Repository navigation
Releases
orcad2kicad 1.0.8: GUI fields follow a new input file / 입력 파일을 바꾸면 자동 칸도 갱신
orcad2kicad 1.0.8
한국어 설명은 아래에 있습니다.
Fix release of orcad2kicad, an open-source tool (MIT) that converts OrCAD schematics (EDIF/.DSN) into KiCad 10.0 projects and verifies the result.
What's new
- Fields follow a new input file. Dropping or picking another design from the same folder left the output folder and project name of the previous design. Fields that still hold the values auto-filled from the previous file (output folder, project name, netlist, board) now follow the new file, and values you edited are kept. Values restored from saved settings are judged the same way.
Download
- Windows 64-bit executables:
orcad2kicad-1.0.8-win64.zip(GUIorcad2kicad.exe+ CLI/MCPorcad2kicad-cli.exe) - From source (Windows/Linux/macOS):
git clone, then see README.en.md
Integrity check (SHA-256)
SHA256(orcad2kicad-1.0.8-win64.zip) = 6cc878228642674b192d23cabb13f6fabde53f13e32ab382ffe3624411c99fed
PowerShell: Get-FileHash orcad2kicad-1.0.8-win64.zip -Algorithm SHA256
Requirements
Windows exe, or Python 3.10+ from source (Windows/Linux/macOS). Normal use needs stable KiCad 10.0.
Reading a .DSN without OrCAD needs a KiCad nightly, which the "prepare portable nightly" feature sets up without installing anything.
See README.en.md, docs/Quick_Start.en.md and docs/User_Manual.en.md for usage.
orcad2kicad 1.0.8
OrCAD 회로도(EDIF/.DSN)를 KiCad 10.0 프로젝트로 변환하고 결과를 검증하는 오픈소스 도구(MIT)의 수정 릴리스입니다.
무엇이 새로운가
- 입력 파일을 바꾸면 자동 칸도 따라 바뀜. 같은 폴더에 있는 다른 설계를 끌어다 놓거나 파일 선택으로 바꾸면 출력 폴더와 프로젝트 이름이 이전 설계 이름으로 남던 것을 고쳤습니다. 이전 파일에서 자동으로 채운 값 그대로인 칸(출력 폴더, 프로젝트 이름, 넷리스트, 보드)은 새 파일 기준으로 바뀌고, 직접 고친 값은 유지합니다. 저장된 설정으로 복원한 값도 같은 기준으로 판단합니다.
다운로드
- Windows 64비트 실행 파일:
orcad2kicad-1.0.8-win64.zip(GUIorcad2kicad.exe+ CLI/MCPorcad2kicad-cli.exe) - 소스에서 실행(Windows/Linux/macOS):
git clone후 README.md 참조
무결성 확인 (SHA-256)
SHA256(orcad2kicad-1.0.8-win64.zip) = 6cc878228642674b192d23cabb13f6fabde53f13e32ab382ffe3624411c99fed
PowerShell: Get-FileHash orcad2kicad-1.0.8-win64.zip -Algorithm SHA256
요구 사항
Windows exe 또는 Python 3.10+(소스 실행, Windows/Linux/macOS). 일반 사용에는 정식 KiCad 10.0이 필요합니다.
.DSN을 OrCAD 없이 읽으려면 KiCad 나이틀리가 필요하고, "나이틀리 포터블 준비" 기능으로 설치 없이 준비할 수 있습니다.
자세한 사용법은 README.md, docs/Quick_Start.md, docs/사용자설명서.md를 참조하십시오.
orcad2kicad 1.0.7: bottom-only pads, PADS unit fixes / 바닥층 패드 복원, PADS 단위 수정
orcad2kicad 1.0.7
한국어 설명은 아래에 있습니다.
Fix release of orcad2kicad, an open-source tool (MIT) that converts OrCAD schematics (EDIF/.DSN) into KiCad 10.0 projects and verifies the result.
What's new
- Bottom-only pads restored. SMD pads whose PADS pad stack has top size 0 and bottom size above 0 (for example hot-swap sockets soldered on the back) were imported as 0.001 mm pads on the part side. They now get their real layer and size. On two measured boards, DRC unconnected items went from 5 to 0 and from 2 to 0.
--keep-board-padsturns this off. - PADS unit fixes.
INCHESfiles are now recognized, which removes a 76.2 mm mask clearance left by the importer. The CAM pad oversize advice for METRIC files is fixed. Decal values use the decal's own unit in files other than BASIC. - Clear message for
.pcbboards. Giving a PADS binary.pcbto--boardused to end with an exception. It now ends with a message to export ASCII in PADS.
Download
- Windows 64-bit executables:
orcad2kicad-1.0.7-win64.zip(GUIorcad2kicad.exe+ CLI/MCPorcad2kicad-cli.exe) - From source (Windows/Linux/macOS):
git clone, then see README.en.md
Integrity check (SHA-256)
SHA256(orcad2kicad-1.0.7-win64.zip) = d7a5cca309d887a369f400a1c71045165b9a5ccc035675b9b0e3b895a3833bcc
PowerShell: Get-FileHash orcad2kicad-1.0.7-win64.zip -Algorithm SHA256
Requirements
Windows exe, or Python 3.10+ from source (Windows/Linux/macOS). Normal use needs stable KiCad 10.0.
Reading a .DSN without OrCAD needs a KiCad nightly, which the "prepare portable nightly" feature sets up without installing anything.
See README.en.md, docs/Quick_Start.en.md and docs/User_Manual.en.md for usage.
orcad2kicad 1.0.7
OrCAD 회로도(EDIF/.DSN)를 KiCad 10.0 프로젝트로 변환하고 결과를 검증하는 오픈소스 도구(MIT)의 수정 릴리스입니다.
무엇이 새로운가
- 바닥층 전용 패드 복원. PADS 패드 스택이 윗면 크기 0, 바닥면 크기 0 초과인 SMD 패드(뒷면에 납땜하는 핫스왑 소켓 등)가 부품 면의 0.001 mm 패드로 임포트되던 것을 실제 면과 크기로 되돌립니다. 실측 보드 2개의 DRC 미연결이 5건에서 0건, 2건에서 0건이 됐습니다.
--keep-board-pads로 끌 수 있습니다. - PADS 단위 처리 수정.
