Repository navigation
HzUnlock 1.2.0
The biggest update yet: Monitor Mode now works without root on Snapdragon Galaxy phones. A monitor or TV that always connects at 60 Hz, even though it can do 120 or 144 Hz, can now be started at its faster mode with one tap. High Refresh also turns on by itself after setup, and bug reports are much easier to send.
New
- Monitor Mode without root (Snapdragon phones). Every monitor starts in its own default mode when it connects, and many default to 60 Hz even when they list 120 or 144 Hz. Reconnecting doesn't change that, and neither does DeX's resolution setting, which only rescales the desktop. HzUnlock now sets the mode you choose at the moment the monitor connects, so the phone treats it as the monitor's own mode and apps run at its full rate.
- One tap. When the monitor started at 60 Hz but lists something faster, the Monitor Mode card offers Start at 144 Hz (or whatever your monitor's fastest is at its resolution). A TV stuck at 4K 60 gets its largest 120 Hz mode, for example 1440p 120.
- Other Modes lists the rest, grouped by resolution, fastest first. Modes that don't help in DeX (60 Hz and below, tiny resolutions) are left out.
- Always safe to try. The monitor goes dark for a few seconds while it switches. Then tap Keep. If you don't within 20 seconds, for example because the screen stayed black, HzUnlock undoes it: High Refresh turns off and DeX goes back to its standard modes. A mode that didn't work isn't suggested again right away.
- Remembered. A kept mode is set again every time that monitor connects, until you tap Use Default.
- If the monitor doesn't reconnect by itself, the app asks you to unplug it and plug it back in.
- Exynos phones (S24 FE, S21 FE and others) don't have the Qualcomm service this needs, so Monitor Mode stays hidden there.
- Help for 288 Hz connections. A 288 Hz mode can be right at the edge of what the phone's connection carries. If such a connection drops within seconds, HzUnlock starts the monitor at half the rate (144 Hz) on the next connection and asks you to keep it. While 288 Hz works, the Monitor Mode card offers 144 Hz as a one-tap fallback.
Improved
- High Refresh is on by default. After you allow Shizuku the first time, High Refresh turns on by itself. Turning it off is remembered, and off still fully undoes everything.
- The slider is dimmed while High Refresh is off, with the line "Turn on High Refresh to set the rate." Before, it moved but did nothing.
- Report an Issue saves the whole report as a file in Downloads and opens a short, prefilled GitHub issue to attach it to. Before, the link carried the report itself, and GitHub could answer with "Internal server error".
- Diagnostics reports are much more useful. The Android log section drops the flood of launcher, brightness, window and layer lines that used to fill it within seconds. It now goes back several minutes for the lines that matter: monitor connects and disconnects, modes, timing changes and crashes.
- Clearer connection advice. When the monitor lists a faster mode than it connected in, the app points to Monitor Mode instead of a Reconnect button that couldn't help. The slider and Monitor Mode are labelled separately: the slider sets how fast apps draw, and Monitor Mode sets the monitor's own mode.
- If a monitor drops out right after it takes over app timing, the phone screen paces apps for a moment, then gives timing back to the monitor once the connection holds. Only repeated drops keep apps on the phone screen.
Fixed
- "Display update failed: NullPointerException" when a monitor connects. It was harmless, and now it's gone.
- DeX drops and re-adds the monitor about 8 seconds after a reconnect. HzUnlock now waits for it to come back instead of treating it as a failure.
- A monitor kept in a chosen mode is no longer reported as a limited connection.
Privacy
No new permissions. Monitor Mode uses the same Shizuku access as before. Reports stay on the phone (in Downloads, if you save one) until you share or attach them yourself.
Install it over 1.1.0. Your settings and Shizuku permission carry over.
Tested on a Galaxy S24 Ultra with an Odyssey G40B (1080p, 240/120/60 Hz). Other phones, 60 Hz-default monitors, TVs and 288 Hz monitors haven't been tested yet. If Monitor Mode doesn't work for you, please tap Report an Issue and attach the saved file.
Verify the download
SHA-256: 412dc57dcb61e09d52b82b975cf6ce82bea7f723fb0510e3f76b1e0d307c8b42
Signing certificate SHA-256: 64:D9:BC:A9:00:2D:AD:F9:3A:6F:D8:6F:0D:09:95:DC:61:45:E2:7C:4E:82:D7:ED:02:CD:C6:D2:4E:AA:21:7A