Repository navigation
Releases
HzUnlock 1.2.0
HzUnlock 1.2.0
The biggest update yet: Monitor Mode now works without root on Snapdragon Galaxy phones. A monitor or TV that always connects at 60 Hz, even though it can do 120 or 144 Hz, can now be started at its faster mode with one tap. High Refresh also turns on by itself after setup, and bug reports are much easier to send.
New
- Monitor Mode without root (Snapdragon phones). Every monitor starts in its own default mode when it connects, and many default to 60 Hz even when they list 120 or 144 Hz. Reconnecting doesn't change that, and neither does DeX's resolution setting, which only rescales the desktop. HzUnlock now sets the mode you choose at the moment the monitor connects, so the phone treats it as the monitor's own mode and apps run at its full rate.
- One tap. When the monitor started at 60 Hz but lists something faster, the Monitor Mode card offers Start at 144 Hz (or whatever your monitor's fastest is at its resolution). A TV stuck at 4K 60 gets its largest 120 Hz mode, for example 1440p 120.
- Other Modes lists the rest, grouped by resolution, fastest first. Modes that don't help in DeX (60 Hz and below, tiny resolutions) are left out.
- Always safe to try. The monitor goes dark for a few seconds while it switches. Then tap Keep. If you don't within 20 seconds, for example because the screen stayed black, HzUnlock undoes it: High Refresh turns off and DeX goes back to its standard modes. A mode that didn't work isn't suggested again right away.
- Remembered. A kept mode is set again every time that monitor connects, until you tap Use Default.
- If the monitor doesn't reconnect by itself, the app asks you to unplug it and plug it back in.
- Exynos phones (S24 FE, S21 FE and others) don't have the Qualcomm service this needs, so Monitor Mode stays hidden there.
- Help for 288 Hz connections. A 288 Hz mode can be right at the edge of what the phone's connection carries. If such a connection drops within seconds, HzUnlock starts the monitor at half the rate (144 Hz) on the next connection and asks you to keep it. While 288 Hz works, the Monitor Mode card offers 144 Hz as a one-tap fallback.
Improved
- High Refresh is on by default. After you allow Shizuku the first time, High Refresh turns on by itself. Turning it off is remembered, and off still fully undoes everything.
- The slider is dimmed while High Refresh is off, with the line "Turn on High Refresh to set the rate." Before, it moved but did nothing.
- Report an Issue saves the whole report as a file in Downloads and opens a short, prefilled GitHub issue to attach it to. Before, the link carried the report itself, and GitHub could answer with "Internal server error".
- Diagnostics reports are much more useful. The Android log section drops the flood of launcher, brightness, window and layer lines that used to fill it within seconds. It now goes back several minutes for the lines that matter: monitor connects and disconnects, modes, timing changes and crashes.
- Clearer connection advice. When the monitor lists a faster mode than it connected in, the app points to Monitor Mode instead of a Reconnect button that couldn't help. The slider and Monitor Mode are labelled separately: the slider sets how fast apps draw, and Monitor Mode sets the monitor's own mode.
- If a monitor drops out right after it takes over app timing, the phone screen paces apps for a moment, then gives timing back to the monitor once the connection holds. Only repeated drops keep apps on the phone screen.
Fixed
- "Display update failed: NullPointerException" when a monitor connects. It was harmless, and now it's gone.
- DeX drops and re-adds the monitor about 8 seconds after a reconnect. HzUnlock now waits for it to come back instead of treating it as a failure.
- A monitor kept in a chosen mode is no longer reported as a limited connection.
Privacy
No new permissions. Monitor Mode uses the same Shizuku access as before. Reports stay on the phone (in Downloads, if you save one) until you share or attach them yourself.
Install it over 1.1.0. Your settings and Shizuku permission carry over.
Tested on a Galaxy S24 Ultra with an Odyssey G40B (1080p, 240/120/60 Hz). Other phones, 60 Hz-default monitors, TVs and 288 Hz monitors haven't been tested yet. If Monitor Mode doesn't work for you, please tap Report an Issue and attach the saved file.
