Modified reference to Leonardo only in the examples

agdl · agdl · commit 9eaea4205d15 · 2015-09-21T14:58:58.000+02:00
According to arduino#3786 removed the reference to Leonardo only in while(!Serial) of the examples. Changed in in "wait for serial port to connect. Needed for native USB port only"
diff --git a/build/shared/examples/04.Communication/ASCIITable/ASCIITable.ino b/build/shared/examples/04.Communication/ASCIITable/ASCIITable.ino
@@ -23,7 +23,7 @@ void setup() {
   //Initialize serial and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   // prints title with ending line break
diff --git a/build/shared/examples/04.Communication/SerialCallResponse/SerialCallResponse.ino b/build/shared/examples/04.Communication/SerialCallResponse/SerialCallResponse.ino
@@ -33,7 +33,7 @@ void setup() {
   // start serial port at 9600 bps:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   pinMode(2, INPUT);   // digital sensor is on digital pin 2
diff --git a/build/shared/examples/04.Communication/SerialCallResponseASCII/SerialCallResponseASCII.ino b/build/shared/examples/04.Communication/SerialCallResponseASCII/SerialCallResponseASCII.ino
@@ -37,7 +37,7 @@ void setup() {
   // start serial port at 9600 bps and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
 
diff --git a/build/shared/examples/08.Strings/CharacterAnalysis/CharacterAnalysis.ino b/build/shared/examples/08.Strings/CharacterAnalysis/CharacterAnalysis.ino
@@ -15,7 +15,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   // send an intro:
diff --git a/build/shared/examples/08.Strings/StringAdditionOperator/StringAdditionOperator.ino b/build/shared/examples/08.Strings/StringAdditionOperator/StringAdditionOperator.ino
@@ -20,7 +20,7 @@ void setup() {
   // initialize serial and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   stringOne = String("stringThree = ");
diff --git a/build/shared/examples/08.Strings/StringAppendOperator/StringAppendOperator.ino b/build/shared/examples/08.Strings/StringAppendOperator/StringAppendOperator.ino
@@ -18,7 +18,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   stringOne = String("Sensor ");
diff --git a/build/shared/examples/08.Strings/StringCaseChanges/StringCaseChanges.ino b/build/shared/examples/08.Strings/StringCaseChanges/StringCaseChanges.ino
@@ -16,7 +16,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   // send an intro:
diff --git a/build/shared/examples/08.Strings/StringCharacters/StringCharacters.ino b/build/shared/examples/08.Strings/StringCharacters/StringCharacters.ino
@@ -16,7 +16,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   Serial.println("\n\nString  charAt() and setCharAt():");
diff --git a/build/shared/examples/08.Strings/StringComparisonOperators/StringComparisonOperators.ino b/build/shared/examples/08.Strings/StringComparisonOperators/StringComparisonOperators.ino
@@ -18,7 +18,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
 
diff --git a/build/shared/examples/08.Strings/StringConstructors/StringConstructors.ino b/build/shared/examples/08.Strings/StringConstructors/StringConstructors.ino
@@ -16,7 +16,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   // send an intro:
diff --git a/build/shared/examples/08.Strings/StringIndexOf/StringIndexOf.ino b/build/shared/examples/08.Strings/StringIndexOf/StringIndexOf.ino
@@ -16,7 +16,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   // send an intro:
diff --git a/build/shared/examples/08.Strings/StringLength/StringLength.ino b/build/shared/examples/08.Strings/StringLength/StringLength.ino
@@ -19,7 +19,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   // send an intro:
diff --git a/build/shared/examples/08.Strings/StringLengthTrim/StringLengthTrim.ino b/build/shared/examples/08.Strings/StringLengthTrim/StringLengthTrim.ino
@@ -16,7 +16,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   // send an intro:
diff --git a/build/shared/examples/08.Strings/StringReplace/StringReplace.ino b/build/shared/examples/08.Strings/StringReplace/StringReplace.ino
@@ -16,7 +16,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   // send an intro:
diff --git a/build/shared/examples/08.Strings/StringStartsWithEndsWith/StringStartsWithEndsWith.ino b/build/shared/examples/08.Strings/StringStartsWithEndsWith/StringStartsWithEndsWith.ino
@@ -16,7 +16,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   // send an intro:
diff --git a/build/shared/examples/08.Strings/StringSubstring/StringSubstring.ino b/build/shared/examples/08.Strings/StringSubstring/StringSubstring.ino
@@ -16,7 +16,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   // send an intro:
diff --git a/build/shared/examples/08.Strings/StringToInt/StringToInt.ino b/build/shared/examples/08.Strings/StringToInt/StringToInt.ino
@@ -19,7 +19,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   // send an intro:
diff --git a/hardware/arduino/avr/libraries/EEPROM/examples/eeprom_crc/eeprom_crc.ino b/hardware/arduino/avr/libraries/EEPROM/examples/eeprom_crc/eeprom_crc.ino
@@ -15,7 +15,7 @@ void setup() {
   //Start serial
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   //Print length of data to run CRC on.
@@ -49,4 +49,4 @@ unsigned long eeprom_crc(void) {
     crc = ~crc;
   }
   return crc;
-}
+}
diff --git a/hardware/arduino/avr/libraries/EEPROM/examples/eeprom_get/eeprom_get.ino b/hardware/arduino/avr/libraries/EEPROM/examples/eeprom_get/eeprom_get.ino
@@ -24,7 +24,7 @@ void setup() {
 
