Skip to content

orcad2kicad 1.0.1: importer defect cleanup, re-conversion fix, GUI improvements / 임포터 결함 정리, 재변환 버그 수정, GUI 개선

Choose a tag to compare

@nerdvana-sj nerdvana-sj released this 11 Sep 00:50
· 13 commits to main since this release

orcad2kicad 1.0.1

한국어 설명은 아래에 있습니다.

Maintenance release of orcad2kicad, an open-source tool (MIT) that converts OrCAD schematics (EDIF/.DSN) into KiCad 10.0 projects and verifies them against a PADS netlist. It adds post-processing for defects left by the KiCad nightly OrCAD importer, GUI usability improvements, and a fix for converting again into the same folder.

What's new

  • Importer defect post-processing (on by default, --no-import-cleanup turns it off)
    • "Hop gaps", where wires were cut at each crossing and filled with graphic lines, are merged into a single wire (netlist identical before and after)
    • Net alias labels in the middle of wires are moved to free wire ends and rotated to follow KiCad conventions. In measured projects ERC unconnected_wire_endpoint went from 177 to 0 and from 84 to 0
    • The overlap of the OrCAD title block and the KiCad default drawing sheet is resolved with a blank drawing sheet (blank.kicad_wks)
  • Bug fix: converting a .DSN again into the same output folder left the first page file of the previous run, so reconstruction to the stable format was skipped (the root stayed in nightly format and KiCad 10.0 could not open it) and the first page kept its old content
  • GUI: language default "Auto (system language)", per-type log line colors, tab highlighting and item counts, emphasized status text (shows "items to check" when there are any), a detail window in the board difference tab, a font and spacing theme, app and exe icons
  • Removed the company contact line at the end of the result summary

Download

  • Windows 64-bit executables: orcad2kicad-1.0.1-win64.zip (GUI orcad2kicad.exe + CLI/MCP orcad2kicad-cli.exe)
  • From source (Windows/Linux/macOS): git clone, then see README.en.md

Integrity check (SHA-256)

SHA256(orcad2kicad-1.0.1-win64.zip) = 3cac2fcaa7ae1c26bfb49d32d28dc466f38619af1958b0fb0da0a3b1dd6e77bc

PowerShell: Get-FileHash orcad2kicad-1.0.1-win64.zip -Algorithm SHA256

Requirements

  • Windows 10/11 64-bit (exe). Running from source needs Python 3.10+ (standard library only).
  • KiCad 10.0 (kicad-cli, for netlist verification, ERC and PDF). Direct .DSN input needs KiCad nightly 10.99+, which the GUI button "Prepare portable KiCad nightly (no install)" downloads and extracts.

orcad2kicad 1.0.1

OrCAD 회로도(EDIF/.DSN)를 KiCad 10.0 프로젝트로 변환하고 PADS 넷리스트로 검증하는 오픈소스 도구(MIT)의
유지보수 릴리스입니다. KiCad 나이틀리 OrCAD 임포터가 남기는 결함을 정리하는 후처리와 GUI 사용성 개선,
같은 폴더에 다시 변환할 때의 버그 수정이 들어 있습니다.

무엇이 새로운가

  • 임포터 결함 후처리(기본 켜짐, --no-import-cleanup으로 끔)
    • 교차점마다 배선을 끊고 그래픽 선으로 메워 두던 "hop 갭"을 하나의 배선으로 병합 (넷리스트 전후 동일)
    • 배선 중간에 놓인 넷 별칭 라벨을 배선의 자유단으로 옮기고 회전을 KiCad 관례에 맞춤
      → 실측 프로젝트에서 ERC unconnected_wire_endpoint가 177 → 0, 84 → 0
    • OrCAD 타이틀블록과 KiCad 기본 도면 양식이 겹쳐 보이던 문제를 빈 도면 양식(blank.kicad_wks)으로 해소
  • 버그 수정: 같은 출력 폴더에 .DSN을 다시 변환하면 이전 실행의 첫 페이지 파일이 남아 정식 포맷
    재구성이 건너뛰어지고(루트가 나이틀리 포맷으로 남아 KiCad 10.0이 열지 못함) 첫 페이지가 옛 내용으로
    남던 문제
  • GUI: 언어 "자동(시스템 언어)" 기본값, 로그 줄 종류별 색 구분, 탭 강조와 항목 개수, 상태 문구 강조
    (확인할 항목이 있으면 "확인할 항목 있음"으로 정확히 표시), 보드 차이 탭의 상세 창, 글꼴·여백 테마,
    앱/exe 아이콘
  • 결과 요약 끝의 회사 문의 문구 제거

다운로드

  • Windows 64비트 실행 파일: orcad2kicad-1.0.1-win64.zip (GUI orcad2kicad.exe + CLI/MCP orcad2kicad-cli.exe)
  • 소스에서 실행(Windows/Linux/macOS): git clone 후 README.md 참조

무결성 확인 (SHA-256)

SHA256(orcad2kicad-1.0.1-win64.zip) = 3cac2fcaa7ae1c26bfb49d32d28dc466f38619af1958b0fb0da0a3b1dd6e77bc

PowerShell: Get-FileHash orcad2kicad-1.0.1-win64.zip -Algorithm SHA256

요구 사항

  • Windows 10/11 64비트 (exe). 소스 실행은 Python 3.10+ (표준 라이브러리만 사용)
  • KiCad 10.0 (kicad-cli, 넷리스트 검증·ERC·PDF). .DSN 직접 입력은 KiCad 나이틀리 10.99+ 필요 —
    GUI의 "나이틀리 KiCad 포터블 준비(설치 없음)" 버튼으로 다운로드·압축 해제만 해서 쓸 수 있습니다.

전체 변경 내역: CHANGELOG.md