INCHES파일을 인식해 임포터가 남기던 76.2 mm 마스크 여유값을 없앴습니다. METRIC 파일의 CAM 패드 오버사이즈 안내값을 고쳤습니다. BASIC이 아닌 파일에서 디칼 값은 디칼 자기 단위로 읽습니다. .pcb보드 안내.--board에 PADS 바이너리.pcb를 주면 예외로 끝나던 것을, PADS에서 ASCII로 내보내라는 안내로 끝나게 했습니다.
다운로드
- Windows 64비트 실행 파일:
orcad2kicad-1.0.7-win64.zip(GUIorcad2kicad.exe+ CLI/MCPorcad2kicad-cli.exe) - 소스에서 실행(Windows/Linux/macOS):
git clone후 README.md 참조
무결성 확인 (SHA-256)
SHA256(orcad2kicad-1.0.7-win64.zip) = d7a5cca309d887a369f400a1c71045165b9a5ccc035675b9b0e3b895a3833bcc
PowerShell: Get-FileHash orcad2kicad-1.0.7-win64.zip -Algorithm SHA256
요구 사항
Windows exe 또는 Python 3.10+(소스 실행, Windows/Linux/macOS). 일반 사용에는 정식 KiCad 10.0이 필요합니다.
.DSN을 OrCAD 없이 읽으려면 KiCad 나이틀리가 필요하고, "나이틀리 포터블 준비" 기능으로 설치 없이 준비할 수 있습니다.
자세한 사용법은 README.md, docs/Quick_Start.md, docs/사용자설명서.md를 참조하십시오.
orcad2kicad 1.0.6: PADS board solder mask cleanup / PADS 보드 솔더마스크 정리
orcad2kicad 1.0.6
한국어 설명은 아래에 있습니다.
Feature release of orcad2kicad, an open-source tool (MIT) that converts OrCAD schematics (EDIF/.DSN) into KiCad 10.0 projects and verifies them against a reference netlist. When a PADS board (--board .asc) is supplied, the solder mask that the KiCad PADS board importer transfers incorrectly is corrected from the CAM settings in the PADS file. The schematic and its connections (nets) do not change.
What's new
- Missing pad mask openings restored. PADS creates an opening when the CAM solder mask document draws the pad, even if the padstack has no mask, but the importer does not read this setting, so through-hole pad openings were missing or missing on the back side only.
F.Mask/B.Maskare filled in according to the CAM document (vias only on sides where the CAM document draws copper vias). All 159 through-hole pads on the example board have front and back openings. - Importer's fixed mask clearance corrected. The importer writes the number 3 into
pad_to_mask_clearancein file units, which is 3 mm in a metric PADS file (openings 6 mm larger than the pad). Only this fixed value is changed to 0 (the KiCad default). The PADS CAM pad oversize is not applied and is reported in the log andauto_changes.txt(applied as is, it can remove the mask between IC pins at 0.5 to 0.65 mm pitch). - Documentation drawings moved off the mask. The importer sends UNASSIGNED PADS layers 25/28 to
F.Mask/B.Mask, so drawings such as decal outlines became mask openings. Only drawings whose coordinates and line width match a decal piece are moved toCmts.User(10 on the example board, KiCad DRC mask violations 199 → 0). - Reporting. The
board mask:log line, thePCB:item inAUTO CHANGES, andauto_changes.txt. EDIF input now reports automatic changes too. Use--keep-board-masksto turn this off. When a.kicad_pcbis given directly, nothing is changed and only the number of pads without openings is reported as a warning.
Compared with private production PADS boards and their PADS fabrication Gerbers: opening positions match 90/90 on front and back (20/56 before cleanup). Before fabrication, we recommend overlaying the KiCad mask Gerber on the PADS mask Gerber (User Manual section 4.5).
Download
- Windows 64-bit executables:
orcad2kicad-1.0.6-win64.zip(GUIorcad2kicad.exe+ CLI/MCPorcad2kicad-cli.exe) - From source (Windows/Linux/macOS):
git clone, then see README.en.md
Integrity check (SHA-256)
SHA256(orcad2kicad-1.0.6-win64.zip) = 23c08a9e8f9239131df2e630d227941eca97c872242dbfe205411f267fd50198
PowerShell: Get-FileHash orcad2kicad-1.0.6-win64.zip -Algorithm SHA256
Requirements
Windows exe, or Python 3.10+ from source (Windows/Linux/macOS). Normal use needs stable KiCad 10.0.
Reading a .DSN without OrCAD needs a KiCad nightly, which the "prepare portable nightly" feature sets up without installing anything.
See README.en.md, docs/Quick_Start.en.md and docs/User_Manual.en.md for usage.
orcad2kicad 1.0.6
OrCAD 회로도(EDIF/.DSN)를 KiCad 10.0 프로젝트로 변환하고 기준 넷리스트로 검증하는 오픈소스 도구(MIT)의
기능 릴리스입니다. PADS 보드(--board .asc)를 함께 줄 때, KiCad PADS 보드 임포터가 틀리게 옮기는 솔더마스크를
PADS 파일 안의 CAM 설정대로 바로잡습니다. 회로도와 연결(넷)은 바뀌지 않습니다.
무엇이 새로운가
- 빠진 패드 마스크 개구 복원. PADS 는 패드스택에 마스크가 없어도 CAM 솔더마스크 문서가 패드를 그리면 개구를
만들지만, 임포터는 이 설정을 읽지 않아 스루홀 패드 개구가 없거나 뒷면만 빠졌습니다. CAM 대로F.Mask/B.Mask를
채웁니다(비아는 CAM 이 구리 비아를 그리는 면만). 예시 보드 스루홀 159개 전부 앞·뒤 개구. - 임포터 고정 마스크 여유값 교정. 임포터는
pad_to_mask_clearance에 숫자 3 을 파일 단위 그대로 넣습니다 — 미터
단위 PADS 파일이면 3 mm(개구가 패드보다 6 mm 크게). 이 고정값일 때만 0(KiCad 기본값)으로 바꾸고, PADS CAM 패드
오버사이즈는 적용하지 않고 로그·auto_changes.txt로 알립니다(그대로 넣으면 0.5~0.65 mm 피치 IC 핀 사이 마스크가
사라질 수 있음). - 마스크로 들어간 문서용 그림 이동. 임포터는 용도 미지정(UNASSIGNED) PADS 레이어 25/28 을
F.Mask/B.Mask로
보내, 디칼의 외곽선 같은 그림이 마스크 개구가 됐습니다. 디칼 조각과 좌표·선폭이 맞는 그림만Cmts.User로
옮깁니다(예시 보드 10개, KiCad DRC 마스크 위반 199 → 0). - 고지. 로그
board mask:줄,AUTO CHANGES의PCB:항목,auto_changes.txt. EDIF 입력에서도 자동 변경을
알립니다. 끄려면--keep-board-masks..kicad_pcb를 직접 주면 고치지 않고 개구 없는 패드 수만 경고합니다.
