 input (60Hz, VESA standard timing 1344x806): 240p and 480i, 3 lines per output line, use the 960x720 center window (32 pixels and 24 lines cropped per side).
1280x1024 input (60Hz, VESA standard timing 1688x1066): 240p and 480i, 4 lines per output line, use the 960 center lines.
"Flicker filter" also for HD and PC sources with 480i output: 1080p Full / Center 4:3, 1280x1024, 1280x960, 720p Wide, 720p Full / Center 4:3 and 1024x768. With no input lines left below the picture (720p phase 2, 720p Wide phases 2-3, 1280x960 phases 1-3) the filter is off.
Changed
Output PLL: VCO at least 650MHz (was 600MHz, the datasheet minimum), for more margin. Same output timings; only the PLL multipliers change for some modes.
Installation
Copy ossc_ds_v1.5.bin to a micro SD card.
Install it from the official firmware's firmware update function (it is written to the secondary slot only).
Start it with Launch 2nd FW, then select the input with the remote.