Repository navigation
Listing Pages and Blocks
Many pages you want to watch are listings: a forum's latest threads, a blog's newest posts, a "recently uploaded" page, a shop's new items. Each entry is a block: a title, a date, a category, a picture, some text.
The Change Threshold normally counts characters (letters and digits of the visible text that changed). On a listing that is a poor measure:
- One new post is a title, a date, a category and an excerpt: easily 100 to 250 characters. Two new posts look like a big change, and a threshold of 100 or 200 cannot tell "two new posts" from "the whole site changed".
- When a post is added at the top, the other posts move down. The word-by-word comparison can then mark scraps of those posts as changed, although they did not.
- A site may reword small text in its posts (labels, dates, file sizes), or a comment counter goes from 0 to 2. Those are not new posts.
Tick Count each changed block (post, item) as one change in Page Settings, Folder Settings or Global Settings. It is off by default, so existing links behave exactly as before.
With it on:
- A block is one change. A post, list item or table row with anything changed in it counts as one change, however much of it changed.
- The Change Threshold is a number of blocks. The slider switches to fine steps: 1 to 25 (one at a time), then 30, 35, 40, 45, 50, 60, 70, and 0 for "all changes". A threshold of 3 means "up to 3 changed blocks are ignored; 4 or more are reported". (Behind the scenes it is stored as characters, 10 per block, so a link saved with 30 means 3 blocks.) Switching the option on or off keeps your threshold as close as the new steps allow.
- The Changes view says it in blocks: "12 blocks changed, 2 over the 10-block threshold". Hover the line for the explanation and the highlighted pieces.
- A block that only moved is not a change, and a block that is nearly the same is not either (see the next section).
- Highlights are on what changed. See "What is highlighted".
- Next / Previous makes one stop per block, however many places inside it are highlighted.
"Ignore changes to numbers" still works: a block whose only differing text is a number does not count.
The outermost repeated element of the page that is still post-sized. An item of a real list (three or more alike elements next to each other: the posts of a feed, the cards of a grid, the rows of a table) may be long, up to about 20,000 characters, because a post can hold its full text behind a "Show more". Anything else is limited to about 1500 characters:
- Every post of a listing, every item of a list, every row of a table is a block.
- "Repeated" means the page has other elements of the same kind next to it (same tag, sharing a class).
- A bigger container that holds many posts is not a block: it is too big. A small piece inside a post (its date, its category) is not a block either: the whole post is.
- Text with no repeated element around it counts as one block per enclosing block-level element.
This is a heuristic. If a page uses unusual markup a post may be split into several blocks, or several posts may count as one. Tell us which page and we can look at it.
This is the setting that matters most for block counting, and it differs from site to site.
Each changed block is compared with the blocks of the old page. If at least this share of its words is also in an old block, the block is treated as the same block and is not counted or highlighted. That covers:
- a post that moved down because a new one was added,
- a comment counter or view count that changed,
- one edited word in a long post.
A real addition or rewrite is far less alike and still counts.
Every changed block is outlined with a brown box in the Changes view, as well as having its text highlighted, and Next / Previous stop at it. A new item whose title is hidden or hard to read (a video thumbnail, for example) has nothing to highlight, but you still see the box around it. Hover the count beside Previous / Next to see what the current change is.
The Alike setting is a setting, so it stays out of the normal bar: there is no button for it there.
- In Page Settings tick Count each changed block (post, item) as one change. A gear button ("Tuning bar") appears next to it. When you close Page Settings, the Changes view loads with the tuning bar showing, once, so you find it.
- The tuning bar sits in the empty middle of the page bar, at its bottom right next to the view controls (only in a narrow window, below about 1150 pixels wide, in a small row under the scan line): Alike, a slider from Loose to Exact (1% to 100%), the percentage and a tick (finished) button. Hover it to see the number of blocks you would get at each setting: "Blocks at each setting: 100%: 17, 90%: 12, 80%: 10, 70%: 9, ...". Pick the setting at a glance instead of trying values one by one.
- Slide it and, when you let go, the page is compared again: the highlights, the block count in the view dropdown and the Next / Previous stops follow it. While you drag, only the percentage next to the slider changes (every step compares the whole page, so it waits until you release; the arrow keys update on each press). The scroll position is kept. 3b. A page that has not changed: with nothing changed there is nothing to compare, so tick All changed on the tuning bar. The Changes view then treats every block as changed, and you can see how the page is divided into blocks and how many there are. Untick it to go back to the real comparison. Nothing is saved. The Alike slider only affects blocks that were edited, so check the blocks with the tick, and tune Alike on real changes with the tick off.
- When it is set the way you want, press the tick: the bar goes away and stays away. To bring it back, open Page Settings and press the gear button next to the block option (it reads "Tuning bar shown" while the bar is on). Turning block counting off removes the bar.
It is saved for that link as you slide, so the next scan uses it. Every link has its own value, because every site differs. The same slider is in Page Settings (with a line saying what the value means), and in Folder Settings and Global Settings as the default for new links. New links start at 60%. The view dropdown ("View Changes (9 blocks)") also shows the counts at each setting when you hover it.
- Start at the default, 60%, then watch the dropdown: it should equal the number of cards or posts you can see are really new or edited.
- If posts that only had small text reworded, or a view count that changed, keep showing up, slide toward Loose (lower). On one test page 90% reported 17 blocks and 60% reported the 9 new cards.
- If real edits are missed, slide toward Exact (higher). At 100% only identical blocks are ignored.
- Turning on Ignore changes to numbers and Ignore changes to dates and times removes most counter and date differences before this setting is even used.
- A block that is an edited version of a block on the old page is highlighted on exactly the text that differs, for example the line under the picture.
- A block with no counterpart on the old page (a new post) is highlighted on its main text: its heading, else its first link.
- The rest of the block, such as the picture, stays clearly visible.
- Posts that were removed are not shown; the Changes view shows the new page and highlights what is new or edited.
- The block option does not change how pages are scanned, only how the result is counted and shown.
- Rescan a page after switching the option on: the Changes view of an earlier scan is recounted when you open it, but the scan decision is made at scan time.
A forum page with a threshold of 3 blocks:
| What happened since the last scan | Counted |
|---|---|
| 2 new threads at the top | 2 blocks: ignored (threshold 3) |
| 2 new threads and the old ones moved down | still 2 blocks |
| A reply counter changed on 4 threads | 0 blocks (the threads are the same to 90%) |
| 5 new threads | 5 blocks: 2 over the threshold, reported |