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
   Serial.print("Read float from EEPROM: ");
 
@@ -65,4 +65,4 @@ void secondTest() {
 
 void loop() {
   /* Empty loop */
-}
+}
diff --git a/hardware/arduino/avr/libraries/EEPROM/examples/eeprom_put/eeprom_put.ino b/hardware/arduino/avr/libraries/EEPROM/examples/eeprom_put/eeprom_put.ino
@@ -26,7 +26,7 @@ void setup() {
 
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   float f = 123.456f;  //Variable to store in EEPROM.
@@ -55,4 +55,4 @@ void setup() {
 
 void loop() {
   /* Empty loop */
-}
+}
diff --git a/hardware/arduino/avr/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino b/hardware/arduino/avr/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino
@@ -16,7 +16,7 @@ void setup() {
   // initialize serial and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 }
 
diff --git a/hardware/arduino/avr/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino b/hardware/arduino/avr/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino
@@ -33,7 +33,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(57600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
 
diff --git a/hardware/arduino/avr/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino b/hardware/arduino/avr/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino
@@ -46,7 +46,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
 
diff --git a/libraries/Esplora/examples/Experts/EsploraRemote/EsploraRemote.ino b/libraries/Esplora/examples/Experts/EsploraRemote/EsploraRemote.ino
@@ -32,8 +32,8 @@
 #include <Esplora.h>
 
 void setup() {
-  while (!Serial); // needed for Leonardo-based board like Esplora
   Serial.begin(9600);
+  while (!Serial); // needed for native USB port only
 }
 
 void loop() {
diff --git a/libraries/Ethernet/examples/AdvancedChatServer/AdvancedChatServer.ino b/libraries/Ethernet/examples/AdvancedChatServer/AdvancedChatServer.ino
@@ -48,7 +48,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
 
diff --git a/libraries/Ethernet/examples/ChatServer/ChatServer.ino b/libraries/Ethernet/examples/ChatServer/ChatServer.ino
@@ -44,7 +44,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
 
diff --git a/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino b/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino
@@ -35,7 +35,7 @@ void setup() {
   Serial.begin(9600);
   // this check is only needed on the Leonardo:
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   // start the Ethernet connection:
diff --git a/libraries/Ethernet/examples/DhcpChatServer/DhcpChatServer.ino b/libraries/Ethernet/examples/DhcpChatServer/DhcpChatServer.ino
@@ -43,7 +43,7 @@ void setup() {
   Serial.begin(9600);
   // this check is only needed on the Leonardo:
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
 
diff --git a/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino b/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino
@@ -43,7 +43,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
 
diff --git a/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino b/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino
@@ -43,7 +43,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
 
diff --git a/libraries/Ethernet/examples/WebClient/WebClient.ino b/libraries/Ethernet/examples/WebClient/WebClient.ino
@@ -37,7 +37,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   // start the Ethernet connection:
diff --git a/libraries/Ethernet/examples/WebClientRepeating/WebClientRepeating.ino b/libraries/Ethernet/examples/WebClientRepeating/WebClientRepeating.ino
@@ -51,7 +51,7 @@ void setup() {
   // start serial port:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   // give the ethernet module time to boot up:
diff --git a/libraries/Ethernet/examples/WebServer/WebServer.ino b/libraries/Ethernet/examples/WebServer/WebServer.ino
@@ -36,7 +36,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
 