비공개 실무 PADS 보드와 그 PADS 제조 거버로 대조: 개구 위치 앞·뒤 90/90 일치(정리 전 20/56).
제조 전에는 KiCad 마스크 거버를 PADS 마스크 거버와 겹쳐 보는 것을 권합니다(사용자설명서 4.5절).
다운로드
- Windows 64비트 실행 파일:
orcad2kicad-1.0.6-win64.zip(GUIorcad2kicad.exe+ CLI/MCPorcad2kicad-cli.exe) - 소스에서 실행(Windows/Linux/macOS):
git clone후 README.md 참조
무결성 확인 (SHA-256)
SHA256(orcad2kicad-1.0.6-win64.zip) = 23c08a9e8f9239131df2e630d227941eca97c872242dbfe205411f267fd50198
PowerShell: Get-FileHash orcad2kicad-1.0.6-win64.zip -Algorithm SHA256
요구 사항
Windows exe 또는 Python 3.10+ (Windows/Linux/macOS, 소스에서 실행). 일반 사용에는 정식(stable) KiCad 10.0.
.DSN 을 OrCAD 없이 읽으려면 KiCad 나이틀리(도구 내 "나이틀리 포터블 준비" 기능으로 설치 없이 준비 가능).
자세한 사용법은 README.md 및 docs/Quick_Start.md, docs/사용자설명서.md 를 참조하십시오.
orcad2kicad 1.0.5: split bus-merged nets, automatic change report, hidden label options / 버스로 합쳐진 넷 나누기, 자동 변경 고지, 숨은 라벨 설명·선택
orcad2kicad 1.0.5
한국어 설명은 아래에 있습니다.
Feature release of orcad2kicad, an open-source tool (MIT) that converts OrCAD schematics (EDIF/.DSN) into KiCad 10.0 projects and verifies them against a reference netlist. In .DSN import results it splits bus nets the KiCad importer merged by mistake, explains hidden labels that were invisible on screen and lets you choose how to handle them, and reports everything the tool changes in the schematic automatically.
What's new
- Splitting nets merged through a bus (a change to connectivity). Where a wire touches a bus directly without a bus entry, the importer places a junction, and KiCad then merges all data lines touching that bus into one net. Those junctions are removed (only if the netlist just splits) to restore the original nets, and the touch points are redrawn with KiCad bus entries (netlist names and pins are checked to be identical). Split nets are reported by name in a warning. Use
--keep-bus-junctionsto turn this off. - Automatic change report. The
AUTO CHANGESlist in the log,auto_changes.txtin the output folder, and the result summary list the items, counts and what to check. Changes that alter connections come first. - Hidden (transparent) label explanation and choice. Duplicates are removed automatically, and the remaining ones are listed with name, page and reason.
--hidden-labels {keep,show,shrink}(defaultkeep):showreveals them as small light gray labels andshrinkhides them in PDF too. Hidden labels are turned so that they do not cover wires in PDF. The same choice is available in the GUI and MCP. - Invisible net merge warning. Places where a hidden label and a power symbol or label of another name share a wire and merge two nets are reported, and hidden power labels sitting directly on part pins are replaced by visible power symbols.
- Netlist comparison at each cleanup step. If the kicad-cli netlist (names + pins) differs before and after cleanup, the risky step is left out and cleanup is retried, or the change is reverted. A bug where moving labels merged bus member nets was also fixed.
- Drawing cleanup. Pin number text longer than the pin is reduced, labels attached to pin ends without a wire face away from the part body, and off-page connector recognition is wider (if the connector text differs from the real net name, it stays a drawing and a warning is shown).
--duplicate-alias-labels removeoption: removes local alias labels that overlap a same-named global label on the same wire.- With
--netlistand no board, footprint names without a library are no longer filled in (they only produced KiCad warnings).
On the public Raspberry Pi Compute Module IO Board V3 design: stable KiCad 10.0 ERC 68, hidden labels 1,335 → 4, IPC-D-356 netlist 152/152 match.
Download
- Windows 64-bit executables:
orcad2kicad-1.0.5-win64.zip(GUIorcad2kicad.exe+ CLI/MCPorcad2kicad-cli.exe) - From source (Windows/Linux/macOS):
git clone, then see README.en.md
Integrity check (SHA-256)
SHA256(orcad2kicad-1.0.5-win64.zip) = 201fec58bff9eee40ee254ac330d93aae7f98601159cbea0cb3ba54939b8fbd0
PowerShell: Get-FileHash orcad2kicad-1.0.5-win64.zip -Algorithm SHA256
Requirements
Windows exe, or Python 3.10+ from source (Windows/Linux/macOS). Normal use needs stable KiCad 10.0.
Reading a .DSN without OrCAD needs a KiCad nightly, which the "prepare portable nightly" feature sets up without installing anything.
See README.en.md, docs/Quick_Start.en.md and docs/User_Manual.en.md for usage.
orcad2kicad 1.0.5
OrCAD 회로도(EDIF/.DSN)를 KiCad 10.0 프로젝트로 변환하고 기준 넷리스트로 검증하는 오픈소스 도구(MIT)의
기능 릴리스입니다. .DSN 임포트 결과에서 KiCad 임포터가 잘못 합친 버스 넷을 나누고, 화면에 안 보이던 숨은 라벨을
설명·선택할 수 있게 했으며, 도구가 회로도를 자동으로 바꾼 모든 것을 알리도록 했습니다.
무엇이 새로운가
- 버스로 합쳐진 넷 나누기(연결이 바뀌는 변경). 배선이 버스 엔트리 없이 버스에 바로 닿은 곳에 임포터가 접속점을
찍으면, KiCad 는 그 버스에 닿은 데이터선을 전부 한 넷으로 합칩니다. 그 접속점을 지워(넷리스트가 나뉘기만 할 때만)
원래 넷으로 나누고, 닿은 자리를 KiCad 버스 엔트리로 다시 그립니다(넷리스트 이름·핀 동일 확인). 나뉜 넷은 이름까지
경고로 알립니다. 끄려면--keep-bus-junctions. - 자동 변경 고지. 로그의
AUTO CHANGES목록, 출력 폴더의auto_changes.txt, 결과 요약에 도구가 바꾼 항목·개수·
확인할 점을 적습니다. 연결이 바뀌는 변경은 맨 앞에 둡니다. - 숨은(투명) 라벨 설명과 선택. 중복은 자동으로 지우고, 남은 것은 이름·페이지·이유를 보여 줍니다.
