Repository navigation
v6.0
What's New in v6.0
-
Adjustable PureSignal correction: PureSignal now has a "PS Correction" setting with three options ΓÇö Strict (default), Medium, and Relaxed. Strict corrects the most aggressively; Relaxed is gentler. If your signal looks over-corrected or calibration unstable, try a softer setting.
-
Cleaner PureSignal screen: Removed a set of advanced controls that never actually did anything, so the window is simpler and less confusing.
Pure signal operation
-
The preferred method of using pure single is the single cal mode but it does require recalibration whenever you have a large change in power level or change your select bands etc..
-
The Automatic mode while much more convenient is slow due to the fact that each reset of the attenuator restarts the pure signal control loop then it has to lock on again this is even more of an issue with the new wdsp 2.11 another important factor in this mode is you must have your audio chain gain set to where you regularly touch 0 on the alc meter not the (alc comp meter) as each time it hits 0 it triggers a calibration if it doesn't hit 0 it doesn't calibrate.
-
It does not have to pulse green continuously as once it flashes green its calibrated if your talking and it flashes green its calibrating again but it really does not have to calibrate continuously the whole time you are transmitting if it does great but its not necessary.
Installer
-
.msi- the SDR-VST3 product. It requires the .NET 10 Desktop
Runtime (x64) to be installed on the machine. The installer checks
for it and tells you where to get it if it is missing:
https://dotnet.microsoft.com/download/dotnet/10.0If you already have an older SDR-VST3 installed, installing over it
upgrades in place.