diff --git a/libraries/GSM/examples/GsmWebClient/GsmWebClient.ino b/libraries/GSM/examples/GsmWebClient/GsmWebClient.ino
@@ -41,7 +41,7 @@ void setup() {
   // initialize serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   Serial.println("Starting Arduino web client.");
diff --git a/libraries/GSM/examples/GsmWebServer/GsmWebServer.ino b/libraries/GSM/examples/GsmWebServer/GsmWebServer.ino
@@ -36,7 +36,7 @@ void setup() {
   // initialize serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   // connection state
diff --git a/libraries/GSM/examples/MakeVoiceCall/MakeVoiceCall.ino b/libraries/GSM/examples/MakeVoiceCall/MakeVoiceCall.ino
@@ -37,7 +37,7 @@ void setup() {
   // initialize serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   Serial.println("Make Voice Call");
diff --git a/libraries/GSM/examples/ReceiveSMS/ReceiveSMS.ino b/libraries/GSM/examples/ReceiveSMS/ReceiveSMS.ino
@@ -34,7 +34,7 @@ void setup() {
   // initialize serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   Serial.println("SMS Messages Receiver");
diff --git a/libraries/GSM/examples/ReceiveVoiceCall/ReceiveVoiceCall.ino b/libraries/GSM/examples/ReceiveVoiceCall/ReceiveVoiceCall.ino
@@ -38,7 +38,7 @@ void setup() {
   // initialize serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   Serial.println("Receive Voice Call");
diff --git a/libraries/GSM/examples/SendSMS/SendSMS.ino b/libraries/GSM/examples/SendSMS/SendSMS.ino
@@ -34,7 +34,7 @@ void setup() {
   // initialize serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   Serial.println("SMS Messages Sender");
diff --git a/libraries/SD/examples/CardInfo/CardInfo.ino b/libraries/SD/examples/CardInfo/CardInfo.ino
@@ -38,7 +38,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
 
diff --git a/libraries/SD/examples/Datalogger/Datalogger.ino b/libraries/SD/examples/Datalogger/Datalogger.ino
@@ -29,7 +29,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
 
diff --git a/libraries/SD/examples/DumpFile/DumpFile.ino b/libraries/SD/examples/DumpFile/DumpFile.ino
@@ -29,7 +29,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
 
diff --git a/libraries/SD/examples/Files/Files.ino b/libraries/SD/examples/Files/Files.ino
diff --git a/libraries/SD/examples/ReadWrite/ReadWrite.ino b/libraries/SD/examples/ReadWrite/ReadWrite.ino
diff --git a/libraries/SD/examples/listfiles/listfiles.ino b/libraries/SD/examples/listfiles/listfiles.ino
diff --git a/libraries/TFT/examples/Arduino/TFTBitmapLogo/TFTBitmapLogo.ino b/libraries/TFT/examples/Arduino/TFTBitmapLogo/TFTBitmapLogo.ino
diff --git a/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/EsploraTFTBitmapLogo.ino b/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/EsploraTFTBitmapLogo.ino
diff --git a/libraries/WiFi/examples/ConnectNoEncryption/ConnectNoEncryption.ino b/libraries/WiFi/examples/ConnectNoEncryption/ConnectNoEncryption.ino
diff --git a/libraries/WiFi/examples/ConnectWithWEP/ConnectWithWEP.ino b/libraries/WiFi/examples/ConnectWithWEP/ConnectWithWEP.ino
diff --git a/libraries/WiFi/examples/ConnectWithWPA/ConnectWithWPA.ino b/libraries/WiFi/examples/ConnectWithWPA/ConnectWithWPA.ino
diff --git a/libraries/WiFi/examples/ScanNetworks/ScanNetworks.ino b/libraries/WiFi/examples/ScanNetworks/ScanNetworks.ino
diff --git a/libraries/WiFi/examples/WiFiChatServer/WiFiChatServer.ino b/libraries/WiFi/examples/WiFiChatServer/WiFiChatServer.ino
diff --git a/libraries/WiFi/examples/WiFiUdpNtpClient/WiFiUdpNtpClient.ino b/libraries/WiFi/examples/WiFiUdpNtpClient/WiFiUdpNtpClient.ino
diff --git a/libraries/WiFi/examples/WiFiUdpSendReceiveString/WiFiUdpSendReceiveString.ino b/libraries/WiFi/examples/WiFiUdpSendReceiveString/WiFiUdpSendReceiveString.ino
diff --git a/libraries/WiFi/examples/WiFiWebClient/WiFiWebClient.ino b/libraries/WiFi/examples/WiFiWebClient/WiFiWebClient.ino
diff --git a/libraries/WiFi/examples/WiFiWebClientRepeating/WiFiWebClientRepeating.ino b/libraries/WiFi/examples/WiFiWebClientRepeating/WiFiWebClientRepeating.ino
diff --git a/libraries/WiFi/examples/WiFiWebServer/WiFiWebServer.ino b/libraries/WiFi/examples/WiFiWebServer/WiFiWebServer.ino