--hidden-labels {keep,show,shrink}(기본keep):show는 작고 옅은 회색 라벨로 드러내고,shrink는 PDF 에서도
감춥니다. 숨은 라벨은 PDF 에서 배선을 덮지 않게 방향을 돌립니다. GUI·MCP 에도 같은 선택. - 보이지 않는 넷 합쳐짐 경고. 숨은 라벨과 다른 이름의 전원 심볼·라벨이 한 배선에 있어 두 넷이 합쳐진 곳을 경고하고,
부품 핀에 바로 붙은 숨은 전원 라벨은 보이는 전원 심볼로 바꿉니다. - 정리 단계마다 넷리스트 대조. 정리 전후 kicad-cli 넷리스트(이름+핀)가 다르면 위험한 단계를 빼고 다시 하거나
되돌립니다. 라벨 이동이 버스 멤버 넷을 합치던 버그도 고쳤습니다. - 도면 정리. 핀보다 긴 핀 번호 글자를 줄이고, 배선 없이 핀 끝에 붙은 라벨을 몸체 바깥으로 향하게 하고,
오프페이지 커넥터 인식을 넓혔습니다(커넥터 글자 ≠ 실제 넷 이름이면 그림으로 두고 경고). --duplicate-alias-labels remove옵션: 같은 배선의 같은 이름 전역 라벨과 겹치는 지역 별칭 라벨을 지웁니다.- 보드 없이
--netlist만 줄 때 라이브러리 없는 풋프린트 이름을 채우지 않습니다(KiCad 경고만 만들었음).
공개 설계 Raspberry Pi Compute Module IO Board V3 기준: 정식 KiCad 10.0 ERC 68건, 숨은 라벨 1,335 → 4개, IPC-D-356
넷리스트 152/152 일치.
다운로드
- Windows 64비트 실행 파일:
orcad2kicad-1.0.5-win64.zip(GUIorcad2kicad.exe+ CLI/MCPorcad2kicad-cli.exe) - 소스에서 실행(Windows/Linux/macOS):
git clone후 README.md 참조
무결성 확인 (SHA-256)
SHA256(orcad2kicad-1.0.5-win64.zip) = 201fec58bff9eee40ee254ac330d93aae7f98601159cbea0cb3ba54939b8fbd0
PowerShell: Get-FileHash orcad2kicad-1.0.5-win64.zip -Algorithm SHA256
요구 사항
Windows exe 또는 Python 3.10+ (Windows/Linux/macOS, 소스에서 실행). 일반 사용에는 정식(stable) KiCad 10.0.
.DSN 을 OrCAD 없이 읽으려면 KiCad 나이틀리(도구 내 "나이틀리 포터블 준비" 기능으로 설치 없이 준비 가능).
자세한 사용법은 README.md 및 docs/Quick_Start.md, docs/사용자설명서.md 를 참조하십시오.
orcad2kicad 1.0.4: .DSN import cleanup, Korean text, net name options / .DSN 임포트 결과 정리, 한글 표시, 넷 이름 옵션
orcad2kicad 1.0.4
한국어 설명은 아래에 있습니다.
Feature release of orcad2kicad, an open-source tool (MIT) that converts OrCAD schematics (EDIF/.DSN) into KiCad 10.0 projects and verifies them against a reference netlist. .DSN import results are cleaned up to be closer to the OrCAD original, Korean text is displayed, and users can choose how net names are handled.
What's new
- Net name default changed: no artificial global labels. OrCAD page aliases (
RTS#,DTR#and so on) become KiCad local labels and unnamed nets keep KiCad automatic names (aliases and automatic nets are not turned into global labels, so same-named aliases on different pages do not merge). For.DSNinput the transparent global labels added by the importer are removed only when the pin groups in the KiCad netlist before and after are the same. The previous behavior (keeping PADS and OrCAD names) is--net-names keep. - Board net names follow the schematic (default). With a PADS board, net names in the output
.kicad_pcbare changed to the schematic names so that Update PCB from Schematic does not rename nets (the match count is reported in[4b]). Use--board-net-names padsto keep the PADS names. - GUI options with a live description. Added the options "Net names", "Board net names", "Hide hidden labels in PDF" and "Korean font". The result of the selected combination (example net names, and whether they match when PADS is imported separately) is shown below the options. The result summary shows the number of changed net names and the board/schematic net name match count. MCP
converthas the same options. - Korean text. Text, labels, properties and pin names containing Korean get a Korean font (default
Malgun Gothic,--korean-font), because the KiCad default font does not draw Korean andArialdraws boxes. For.DSNinput, strings broken by the importer reading CP949 Korean as Latin-1 are also restored. - More
.DSNimport cleanup.- Off-page connectors become KiCad global labels (the importer turned them into a red drawing, text and a transparent label).
- Duplicate transparent labels that printed black in PDF/SVG are removed (netlist names and pins are compared, and the change is reverted on a difference). Use
--hidden-labels shrinkto hide the remaining ones. - Wire width is set to the KiCad default (the importer wrote 0.254 mm, which looked thick;
--keep-wire-widthkeeps it).
Download
- Windows 64-bit executables:
orcad2kicad-1.0.4-win64.zip(GUIorcad2kicad.exe+ CLI/MCPorcad2kicad-cli.exe) - From source (Windows/Linux/macOS):
git clone, then see README.en.md
Integrity check (SHA-256)
SHA256(orcad2kicad-1.0.4-win64.zip) = de9b481b3a90b539e595df23a90ced21f235a3730f90be87d304dde5b5b739ed
PowerShell: Get-FileHash orcad2kicad-1.0.4-win64.zip -Algorithm SHA256
Requirements
Windows exe, or Python 3.10+ from source (Windows/Linux/macOS). Normal use needs stable KiCad 10.0.
Reading a .DSN without OrCAD needs a KiCad nightly, which the "prepare portable nightly" feature sets up without installing anything.
See README.en.md, docs/Quick_Start.en.md and docs/User_Manual.en.md for usage.
orcad2kicad 1.0.4
OrCAD 회로도(EDIF/.DSN)를 KiCad 10.0 프로젝트로 변환하고 기준 넷리스트로 검증하는 오픈소스 도구(MIT)의
기능 릴리스입니다. .DSN 임포트 결과를 OrCAD 원본에 더 가깝게 정리하고, 한글이 보이게 하고, 넷 이름을
어떻게 다룰지 사용자가 고를 수 있게 했습니다.
