Skip to content

Satellite Bridge 1.0.4 - first public preview

Pre-release
Pre-release

Choose a tag to compare

@matpet matpet released this 25 Oct 15:21
· 5 commits to codex/initial-release since this release

Satellite Bridge keeps RUMlogNG as the sole CAT controller of the IC-9700, configured as TRX2. MacDoppler sends UDP radio reports to the bridge; selected frequencies and modes are forwarded to RUMlogNG over TCP.

This is the first public preview of the existing 1.0.4 Intel macOS build.

Included

  • Compact QO-100 pair list and separate Settings editor.
  • QO-100 frequency/mode commands sent once per selection; manual tuning remains available.
  • Continuing, independent uplink/downlink updates only while MacDoppler is selected.
  • Default Digital startup with MacDoppler blocked.
  • QO-100 power ceiling of 5%, with feedback and automatic power-read recovery.
  • RX filter 2 for CW/CW-R; RX filter 1 for USB/USB-D.
  • Actual RUMlogNG panel readback, source indicators and visible incoming UDP packets.
  • Design rationale, setup/operating documentation, a real app screenshot, and a six-page PDF guide.

Downloads

  • Satellite-Bridge-1.0.4-macOS-Intel.zip: app, PDF guide, MIT license and bundled-runtime notices.
  • Satellite-Bridge-Guide-1.0.4.pdf: standalone illustrated guide.
  • SHA256SUMS.txt: checksums for the two downloads.

The app bundles Python 3.12.14 and Tcl/Tk 9.0.4. It was tested on Intel macOS 15.7.3 with RUMlogNG 6.5.1 and MacDoppler 2.48. It is locally ad-hoc signed, not Developer ID signed or notarized. Native Apple Silicon compatibility has not been validated.

Current limitations

  • Feedback reads still force RUMlogNG's Toggle control on. Preserving the operator's setting is planned, not fixed in 1.0.4.
  • RUMlogNG can briefly display a requested frequency before later CAT feedback differs. The app checks stable QO-100 readback and reports a mismatch without automatically retrying a frequency setter.
  • The 5% guard is software with feedback latency, not a hardware RF limiter.
  • Repeater/simplex profiles, CTCSS forwarding and 80% power defaults for MacDoppler/terrestrial operation are planned, not included. This version does not automatically raise power when selecting MacDoppler.

The clean source passes 50 local regression tests. Earlier independent live RX/TX checks and the final one-shot startup observation are summarized in Validation.

Original bridge code and documentation are MIT licensed. Bundled runtime components retain their own licenses.