Releases
v0.5.0
Compare
Sorry, something went wrong.
No results found
0.5.0 - 2026-11-09
🚀 Features
Beacon
Match a running beacon to its firmware file
Offer and update Beacons from the beacon checkout
Build
Build INDX firmware on mainline Klipper through indx_klipper
Cartographer
Match a running cartographer to an update image
Update a Cartographer from its firmware clone
Eligibility
Compare Klipper revisions and never downgrade them
Report firmware newer than its target as needing no update
Flash
Send prebuilt firmware to katapult through one validated request
Drive a beacon's dfu bootloader
Send prebuilt firmware to katapult over can too
Flash the Bondtech INDX through its DFU bootloader
Foci
Match a running foci build to its release assets
Look up and download foci releases
Remember the latest release lookup for a while
Offer and update FOCI MCUs from the latest FOCI release
Katapult
Refuse firmware linked for another application start
Moonraker
Read the build versions each mcu reports
Read the serial port a beacon section configures
Read the python klippy runs under
Reboot
Flash a beacon left in its bootloader
Restart klipper once a recovered beacon is back
🐛 Bug Fixes
Agent
Refuse non-http moonraker urls at startup
Eligibility
Recognise Klipper's build suffix on a clean revision
Flash
Verify mcu restart and reconnection around klipper startup
Accept a Beacon bootloader that is already idle after its last block
Wait for USB-CAN bridge identity change
Debounce re-enumerating USB identities before trusting them
Tell settled-but-rejected identities apart in bootloader wait logs
Foci
Recognize FOCI when the host reports no app
General
Validate mcu-reported kconfig before building
Verify self-update archives against published checksums
Cap the self-update archive download at 64 MiB
Bound decoded self-update archive downloads
Bound the direct identify exchange in time and size
Enforce identify deadlines and dictionary boundaries
Report the cause behind a native flash failure
Say that klipper may still be stopped after a post-flash failure
Show the real attempt count while waiting for klipper
Do not report a failed git query as a diverged checkout
Record expanded kconfig and document checkout config writes
Katapult
Resynchronize response frames after stale data
Bound the serial exchange and reject empty reads
Skip can frames katapult never sends instead of failing
Samba
Read the monitor's binary-mode reply instead of racing it
Only treat the 32 kib samd21x18 parts as flashable
Stm32
Refuse to guess the flash offset when the probe is ambiguous
🔧 Refactor
Agent
Check the klipper unit directly
Build
Keep klipper's own extension on the copied artifact
Cli
Share moonraker clients and confirmation prompts
Coordinator
Share build steps and simplify flash errors
Eligibility
Refuse every firmware downgrade through one rule
Flash
Share dispatch for builds and firmware files
Read the can bridge's usb identity through usb_sysfs
Share runtime, offsets, and serial open retries
General
Remove unused flash paths and entry points
Build every sudo -n command through one constructor
Share the failure message between update and flash
Drop the single-implementation checkout port
Route --force through the update selection
Give checkoutrevision one display label
Describe a transport in one place
Read an MCU's reported app and version name in one place
Compare firmware versions in one place
Stop telling users to recalibrate a Cartographer
Logging
Build the console layer and run-log filter once
Self-Update
Download any asset of a github release
Status
Say only that a prebuilt firmware is supported
Usb
Capture only the descriptor fields the report shows
📚 Documentation
General
List FOCI among the third-party firmware aldis updates
List Beacon among the third-party firmware aldis updates
List Cartographer among the third-party firmware aldis updates
Readme
You can’t perform that action at this time.