무엇이 새로운가
- 넷 이름 기본 동작 변경 — 인위적 전역화 없음. OrCAD 페이지 별칭(
RTS#·DTR#등)은 KiCad 지역 라벨로,
이름 없는 넷은 KiCad 자동 이름으로 둡니다(별칭·자동 넷을 전역 라벨로 만들지 않아, 다른 페이지의 같은 이름
별칭이 서로 합쳐지지 않습니다)..DSN입력에서는 임포터가 덧붙인 투명 전역 라벨을 지우되, 전후 KiCad
넷리스트의 핀 구성을 대조해 같을 때만 적용합니다. 예전 동작(PADS·OrCAD 이름 유지)은--net-names keep. - 보드 넷 이름을 회로도에 맞춤(기본). PADS 보드를 함께 주면 출력
.kicad_pcb의 넷 이름을 회로도 이름으로
바꿔, Update PCB from Schematic 에서 넷 이름이 바뀌지 않습니다([4b]에 일치 수 보고). PADS 이름 그대로는
--board-net-names pads. - GUI 옵션과 실시간 설명. "넷 이름"·"보드 넷 이름"·"PDF에서 숨은 라벨 감추기"·"한글 글꼴" 옵션을 넣고,
고른 조합이 어떤 결과가 되는지(넷 이름 예, 따로 PADS 를 임포트할 때 맞는지)를 옵션 아래에 바로 보여 줍니다.
결과 요약에는 바뀐 넷 이름 수와 보드/회로도 넷 이름 일치 수가 나옵니다. MCPconvert에도 같은 옵션. - 한글 표시. 한글이 든 글자·라벨·속성·핀 이름에 한글 글꼴(기본
Malgun Gothic,--korean-font)을
지정합니다(KiCad 기본 글꼴은 한글을 그리지 않고Arial은 네모로 그림)..DSN입력에서는 임포터가 CP949
한글을 Latin-1 로 읽어 깨뜨린 문자열도 되돌립니다. .DSN임포트 결과 정리 추가.- 오프페이지 커넥터를 KiCad 전역 라벨로 (임포터는 빨간 그림 + 글자 + 투명 라벨로 옮겼음).
- PDF/SVG 에 검게 찍히던 중복 투명 라벨 제거 (넷리스트 이름·핀 대조, 다르면 되돌림).
남은 것도 감추려면--hidden-labels shrink. - 배선 폭을 KiCad 기본값으로 (임포터가 0.254 mm 를 박아 굵게 보였음, 유지는
--keep-wire-width).
다운로드
- Windows 64비트 실행 파일:
orcad2kicad-1.0.4-win64.zip(GUIorcad2kicad.exe+ CLI/MCPorcad2kicad-cli.exe) - 소스에서 실행(Windows/Linux/macOS):
git clone후 README.md 참조
무결성 확인 (SHA-256)
SHA256(orcad2kicad-1.0.4-win64.zip) = de9b481b3a90b539e595df23a90ced21f235a3730f90be87d304dde5b5b739ed
PowerShell: Get-FileHash orcad2kicad-1.0.4-win64.zip -Algorithm SHA256
요구 사항
Windows exe 또는 Python 3.10+ (Windows/Linux/macOS, 소스에서 실행). 일반 사용에는 정식(stable) KiCad 10.0.
.DSN 을 OrCAD 없이 읽으려면 KiCad 나이틀리(도구 내 "나이틀리 포터블 준비" 기능으로 설치 없이 준비 가능).
자세한 사용법은 README.md 및 docs/Quick_Start.md, docs/사용자설명서.md 를 참조하십시오.
orcad2kicad 1.0.3: EDIF board version, net alias and dotted name fixes, GUI drag and drop / EDIF 보드 버전·넷 별칭·점 포함 이름 버그 수정, GUI 끌어다 놓기
orcad2kicad 1.0.3
한국어 설명은 아래에 있습니다.
Maintenance release of orcad2kicad, an open-source tool (MIT) that converts OrCAD schematics (EDIF/.DSN) into KiCad 10.0 projects and verifies them against a reference netlist. It fixes 3 bugs found while converting real designs (EDIF, .DSN, PADS boards) and adds file and folder drag and drop to the GUI.
What's new
- Bug fix: KiCad 10.0 could not open the PCB made from EDIF input. When a portable nightly had been prepared in the GUI and the kicad-cli field pointed to it, the board was imported with the nightly too and the
.kicad_pcbbecame(version 20260831)("upgrade KiCad to version 10.99" error). Boards are now imported with stable kicad-cli regardless of the input type. - Bug fix: some nets were broken in the schematic with EDIF input. Alias labels of nets with special characters in their names, such as
RTS#andDTR#, and aliases with a display name different from the net name (NET_NAME_OVERRIDE, for examplenRSTon netETH_NRST) could not be read, so labels were missing and nets were split. Both forms now become labels. - Bug fix:
.DSNconversion failed when the project name contained a dot (for exampleABC_1.3) ("kicad-cli import failed"). The cause was kicad-cli treating.3as an extension and saving under another name. - GUI drag and drop (Windows). Dropping several files or a folder from Explorer fills the matching fields by extension:
.EDFto EDIF,.DSNto .DSN,.kicad_proto KiCad project,.ascto netlist or board by its header, IPC-D-356 to netlist,.kicad_pcbto board. For a folder only the files directly inside are used (so a previous output folder is not picked up by mistake), and EDIF mode is chosen when both EDIF and.DSNare present.
Download
- Windows 64-bit executables:
orcad2kicad-1.0.3-win64.zip(GUIorcad2kicad.exe+ CLI/MCPorcad2kicad-cli.exe) - From source (Windows/Linux/macOS):
git clone, then see README.en.md
Integrity check (SHA-256)
SHA256(orcad2kicad-1.0.3-win64.zip) = f1542edd6118d8583e7b0d0427e68056321a43757d6f11823cd79097af9feeed
PowerShell: Get-FileHash orcad2kicad-1.0.3-win64.zip -Algorithm SHA256
Requirements
Windows exe, or Python 3.10+ from source (Windows/Linux/macOS). Normal use needs stable KiCad 10.0.
Reading a .DSN without OrCAD needs a KiCad nightly, which the "prepare portable nightly" feature sets up without installing anything.
