Skip to content

MitCad 0.67.0: a new interface with a Render workspace, Panelize, sketch Auto Constrain, lathe turning, sheet process profiles, mesh tools

Choose a tag to compare

@mitcad mitcad released this 19 Nov 11:27
· 1 commit to main since this release
  • Interface: one top bar holds the menus, Undo, Redo and every design's
    tab; a workspace block switches between Design, Make, Render and
    Drawing; groups that do not fit fold into a » menu. A Boost
    development button opens the project's donation page; × hides it.
  • Make: the workspace is split into 3D Print, Laser and CNC tabs, with
    Send to Slicer first on 3D Print.
  • Render workspace: rendering in stages, each with its own list and
    card, a live view, Scene and Appearances panels, lights placed by
    numbers, at a face or at the camera, named camera shots, and Render
    All Shots with its results in the Output panel.
  • Drawing workspace: a Drawings card lists the design's drawings with
    their sheets; Sheet…, Add Revision… and Print are in the toolbar.
  • Toolbar and menus come from one layout file with your changes kept
    apart: show or hide tabs, Customize and Reset Toolbar per tab, remove
    a default button, reorder a tab's groups, carry it in Export Settings;
    new Surface, Sheet Metal and Manage tabs. (#421, #422)
  • Command Search shows where each result sits on the toolbar or in the
    menus and finds commands by their other names; any command can be
    added to or removed from Quick Access from its menu.
  • Panelize: split chosen faces of a solid off as panels of a set
    thickness, as bodies or components, step by step so the order decides
    the joints, with Remove Remainder (cabinetry). (#423)
  • Sketch: Auto Constrain finds the relations the geometry already has,
    then adds dimensions until the sketch is fully constrained, for the
    selected curves or the whole sketch, in one undo step.
  • CAM turning: lathe setups and turning tools, facing, roughing and
    finishing of outside and inside diameters, grooving, parting off and
    threading, a Fanuc turning post, and a simulation of the turned
    stock. (#346)
  • Sheet process profiles: material and process decide the allowances;
    Finger Joint and T-Nut Slot at any angle, kerf and nesting on cut
    sheets, living hinges, a flat-pack generator, and board boxes with
    glue flaps, creases and die lines. (#352)
  • Mesh tools for reverse engineering: sections of a mesh into a sketch,
    one or a parallel series, Decimate, Repair, Remove Region, Segment by
    curvature, and Fit Surface as a plane, cylinder, cone, sphere or
    freeform face. (#335)
  • Convert to Sheet Metal in the app: a solid tray becomes sheet metal
    with rips at its corners, also with an inclined base whose walls do
    not meet their bends square. (#377)
  • BUILD: a frame from a sketch, one member along each sketch line with
    its corners mitered or butted. (#386)
  • BUILD: a profile on a plane or a face takes an Offset along the
    normal and a Rotate at any angle, editable later with Placement; a
    placed part's name follows its length, and Press Pull on its free end
    edits the length. (#446, #448)
  • Assemblies: Flexible works on any subassembly, also one without
    joints of its own, so the assembly's joints place each inner part
    alone; a free part keeps its place when its joint is deleted. (#437)
  • Extrude of a body face: To Object (To Selected Face, To Next) and
    Through All, onto the same body or another, for example to level a
    stepped block.
  • Sketch on a planar face: the face's outline is projected into the new
    sketch by default (a Sketch preference), and Convert to Sketch
    Geometry takes a selected profile. (#426)
  • Project: projecting another sketch's curves no longer hides that
    sketch. (#452)
  • Keyboard Shortcuts: a Repeat row for repeating the last command, with
    no default key, so you can bind your own. (#459)
  • Browser: an eye on the Annotations folder hides and shows all
    annotations.
  • Manage tab: Recompute All, Units… and Plastic Rules as commands of
    their own.
  • Drawings: views of many bodies remove hidden lines on all processor
    cores, and small rounded corners stay whole in a view's outline.
    (#425)
  • Fillets: small pieces left between two blend faces are closed, and
    corner plates mesh at the finest settings; large faces' bounds are
    found much faster.
  • .step and .iges import: the memory guard and Cancel stop a running
    transfer, and the message says what to do. (#439)
  • 3D mouse: an installed driver from the device's maker is used on
    Windows, Linux and macOS.
  • macOS: the menu bar keeps File, Edit, View, Tools, Window and Help
    when a second design opens in a tab. (#368)

Each platform's packages were built from its own release candidate of the release branch (release candidate, source commit):

  • Windows: rc4 (dd27c8be5176), web browser component 2026.1119.1103
  • Linux: rc4 (dd27c8be5176), web browser component 2026.1119.1038
  • macOS: rc5 (59c5c13925f4), web browser component 2026.1119.1732