Verify the download
SHA-256: 412dc57dcb61e09d52b82b975cf6ce82bea7f723fb0510e3f76b1e0d307c8b42
Signing certificate SHA-256: 64:D9:BC:A9:00:2D:AD:F9:3A:6F:D8:6F:0D:09:95:DC:61:45:E2:7C:4E:82:D7:ED:02:CD:C6:D2:4E:AA:21:7A
HzUnlock 1.1.0
HzUnlock 1.1.0
A big reliability update. It fixes DeX restarting over and over and a black monitor at very high rates, and makes unplugging safer after reports of phones freezing. It also adds more slider rates, clearer help when the connection is the limit, a Diagnostics report, and an update check.
Fixed
- Safer unplugging and reconnecting. Two Galaxy S25 owners had the phone freeze on a black screen after unplugging the monitor, following a Reconnect Monitor that didn't help. HzUnlock moves app timing to the monitor, and it now never leaves it there while the monitor might disappear: timing moves back to the phone screen before a reconnect starts and stays there until DeX has settled, and a newly connected monitor gets a few seconds to settle first. On a 60 Hz connection, where moving timing to the monitor gains nothing, HzUnlock leaves it with Android entirely. If your phone still freezes on unplug, please send a Diagnostics report.
- Turning off High Refresh now fully undoes it. It also switches DeX back to its standard modes, so the monitor reconnects at its usual rate. Before, DeX kept the faster modes HzUnlock had switched on. Some phones list modes they can't drive (a 288 Hz monitor on a Galaxy S25 stayed black), and turning HzUnlock off now brings the picture back.
- DeX no longer restarts in a loop. Some monitors connect below their fastest mode because the hub or cable can't carry it, for example a 165 Hz monitor that comes up at 144 Hz. With Fix Slow Connections on, HzUnlock reconnected that monitor every 90 seconds, and each reconnect restarted DeX. Now it tries once per plug-in. If the monitor comes back at the same rate, HzUnlock stops and tells you the connection tops out there. Unplugging the monitor allows one new try, and automatic reconnects never happen more than once every 10 minutes.
- Nothing reconnects the monitor when Fix Slow Connections is off. Reconnect Monitor only runs when you tap it.
- A reconnect can't leave DeX's high-refresh modes switched off if something fails halfway.
- After the monitor drops out and comes back, HzUnlock moves app timing back to it instead of assuming it's still there.
- If anything else changes where app timing comes from, for example DeX or another tool, HzUnlock notices within a few seconds and puts it back.
- Reconnect Monitor only works while High Refresh is on. A reconnect switches DeX's faster modes back on, which shouldn't happen while HzUnlock is off.
Improved
- The slider only offers rates your connection really runs at. A monitor that lists 165 Hz but connected at 144 Hz now shows 144 Hz as the top stop.
- More slider rates. The slider used to offer only phone rates that divide the monitor's rate evenly, so a 288 Hz monitor got 288, 48 and 24, and a 144 Hz one got 144, 48 and 24. It now offers all of the phone screen's rates below the monitor's (120, 80, 60, 48, 30 and 24 on most recent Galaxy phones). When a rate doesn't divide the monitor's evenly, motion is slightly less even, like 60 fps video on a 144 Hz screen, and the app says so.
- Connection hints. HzUnlock tells you when:
- the monitor reaches a faster rate at a lower resolution ("Your monitor can do 144 Hz at 1920 × 1080. Lower DeX's screen resolution to use it.")
- the monitor only offers 60 Hz over the current hub or cable, which the phone can't change
- the connection stays below the monitor's fastest mode after reconnecting. Often the phone simply uses the monitor's default mode, so check the monitor's own menu for a high refresh or DisplayPort 1.4 setting
- Compatibility explains when your One UI version doesn't have Samsung's call for moving app timing to the monitor. In that case apps top out at the phone screen's rate.
- Copy Report now includes your settings, the monitor's rates at the current resolution, and its fastest rate at every resolution, so connection limits are easier to spot.