Original file line number	Diff line number	Diff line change
`@@ -23,7 +23,7 @@ void setup() {`
`23`	`23`	`//Initialize serial and wait for port to open:`
`24`	`24`	`Serial.begin(9600);`
`25`	`25`	`while (!Serial) {`
`26`		`- ; // wait for serial port to connect. Needed for Leonardo only`
	`26`	`+ ; // wait for serial port to connect. Needed for native USB port only`
`27`	`27`	`}`
`28`	`28`
`29`	`29`	`// prints title with ending line break`
Original file line number	Diff line number	Diff line change
`@@ -33,7 +33,7 @@ void setup() {`
`33`	`33`	`// start serial port at 9600 bps:`
`34`	`34`	`Serial.begin(9600);`
`35`	`35`	`while (!Serial) {`
`36`		`- ; // wait for serial port to connect. Needed for Leonardo only`
	`36`	`+ ; // wait for serial port to connect. Needed for native USB port only`
`37`	`37`	`}`
`38`	`38`
`39`	`39`	`pinMode(2, INPUT); // digital sensor is on digital pin 2`
Original file line number	Diff line number	Diff line change
`@@ -37,7 +37,7 @@ void setup() {`
`37`	`37`	`// start serial port at 9600 bps and wait for port to open:`
`38`	`38`	`Serial.begin(9600);`
`39`	`39`	`while (!Serial) {`
`40`		`- ; // wait for serial port to connect. Needed for Leonardo only`
	`40`	`+ ; // wait for serial port to connect. Needed for native USB port only`
`41`	`41`	`}`
`42`	`42`
`43`	`43`
Original file line number	Diff line number	Diff line change
`@@ -15,7 +15,7 @@ void setup() {`
`15`	`15`	`// Open serial communications and wait for port to open:`
`16`	`16`	`Serial.begin(9600);`
`17`	`17`	`while (!Serial) {`
`18`		`- ; // wait for serial port to connect. Needed for Leonardo only`
	`18`	`+ ; // wait for serial port to connect. Needed for native USB port only`
`19`	`19`	`}`
`20`	`20`
`21`	`21`	`// send an intro:`
Original file line number	Diff line number	Diff line change
`@@ -20,7 +20,7 @@ void setup() {`
`20`	`20`	`// initialize serial and wait for port to open:`
`21`	`21`	`Serial.begin(9600);`
`22`	`22`	`while (!Serial) {`
`23`		`- ; // wait for serial port to connect. Needed for Leonardo only`
	`23`	`+ ; // wait for serial port to connect. Needed for native USB port only`
`24`	`24`	`}`
`25`	`25`
`26`	`26`	`stringOne = String("stringThree = ");`
Original file line number	Diff line number	Diff line change
`@@ -18,7 +18,7 @@ void setup() {`
`18`	`18`	`// Open serial communications and wait for port to open:`
`19`	`19`	`Serial.begin(9600);`
`20`	`20`	`while (!Serial) {`
`21`		`- ; // wait for serial port to connect. Needed for Leonardo only`
	`21`	`+ ; // wait for serial port to connect. Needed for native USB port only`
`22`	`22`	`}`
`23`	`23`
`24`	`24`	`stringOne = String("Sensor ");`
Original file line number	Diff line number	Diff line change
`@@ -16,7 +16,7 @@ void setup() {`
`16`	`16`	`// Open serial communications and wait for port to open:`
`17`	`17`	`Serial.begin(9600);`
`18`	`18`	`while (!Serial) {`
`19`		`- ; // wait for serial port to connect. Needed for Leonardo only`
	`19`	`+ ; // wait for serial port to connect. Needed for native USB port only`
`20`	`20`	`}`
`21`	`21`
`22`	`22`	`// send an intro:`