Repository navigation
jPlug Analysis
Nipun Batra edited this page Jul 11, 2013
·
10 revisions
| jPlug Mac | Appliance | Floor |
|---|---|---|
| C4A0/C49D* | Kitchen Misc | Ground |
| C49D/C4A0* | Refrigerator | Ground |
| C49F | AC-2 | First floor small room |
| 7A1C | AC-1 | First floor big room |
| C4A1 | Geyser | First floor |
| C4AD | Washing Machine | First floor |
| 7A1D | TV | Ground |
| 7A18 | Laptop | First |
| C49C | Iron | First |
- Before/After
Analysis done for data collected on 4th July. Active power is shown for all the cases.
Remaining jPlugs did not give any data on this day.
Noteworthy:
-
Meter 1 is only showing load for 1 AC
-
Ref. is not showing any duty cycle. It seems to be always ON. I remember in the past seeing its duty cycle. Maybe due to summers, or after repairs, something has happened. I remember even Pushpendra's ref. behaved like this. Here is a plot of refrigerator active power before we had it repaired.
- AC's should not be a problem. But disaggregating remaining stuff seems really hard.
Comments from Amarjeet:
- You should fill up missing readings with zero (for the times jPlug is off). At first glance, it looked like the AC in bigger room was ON all day but later I realized that inbetween readings were missing.
- I have also observed my refrigerator to be ON most of the times - take a look at our power consumption in the night to verify.
- Can you also note down the appliance settings (AC temperature, Refrigerator internal temperature setting) and appliance meta data (their model number etc.)