New
-
Diagnostics (under Compatibility, and behind Report an Issue). It's one report you can read before you share it:
- the compatibility summary
- a timestamped log of what the session did: monitors connecting and disconnecting, reconnects and their results, rate changes, heat, and errors. The log is kept on the phone, so if it freezes and has to be restarted, the next report still shows what happened before
- any saved crash of the app or its display service
- optionally, the display, DeX and crash lines from Android's log, with e-mail addresses and long IDs masked
Copy it, share it, or open a GitHub issue that's already filled in. If HzUnlock crashed, it offers the report the next time you open it.
-
Update check. Once a day HzUnlock asks GitHub whether a major new version is out, then offers Download, Later, or Skip This Version. Small updates don't pop up. Check for Updates under About checks right away and shows every newer version.
Privacy
This version adds the Internet permission, used only for the update check. It's one request a day to GitHub for HzUnlock's list of releases, and nothing about your phone, monitor, or usage is sent. Turn off Check for Updates in Settings and HzUnlock makes no network requests unless you tap Check for Updates under About. Diagnostics reports never leave the phone unless you copy or share them.
Install it over 1.0.1. Your settings and Shizuku permission carry over.
Verify the download
SHA-256: e4f38fddce5be21ac2b83a157c482d9a615afb7ae6af14fc089f1928a5b98cf7
Signing certificate SHA-256: 64:D9:BC:A9:00:2D:AD:F9:3A:6F:D8:6F:0D:09:95:DC:61:45:E2:7C:4E:82:D7:ED:02:CD:C6:D2:4E:AA:21:7A
HzUnlock 1.0.1
HzUnlock 1.0.1
A small update to 1.0.0.
- Added a by npfp222 credit with a GitHub link next to the HzUnlock title.
- Added Report an Issue under About. It opens a GitHub issue with your compatibility report already filled in.
Install it over 1.0.0. Your settings and Shizuku permission carry over.
Verify the download
SHA-256: 88191f2dded3081257c59efa1fd3be70c89a13654bb0a2d9084c25eace68104a
Signing certificate SHA-256: 64:D9:BC:A9:00:2D:AD:F9:3A:6F:D8:6F:0D:09:95:DC:61:45:E2:7C:4E:82:D7:ED:02:CD:C6:D2:4E:AA:21:7A
HzUnlock 1.0.0
HzUnlock 1.0.0
The first public release. HzUnlock unlocks your monitor's full refresh rate in wired Samsung DeX. DeX normally keeps apps at 60 Hz; HzUnlock lets them run at up to the monitor's own rate, or any lower smooth rate you pick. It runs through Shizuku (Wireless debugging), and root is optional.
Install
- Download
HzUnlock-1.0.0.apkbelow and install it. - Install Shizuku and start it with Wireless debugging.
- Open HzUnlock, tap Allow in the Shizuku prompt, connect your monitor, and turn on High Refresh.
Highlights
- One switch and one slider. The slider only offers rates the system really runs at and that stay smooth on your monitor.
- No cap. The top rate is whatever your monitor connects at.
- Quick Settings tile and a launcher shortcut to toggle it.
- Restore Automatically after Shizuku restarts, plus optional Cool Down When Hot and Fix Slow Connections.
- Compatibility page with a Copy Report button. Please include the report when opening an issue.
Compatibility
Verified on a Galaxy S24 Ultra (SM-S928U, Android 17 / One UI 9) with an Odyssey G40B at 1080p/240 Hz over a USB-C DisplayPort hub. Other Samsung phones and tablets should work at the level the app reports, but haven't been tested yet. Reports are very welcome.
Verify the download
SHA-256: see HzUnlock-1.0.0.apk.sha256.
Signing certificate SHA-256: 64:D9:BC:A9:00:2D:AD:F9:3A:6F:D8:6F:0D:09:95:DC:61:45:E2:7C:4E:82:D7:ED:02:CD:C6:D2:4E:AA:21:7A
HzUnlock isn't affiliated with Samsung. It changes runtime display settings only; turning it off, stopping Shizuku, or rebooting restores Android's defaults.