Skip to content

v6.3.2

Latest

Choose a tag to compare

@github-actions github-actions released this 17 Nov 02:54
· 2 commits to master since this release

What's new in v6.3.2

Fixed puresignal for the 8000 and 7000 series radios

What PureSignal does:
it listens to your own transmitter's output and automatically pre-distorts the signal so the radio transmits cleanly — less splatter, less interference on adjacent frequencies.

What was wrong:
to do that it needs a target level for the feedback signal it measures. Our build used a value of 22 for the ANAN 7000D, 8000D, G2, while every other radio used 152. That 22 came from a development branch, and it doesn't work: the feedback reading was wrong, so calibration never completed properly and the "Correcting" indication never appeared.

What we fixed:
the target is now 152 for every radio, which is the value current main-line Thetis uses (its internal reference is 152.293). No per-radio special cases are left. If you use PureSignal: switch to transmit, run Single Calibrate on each band as usual — this time it should settle and show Correcting, and the feedback level should read in a realistic range.

Added new Digi Id system (still a work in progress)

What it is:
a signal recognizer. It listens to the audio of whatever you're tuned to, measures the signal's characteristics (bandwidth, symbol rate, tone spacing, how often it repeats, modulation type), and compares that against a database of 500+ known digital signals. It then shows the most likely matches, best first, with a confidence score and the reasons for the match.

The database comes from the Artemis database project and includes a waterfall picture and a reference recording for each signal. It is not shipped with the installer — it's a ~288 MB download that the program fetches for you, because otherwise every installer would be that much bigger.

Where it lives: %APPDATA%\OpenHPSDR\SDR-VST3-x64\SigId (the HL2 build uses SDR-VST3-HL2-x64). after the database is installed the program measures every reference recording once to build its "reference data" — a few minutes of work that makes the matching much more accurate. The window tells you it's running and says "Reference data ready (N signals measured)" when it's done.

How to use it:

  1. Open the Digi Id window and click Install Database. Wait for the download (the progress bar and MB/s counter show it) and then the reference-data pass.
  2. Tick Enable identification, pick the receiver (RX1/RX2) and the scope (all signals, Amateur Radio, Hf Digital Modes Example: military digital).
  3. Tune to an unknown signal. The candidate list fills in, best match at the top; click a row to open its details.
  4. If the program says reference data is missing, press Rebuild reference data — it's the only maintenance step you'll ever need, and only after a database update.

Installer

  • .msi — the SDR-VST3 product. It requires the .NET 10 Desktop
    Runtime
    (x64) to be installed on the machine. The installer checks
    for it and tells you where to get it if it is missing:
    https://dotnet.microsoft.com/download/dotnet/10.0

    If you already have an older SDR-VST3 installed, installing over it
    upgrades in place.