See README.en.md, docs/Quick_Start.en.md and docs/User_Manual.en.md for usage.
orcad2kicad 1.0.3
OrCAD 회로도(EDIF/.DSN)를 KiCad 10.0 프로젝트로 변환하고 기준 넷리스트로 검증하는 오픈소스 도구(MIT)의
유지보수 릴리스입니다. 실제 설계(EDIF·.DSN·PADS 보드)를 변환하면서 드러난 버그 3건을 고쳤고, GUI 에
파일·폴더 끌어다 놓기를 넣었습니다.
무엇이 새로운가
- 버그 수정 — EDIF 입력에서 만든 PCB 를 KiCad 10.0 이 열지 못하던 문제. GUI 에서 나이틀리 포터블을
준비해 kicad-cli 칸이 나이틀리일 때 보드까지 나이틀리로 임포트되어.kicad_pcb가(version 20260831)
이 되었습니다("upgrade KiCad to version 10.99" 오류). 이제 입력 종류와 관계없이 보드는 정식 kicad-cli 로
임포트합니다. - 버그 수정 — EDIF 입력에서 일부 넷이 회로도에서 끊기던 문제.
RTS#·DTR#처럼 이름에 특수 문자가
있는 넷의 별칭 라벨과, 넷 이름과 다른 표시 이름의 별칭(NET_NAME_OVERRIDE, 예: 넷ETH_NRST의nRST)을
읽지 못해 라벨이 빠지고 넷이 갈라졌습니다. 두 형식 모두 라벨로 옮깁니다. - 버그 수정 — 프로젝트 이름에 점이 있으면(예:
ABC_1.3).DSN변환이 실패하던 문제
("kicad-cli import failed"). kicad-cli 가.3을 확장자로 잘라 다른 이름으로 저장하던 것이 원인입니다. - GUI 끌어다 놓기(Windows). 탐색기에서 파일 여러 개나 폴더를 창에 놓으면 확장자로 알맞은 칸에 자동으로
들어갑니다 —.EDF→EDIF,.DSN→.DSN,.kicad_pro→KiCad 프로젝트,.asc→머리글로 넷리스트/보드 구분,
IPC-D-356→넷리스트,.kicad_pcb→보드. 폴더는 바로 아래 파일만 보고(이전 출력 폴더를 잘못 집지 않게),
EDIF 와.DSN이 함께 있으면 EDIF 모드를 고릅니다.
다운로드
- Windows 64비트 실행 파일:
orcad2kicad-1.0.3-win64.zip(GUIorcad2kicad.exe+ CLI/MCPorcad2kicad-cli.exe) - 소스에서 실행(Windows/Linux/macOS):
git clone후 README.md 참조
무결성 확인 (SHA-256)
SHA256(orcad2kicad-1.0.3-win64.zip) = f1542edd6118d8583e7b0d0427e68056321a43757d6f11823cd79097af9feeed
PowerShell: Get-FileHash orcad2kicad-1.0.3-win64.zip -Algorithm SHA256
요구 사항
Windows exe 또는 Python 3.10+ (Windows/Linux/macOS, 소스에서 실행). 일반 사용에는 정식(stable) KiCad 10.0.
.DSN 을 OrCAD 없이 읽으려면 KiCad 나이틀리(도구 내 "나이틀리 포터블 준비" 기능으로 설치 없이 준비 가능).
자세한 사용법은 README.md 및 docs/Quick_Start.md, docs/사용자설명서.md 를 참조하십시오.
orcad2kicad 1.0.2: IPC-D-356 reference netlists, label alignment, result screen improvements / IPC-D-356 기준 넷리스트 지원, 라벨 정렬, 결과 화면 개선
orcad2kicad 1.0.2
한국어 설명은 아래에 있습니다.
Maintenance release of orcad2kicad, an open-source tool (MIT) that converts OrCAD schematics (EDIF/.DSN) into KiCad 10.0 projects and verifies them against a reference netlist. IPC-D-356 files are now accepted as the reference netlist, importer defect cleanup goes one step further, and result screen labels and alignment were adjusted.
What's new
- IPC-D-356 / IPC-D-356A reference netlists:
--netlist(CLI), the GUI netlist field and the MCPnetlistargument accept IPC-D-356 netlists exported from Cadence Allegro and other board tools (.ipc/.356/.d356, also detected from content) as well as PADS2000 ASCII.asc. The [3] netlist check works as before. (Measured on the public Raspberry Pi Compute Module IO Board V3 design: all 152 nets match) - More importer defect cleanup: net alias labels in the middle of wires are moved to free wire ends and rotated to follow KiCad conventions. Together with the hop gap merging from 1.0.1, ERC
unconnected_wire_endpointreaches 0 in measured projects. - "vs PADS" in the log, summary and verification tab became "vs reference netlist (format)", so it is also correct for an IPC-D-356 reference.
- Results tab: the summary uses the remaining space, the conclusion line stays visible, and ERC is summarized in one line when all items are informational.
- Manual: added a note to open results through
.kicad_pro(opening a sub-sheet file alone overlays the KiCad default drawing sheet). - Added screenshots to the README (Korean and English).
Download
- Windows 64-bit executables:
orcad2kicad-1.0.2-win64.zip(GUIorcad2kicad.exe+ CLI/MCPorcad2kicad-cli.exe) - From source (Windows/Linux/macOS):
git clone, then see README.en.md
Integrity check (SHA-256)
SHA256(orcad2kicad-1.0.2-win64.zip) = fe3e67164e52415bd6466980c5c32eb874bdf1958f07a747115bd43d36de55f1
PowerShell: Get-FileHash orcad2kicad-1.0.2-win64.zip -Algorithm SHA256
Requirements
- Windows 10/11 64-bit (exe). Running from source needs Python 3.10+ (standard library only).
- KiCad 10.0 (kicad-cli, for netlist verification, ERC and PDF). Direct
.DSNinput needs KiCad nightly 10.99+, which the GUI button "Prepare portable KiCad nightly (no install)" downloads and extracts.
orcad2kicad 1.0.2
OrCAD 회로도(EDIF/.DSN)를 KiCad 10.0 프로젝트로 변환하고 기준 넷리스트로 검증하는 오픈소스 도구(MIT)의
유지보수 릴리스입니다. 기준 넷리스트로 IPC-D-356 파일을 받을 수 있게 되었고, 임포터 결함 정리가 한 단계 더
들어갔으며, 결과 화면의 표기와 정렬을 손봤습니다.
