Repository navigation
orcad2kicad 1.0.7: bottom-only pads, PADS unit fixes / 바닥층 패드 복원, PADS 단위 수정
orcad2kicad 1.0.7
한국어 설명은 아래에 있습니다.
Fix release of orcad2kicad, an open-source tool (MIT) that converts OrCAD schematics (EDIF/.DSN) into KiCad 10.0 projects and verifies the result.
What's new
- Bottom-only pads restored. SMD pads whose PADS pad stack has top size 0 and bottom size above 0 (for example hot-swap sockets soldered on the back) were imported as 0.001 mm pads on the part side. They now get their real layer and size. On two measured boards, DRC unconnected items went from 5 to 0 and from 2 to 0.
--keep-board-padsturns this off. - PADS unit fixes.
INCHESfiles are now recognized, which removes a 76.2 mm mask clearance left by the importer. The CAM pad oversize advice for METRIC files is fixed. Decal values use the decal's own unit in files other than BASIC. - Clear message for
.pcbboards. Giving a PADS binary.pcbto--boardused to end with an exception. It now ends with a message to export ASCII in PADS.
Download
- Windows 64-bit executables:
orcad2kicad-1.0.7-win64.zip(GUIorcad2kicad.exe+ CLI/MCPorcad2kicad-cli.exe) - From source (Windows/Linux/macOS):
git clone, then see README.en.md
Integrity check (SHA-256)
SHA256(orcad2kicad-1.0.7-win64.zip) = d7a5cca309d887a369f400a1c71045165b9a5ccc035675b9b0e3b895a3833bcc
PowerShell: Get-FileHash orcad2kicad-1.0.7-win64.zip -Algorithm SHA256
Requirements
Windows exe, or Python 3.10+ from source (Windows/Linux/macOS). Normal use needs stable KiCad 10.0.
Reading a .DSN without OrCAD needs a KiCad nightly, which the "prepare portable nightly" feature sets up without installing anything.
See README.en.md, docs/Quick_Start.en.md and docs/User_Manual.en.md for usage.
orcad2kicad 1.0.7
OrCAD 회로도(EDIF/.DSN)를 KiCad 10.0 프로젝트로 변환하고 결과를 검증하는 오픈소스 도구(MIT)의 수정 릴리스입니다.
무엇이 새로운가
- 바닥층 전용 패드 복원. PADS 패드 스택이 윗면 크기 0, 바닥면 크기 0 초과인 SMD 패드(뒷면에 납땜하는 핫스왑 소켓 등)가 부품 면의 0.001 mm 패드로 임포트되던 것을 실제 면과 크기로 되돌립니다. 실측 보드 2개의 DRC 미연결이 5건에서 0건, 2건에서 0건이 됐습니다.
--keep-board-pads로 끌 수 있습니다. - PADS 단위 처리 수정.
INCHES파일을 인식해 임포터가 남기던 76.2 mm 마스크 여유값을 없앴습니다. METRIC 파일의 CAM 패드 오버사이즈 안내값을 고쳤습니다. BASIC이 아닌 파일에서 디칼 값은 디칼 자기 단위로 읽습니다. .pcb보드 안내.--board에 PADS 바이너리.pcb를 주면 예외로 끝나던 것을, PADS에서 ASCII로 내보내라는 안내로 끝나게 했습니다.
다운로드
- Windows 64비트 실행 파일:
orcad2kicad-1.0.7-win64.zip(GUIorcad2kicad.exe+ CLI/MCPorcad2kicad-cli.exe) - 소스에서 실행(Windows/Linux/macOS):
git clone후 README.md 참조
무결성 확인 (SHA-256)
SHA256(orcad2kicad-1.0.7-win64.zip) = d7a5cca309d887a369f400a1c71045165b9a5ccc035675b9b0e3b895a3833bcc
PowerShell: Get-FileHash orcad2kicad-1.0.7-win64.zip -Algorithm SHA256
요구 사항
Windows exe 또는 Python 3.10+(소스 실행, Windows/Linux/macOS). 일반 사용에는 정식 KiCad 10.0이 필요합니다.
.DSN을 OrCAD 없이 읽으려면 KiCad 나이틀리가 필요하고, "나이틀리 포터블 준비" 기능으로 설치 없이 준비할 수 있습니다.
자세한 사용법은 README.md, docs/Quick_Start.md, docs/사용자설명서.md를 참조하십시오.