Raspberry Pi: Setting up

Step 1: Create bootable micro SD card with Raspbian image

1. Download Zip-File on: https://www.raspberrypi.org/downloads/raspbian/
2. Flash file with Etcher to micro SD card

Step 2: Enable ssh to allow remote login

1. Create file called ssh in boot folder - without file extension
2. Open ssh with notepad and insert only one space and nothing more
3. Store file

Step 3: Configure WLAN-Connectivity

1. Create file called wpa_supplicant.conf in boot folder

2. Open file with notepad and insert

   # Datei wpa_supplicant.conf in der Boot-Partition (Raspbian Jessie)
   network={
         ssid="wlan-bezeichnung"
         psk="passwort"
         key_mgmt=WPA-PSK
   }
   

   #Datei wpa_supplicant.conf in der Boot-Partition (Raspbian Stretch)
   country=DE  #omit if US
   ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
   update_config=1
   network={
         ssid="wlan-bezeichnung"
         psk="passwort"
         key_mgmt=WPA-PSK
   }
   

   #Datei wpa_supplicant.conf in der Boot-Partition (Raspbian Buster)
   ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
   update_config=1
   country=DE
   
   network={
       ssid="WiFi SSID"
       psk="WPA/WPA2 passphrase"
       key_mgmt=WPA-PSK
   }
   

Step 4: Boot the Raspberry Pi from the micro SD card

Step 5: Configure Raspberry Pi with sudo raspi-config

  ```
  4 Localisation Options -> I1 Change Locale -> de_DE.UTF-8
  4 Localisation Options -> I2 Change Timezone -> Europe -> Berlin
  7 Advanced Options -> A1 Expand Filesystem
  8 Update
  ```

Step 6: Update system with sudo apt-get update and sudo apt-get upgrade