무엇이 새로운가
- IPC-D-356 / IPC-D-356A 기준 넷리스트 지원 —
--netlist(CLI), GUI 넷리스트 칸, MCPnetlist인자에
PADS2000 ASCII.asc외에 Cadence Allegro 등 보드 툴이 내보낸 IPC-D-356 넷리스트(.ipc/.356/.d356,
내용으로도 자동 판별)를 줄 수 있습니다. [3] 넷리스트 검증이 그대로 동작합니다.
(실측: Raspberry Pi Compute Module IO Board V3 공개 설계 파일 — 152개 넷 전부 일치) - 임포터 결함 정리 추가 — 배선 중간에 놓인 넷 별칭 라벨을 배선의 자유단으로 옮기고 회전을 KiCad 관례에
맞춥니다. 1.0.1의 hop 갭 병합과 함께 쓰이면 실측 프로젝트에서 ERCunconnected_wire_endpoint가 0건이 됩니다. - 로그·요약·검증 탭의 "vs PADS" 표기를 "vs 기준 넷리스트(형식)"으로 바꿔 IPC-D-356 기준일 때도 정확히 표시합니다.
- 결과 탭: 요약 설명이 남는 공간을 다 쓰고 결론 줄이 항상 보이며, ERC가 전부 정보성이면 한 줄로 요약합니다.
- 설명서: 결과는
.kicad_pro로 열 것(하위 시트 파일을 단독으로 열면 KiCad 기본 도면 양식이 겹쳐 보임) 안내. - README(한/영)에 스크린샷을 추가했습니다.
다운로드
- Windows 64비트 실행 파일:
orcad2kicad-1.0.2-win64.zip(GUIorcad2kicad.exe+ CLI/MCPorcad2kicad-cli.exe) - 소스에서 실행(Windows/Linux/macOS):
git clone후 README.md 참조
무결성 확인 (SHA-256)
SHA256(orcad2kicad-1.0.2-win64.zip) = fe3e67164e52415bd6466980c5c32eb874bdf1958f07a747115bd43d36de55f1
PowerShell: Get-FileHash orcad2kicad-1.0.2-win64.zip -Algorithm SHA256
요구 사항
- Windows 10/11 64비트 (exe). 소스 실행은 Python 3.10+ (표준 라이브러리만 사용)
- KiCad 10.0 (kicad-cli, 넷리스트 검증·ERC·PDF).
.DSN직접 입력은 KiCad 나이틀리 10.99+ 필요 —
GUI의 "나이틀리 KiCad 포터블 준비(설치 없음)" 버튼으로 다운로드·압축 해제만 해서 쓸 수 있습니다.
전체 변경 내역: CHANGELOG.md
orcad2kicad 1.0.1: importer defect cleanup, re-conversion fix, GUI improvements / 임포터 결함 정리, 재변환 버그 수정, GUI 개선
orcad2kicad 1.0.1
한국어 설명은 아래에 있습니다.
Maintenance release of orcad2kicad, an open-source tool (MIT) that converts OrCAD schematics (EDIF/.DSN) into KiCad 10.0 projects and verifies them against a PADS netlist. It adds post-processing for defects left by the KiCad nightly OrCAD importer, GUI usability improvements, and a fix for converting again into the same folder.
What's new
- Importer defect post-processing (on by default,
--no-import-cleanupturns it off)- "Hop gaps", where wires were cut at each crossing and filled with graphic lines, are merged into a single wire (netlist identical before and after)
- Net alias labels in the middle of wires are moved to free wire ends and rotated to follow KiCad conventions. In measured projects ERC
unconnected_wire_endpointwent from 177 to 0 and from 84 to 0 - The overlap of the OrCAD title block and the KiCad default drawing sheet is resolved with a blank drawing sheet (
blank.kicad_wks)
- Bug fix: converting a
.DSNagain into the same output folder left the first page file of the previous run, so reconstruction to the stable format was skipped (the root stayed in nightly format and KiCad 10.0 could not open it) and the first page kept its old content - GUI: language default "Auto (system language)", per-type log line colors, tab highlighting and item counts, emphasized status text (shows "items to check" when there are any), a detail window in the board difference tab, a font and spacing theme, app and exe icons
- Removed the company contact line at the end of the result summary
Download
- Windows 64-bit executables:
orcad2kicad-1.0.1-win64.zip(GUIorcad2kicad.exe+ CLI/MCPorcad2kicad-cli.exe) - From source (Windows/Linux/macOS):
git clone, then see README.en.md
Integrity check (SHA-256)
SHA256(orcad2kicad-1.0.1-win64.zip) = 3cac2fcaa7ae1c26bfb49d32d28dc466f38619af1958b0fb0da0a3b1dd6e77bc
PowerShell: Get-FileHash orcad2kicad-1.0.1-win64.zip -Algorithm SHA256
Requirements
- Windows 10/11 64-bit (exe). Running from source needs Python 3.10+ (standard library only).
- KiCad 10.0 (kicad-cli, for netlist verification, ERC and PDF). Direct
.DSNinput needs KiCad nightly 10.99+, which the GUI button "Prepare portable KiCad nightly (no install)" downloads and extracts.
orcad2kicad 1.0.1
OrCAD 회로도(EDIF/.DSN)를 KiCad 10.0 프로젝트로 변환하고 PADS 넷리스트로 검증하는 오픈소스 도구(MIT)의
유지보수 릴리스입니다. KiCad 나이틀리 OrCAD 임포터가 남기는 결함을 정리하는 후처리와 GUI 사용성 개선,
같은 폴더에 다시 변환할 때의 버그 수정이 들어 있습니다.
