Repository navigation
orcad2kicad 1.0.2: IPC-D-356 reference netlists, label alignment, result screen improvements / IPC-D-356 기준 넷리스트 지원, 라벨 정렬, 결과 화면 개선
orcad2kicad 1.0.2
한국어 설명은 아래에 있습니다.
Maintenance release of orcad2kicad, an open-source tool (MIT) that converts OrCAD schematics (EDIF/.DSN) into KiCad 10.0 projects and verifies them against a reference netlist. IPC-D-356 files are now accepted as the reference netlist, importer defect cleanup goes one step further, and result screen labels and alignment were adjusted.
What's new
- IPC-D-356 / IPC-D-356A reference netlists:
--netlist(CLI), the GUI netlist field and the MCPnetlistargument accept IPC-D-356 netlists exported from Cadence Allegro and other board tools (.ipc/.356/.d356, also detected from content) as well as PADS2000 ASCII.asc. The [3] netlist check works as before. (Measured on the public Raspberry Pi Compute Module IO Board V3 design: all 152 nets match) - More importer defect cleanup: net alias labels in the middle of wires are moved to free wire ends and rotated to follow KiCad conventions. Together with the hop gap merging from 1.0.1, ERC
unconnected_wire_endpointreaches 0 in measured projects. - "vs PADS" in the log, summary and verification tab became "vs reference netlist (format)", so it is also correct for an IPC-D-356 reference.
- Results tab: the summary uses the remaining space, the conclusion line stays visible, and ERC is summarized in one line when all items are informational.
- Manual: added a note to open results through
.kicad_pro(opening a sub-sheet file alone overlays the KiCad default drawing sheet). - Added screenshots to the README (Korean and English).
Download
- Windows 64-bit executables:
orcad2kicad-1.0.2-win64.zip(GUIorcad2kicad.exe+ CLI/MCPorcad2kicad-cli.exe) - From source (Windows/Linux/macOS):
git clone, then see README.en.md
Integrity check (SHA-256)
SHA256(orcad2kicad-1.0.2-win64.zip) = fe3e67164e52415bd6466980c5c32eb874bdf1958f07a747115bd43d36de55f1
PowerShell: Get-FileHash orcad2kicad-1.0.2-win64.zip -Algorithm SHA256
Requirements
- Windows 10/11 64-bit (exe). Running from source needs Python 3.10+ (standard library only).
- KiCad 10.0 (kicad-cli, for netlist verification, ERC and PDF). Direct
.DSNinput needs KiCad nightly 10.99+, which the GUI button "Prepare portable KiCad nightly (no install)" downloads and extracts.
orcad2kicad 1.0.2
OrCAD 회로도(EDIF/.DSN)를 KiCad 10.0 프로젝트로 변환하고 기준 넷리스트로 검증하는 오픈소스 도구(MIT)의
유지보수 릴리스입니다. 기준 넷리스트로 IPC-D-356 파일을 받을 수 있게 되었고, 임포터 결함 정리가 한 단계 더
들어갔으며, 결과 화면의 표기와 정렬을 손봤습니다.
무엇이 새로운가
- IPC-D-356 / IPC-D-356A 기준 넷리스트 지원 —
--netlist(CLI), GUI 넷리스트 칸, MCPnetlist인자에
PADS2000 ASCII.asc외에 Cadence Allegro 등 보드 툴이 내보낸 IPC-D-356 넷리스트(.ipc/.356/.d356,
내용으로도 자동 판별)를 줄 수 있습니다. [3] 넷리스트 검증이 그대로 동작합니다.
(실측: Raspberry Pi Compute Module IO Board V3 공개 설계 파일 — 152개 넷 전부 일치) - 임포터 결함 정리 추가 — 배선 중간에 놓인 넷 별칭 라벨을 배선의 자유단으로 옮기고 회전을 KiCad 관례에
맞춥니다. 1.0.1의 hop 갭 병합과 함께 쓰이면 실측 프로젝트에서 ERCunconnected_wire_endpoint가 0건이 됩니다. - 로그·요약·검증 탭의 "vs PADS" 표기를 "vs 기준 넷리스트(형식)"으로 바꿔 IPC-D-356 기준일 때도 정확히 표시합니다.
- 결과 탭: 요약 설명이 남는 공간을 다 쓰고 결론 줄이 항상 보이며, ERC가 전부 정보성이면 한 줄로 요약합니다.
- 설명서: 결과는
.kicad_pro로 열 것(하위 시트 파일을 단독으로 열면 KiCad 기본 도면 양식이 겹쳐 보임) 안내. - README(한/영)에 스크린샷을 추가했습니다.
다운로드
- Windows 64비트 실행 파일:
orcad2kicad-1.0.2-win64.zip(GUIorcad2kicad.exe+ CLI/MCPorcad2kicad-cli.exe) - 소스에서 실행(Windows/Linux/macOS):
git clone후 README.md 참조
무결성 확인 (SHA-256)
SHA256(orcad2kicad-1.0.2-win64.zip) = fe3e67164e52415bd6466980c5c32eb874bdf1958f07a747115bd43d36de55f1
PowerShell: Get-FileHash orcad2kicad-1.0.2-win64.zip -Algorithm SHA256
요구 사항
- Windows 10/11 64비트 (exe). 소스 실행은 Python 3.10+ (표준 라이브러리만 사용)
- KiCad 10.0 (kicad-cli, 넷리스트 검증·ERC·PDF).
.DSN직접 입력은 KiCad 나이틀리 10.99+ 필요 —
GUI의 "나이틀리 KiCad 포터블 준비(설치 없음)" 버튼으로 다운로드·압축 해제만 해서 쓸 수 있습니다.
전체 변경 내역: CHANGELOG.md