Repository navigation
HzUnlock 1.1.0
HzUnlock 1.1.0
A big reliability update. It fixes DeX restarting over and over and a black monitor at very high rates, and makes unplugging safer after reports of phones freezing. It also adds more slider rates, clearer help when the connection is the limit, a Diagnostics report, and an update check.
Fixed
- Safer unplugging and reconnecting. Two Galaxy S25 owners had the phone freeze on a black screen after unplugging the monitor, following a Reconnect Monitor that didn't help. HzUnlock moves app timing to the monitor, and it now never leaves it there while the monitor might disappear: timing moves back to the phone screen before a reconnect starts and stays there until DeX has settled, and a newly connected monitor gets a few seconds to settle first. On a 60 Hz connection, where moving timing to the monitor gains nothing, HzUnlock leaves it with Android entirely. If your phone still freezes on unplug, please send a Diagnostics report.
- Turning off High Refresh now fully undoes it. It also switches DeX back to its standard modes, so the monitor reconnects at its usual rate. Before, DeX kept the faster modes HzUnlock had switched on. Some phones list modes they can't drive (a 288 Hz monitor on a Galaxy S25 stayed black), and turning HzUnlock off now brings the picture back.
- DeX no longer restarts in a loop. Some monitors connect below their fastest mode because the hub or cable can't carry it, for example a 165 Hz monitor that comes up at 144 Hz. With Fix Slow Connections on, HzUnlock reconnected that monitor every 90 seconds, and each reconnect restarted DeX. Now it tries once per plug-in. If the monitor comes back at the same rate, HzUnlock stops and tells you the connection tops out there. Unplugging the monitor allows one new try, and automatic reconnects never happen more than once every 10 minutes.
- Nothing reconnects the monitor when Fix Slow Connections is off. Reconnect Monitor only runs when you tap it.
- A reconnect can't leave DeX's high-refresh modes switched off if something fails halfway.
- After the monitor drops out and comes back, HzUnlock moves app timing back to it instead of assuming it's still there.
- If anything else changes where app timing comes from, for example DeX or another tool, HzUnlock notices within a few seconds and puts it back.
- Reconnect Monitor only works while High Refresh is on. A reconnect switches DeX's faster modes back on, which shouldn't happen while HzUnlock is off.
Improved
- The slider only offers rates your connection really runs at. A monitor that lists 165 Hz but connected at 144 Hz now shows 144 Hz as the top stop.
- More slider rates. The slider used to offer only phone rates that divide the monitor's rate evenly, so a 288 Hz monitor got 288, 48 and 24, and a 144 Hz one got 144, 48 and 24. It now offers all of the phone screen's rates below the monitor's (120, 80, 60, 48, 30 and 24 on most recent Galaxy phones). When a rate doesn't divide the monitor's evenly, motion is slightly less even, like 60 fps video on a 144 Hz screen, and the app says so.
- Connection hints. HzUnlock tells you when:
- the monitor reaches a faster rate at a lower resolution ("Your monitor can do 144 Hz at 1920 × 1080. Lower DeX's screen resolution to use it.")
- the monitor only offers 60 Hz over the current hub or cable, which the phone can't change
- the connection stays below the monitor's fastest mode after reconnecting. Often the phone simply uses the monitor's default mode, so check the monitor's own menu for a high refresh or DisplayPort 1.4 setting
- Compatibility explains when your One UI version doesn't have Samsung's call for moving app timing to the monitor. In that case apps top out at the phone screen's rate.
- Copy Report now includes your settings, the monitor's rates at the current resolution, and its fastest rate at every resolution, so connection limits are easier to spot.
New
-
Diagnostics (under Compatibility, and behind Report an Issue). It's one report you can read before you share it:
- the compatibility summary
- a timestamped log of what the session did: monitors connecting and disconnecting, reconnects and their results, rate changes, heat, and errors. The log is kept on the phone, so if it freezes and has to be restarted, the next report still shows what happened before
- any saved crash of the app or its display service
- optionally, the display, DeX and crash lines from Android's log, with e-mail addresses and long IDs masked
Copy it, share it, or open a GitHub issue that's already filled in. If HzUnlock crashed, it offers the report the next time you open it.
-
Update check. Once a day HzUnlock asks GitHub whether a major new version is out, then offers Download, Later, or Skip This Version. Small updates don't pop up. Check for Updates under About checks right away and shows every newer version.
Privacy
This version adds the Internet permission, used only for the update check. It's one request a day to GitHub for HzUnlock's list of releases, and nothing about your phone, monitor, or usage is sent. Turn off Check for Updates in Settings and HzUnlock makes no network requests unless you tap Check for Updates under About. Diagnostics reports never leave the phone unless you copy or share them.
Install it over 1.0.1. Your settings and Shizuku permission carry over.
Verify the download
SHA-256: e4f38fddce5be21ac2b83a157c482d9a615afb7ae6af14fc089f1928a5b98cf7
Signing certificate SHA-256: 64:D9:BC:A9:00:2D:AD:F9:3A:6F:D8:6F:0D:09:95:DC:61:45:E2:7C:4E:82:D7:ED:02:CD:C6:D2:4E:AA:21:7A