무엇이 새로운가
- 임포터 결함 후처리(기본 켜짐,
--no-import-cleanup으로 끔)- 교차점마다 배선을 끊고 그래픽 선으로 메워 두던 "hop 갭"을 하나의 배선으로 병합 (넷리스트 전후 동일)
- 배선 중간에 놓인 넷 별칭 라벨을 배선의 자유단으로 옮기고 회전을 KiCad 관례에 맞춤
→ 실측 프로젝트에서 ERCunconnected_wire_endpoint가 177 → 0, 84 → 0 - OrCAD 타이틀블록과 KiCad 기본 도면 양식이 겹쳐 보이던 문제를 빈 도면 양식(
blank.kicad_wks)으로 해소
- 버그 수정: 같은 출력 폴더에
.DSN을 다시 변환하면 이전 실행의 첫 페이지 파일이 남아 정식 포맷
재구성이 건너뛰어지고(루트가 나이틀리 포맷으로 남아 KiCad 10.0이 열지 못함) 첫 페이지가 옛 내용으로
남던 문제 - GUI: 언어 "자동(시스템 언어)" 기본값, 로그 줄 종류별 색 구분, 탭 강조와 항목 개수, 상태 문구 강조
(확인할 항목이 있으면 "확인할 항목 있음"으로 정확히 표시), 보드 차이 탭의 상세 창, 글꼴·여백 테마,
앱/exe 아이콘 - 결과 요약 끝의 회사 문의 문구 제거
다운로드
- Windows 64비트 실행 파일:
orcad2kicad-1.0.1-win64.zip(GUIorcad2kicad.exe+ CLI/MCPorcad2kicad-cli.exe) - 소스에서 실행(Windows/Linux/macOS):
git clone후 README.md 참조
무결성 확인 (SHA-256)
SHA256(orcad2kicad-1.0.1-win64.zip) = 3cac2fcaa7ae1c26bfb49d32d28dc466f38619af1958b0fb0da0a3b1dd6e77bc
PowerShell: Get-FileHash orcad2kicad-1.0.1-win64.zip -Algorithm SHA256
요구 사항
- Windows 10/11 64비트 (exe). 소스 실행은 Python 3.10+ (표준 라이브러리만 사용)
- KiCad 10.0 (kicad-cli, 넷리스트 검증·ERC·PDF).
.DSN직접 입력은 KiCad 나이틀리 10.99+ 필요 —
GUI의 "나이틀리 KiCad 포터블 준비(설치 없음)" 버튼으로 다운로드·압축 해제만 해서 쓸 수 있습니다.
전체 변경 내역: CHANGELOG.md
orcad2kicad 1.0.0: first public release of the OrCAD to KiCad converter (open source, MIT) / OrCAD → KiCad 변환기 첫 공개
orcad2kicad 1.0.0
한국어 설명은 아래에 있습니다.
First public release of orcad2kicad, a tool that converts OrCAD schematics (.DSN or EDIF 2.0.0) into stable KiCad 10.0 projects and checks connectivity against the PADS netlist OrCAD exports. The source is available in this repository under the MIT license.
Main features
- Direct OrCAD
.DSNinput (no OrCAD installation needed; a portable KiCad nightly is downloaded and extracted) or EDIF 2.0.0 input - Output in stable KiCad 10.0 format (root sheet + one sub-sheet per page), ready to open and edit in stable KiCad
- REF.PIN verification against a PADS2000 netlist (EDIF: [1][2][3],
.DSN: [3]) and board net comparison [4] - PADS Layout ASCII board link: footprint library (
PADS.pretty) extraction, footprint fields filled in, ready for Update PCB from Schematic - Result summary (what each check means, whether each ERC type needs action, and a conclusion) in Korean and English
- GUI (Korean/English), CLI, MCP server for AI tools such as Claude Code, and optional AI suggestions that the user decides whether to apply
Download
- Windows 64-bit executables:
orcad2kicad-1.0.0-win64.zip(GUIorcad2kicad.exe+ CLI/MCPorcad2kicad-cli.exe) - From source (Windows/Linux/macOS):
git clone, then see README.en.md
Integrity check (SHA-256)
bc54e326c9990bd1d24bfd7d3b59812522174348b4e474b52d5295d46431d091 orcad2kicad-1.0.0-win64.zip
PowerShell: Get-FileHash orcad2kicad-1.0.0-win64.zip -Algorithm SHA256
Requirements
- Stable KiCad 10.0 (including kicad-cli). KiCad nightly is needed only to read
.DSNfiles, and the tool prepares it as a portable copy without running an installer.
Documents
Made by Nerdvana Inc.: https://www.nerdvana.co.kr/en/orcad2kicad/
orcad2kicad 1.0.0 — OrCAD → KiCad 변환기 첫 공개 (오픈소스, MIT)
OrCAD 회로도(.DSN 또는 EDIF 2.0.0)를 정식 KiCad 10.0 프로젝트로 변환하고, OrCAD가 내보낸 PADS 넷리스트와 대조해 연결이 같은지 자동 검증하는 도구의 첫 공개 릴리스입니다. 소스는 이 저장소(MIT)에서 바로 클론할 수 있습니다.
First public release of an OrCAD to KiCad schematic converter with PADS netlist verification. Source in this repository (MIT). English README: README.en.md.
주요 기능
- OrCAD
.DSN직접 입력(OrCAD 설치 불필요, 포터블 KiCad 나이틀리를 내려받아 압축만 풂) 또는 EDIF 2.0.0 입력 - 결과는 정식 KiCad 10.0 포맷(루트 시트 + 페이지별 하위 시트) — 설치된 정식 KiCad로 바로 열고 편집
- PADS2000 넷리스트와 REF.PIN 단위 대조 검증(EDIF: [1][2][3],
.DSN: [3]), 보드 넷 대조 [4] - PADS Layout ASCII 보드 연동: 풋프린트 라이브러리(
PADS.pretty) 추출, 풋프린트 필드 채움, Update PCB from Schematic 준비 - 결과 요약 설명(각 검증의 의미, ERC 유형별 조치 필요 여부, 결론) — 한국어/영어
- GUI(한국어/English 전환), CLI, MCP 서버(Claude Code 등 AI 도구 연동), 선택적 AI 제안(적용은 사용자가)
다운로드
- Windows 64비트 실행 파일:
orcad2kicad-1.0.0-win64.zip(GUIorcad2kicad.exe, CLI/MCPorcad2kicad-cli.exe, 문서 포함). 설치 없음. - 소스에서 실행(Windows/Linux/macOS, Python 3.10+ 표준 라이브러리만):
git clone https://github.com/nerdvanainc/orcad2kicad.git후PYTHONPATH=src python -m orcad2kicad
요구 사항
- 정식 KiCad 10.0(kicad-cli 포함).
.DSN을 읽을 때만 KiCad 나이틀리가 필요하며 도구가 포터블로 준비합니다(설치 프로그램은 실행하지 않음).
무결성 확인 (SHA-256)
bc54e326c9990bd1d24bfd7d3b59812522174348b4e474b52d5295d46431d091 orcad2kicad-1.0.0-win64.zip
PowerShell: Get-FileHash orcad2kicad-1.0.0-win64.zip -Algorithm SHA256
문서
개발/제작: Nerdvana Inc. — https://www.nerdvana.co.kr/orcad2kicad/