Skip to content

The Six Tabs

officialtomblack edited this page Nov 14, 2026 · 1 revision

The six tabs

SWIVEL's whole interface is six tabs across the bottom. Here's what each one shows and how to read it. (One-glance version.)

Two colors run through everything: 🟑 amber = Wi-Fi, πŸ”΅ blue = Bluetooth / BLE.

LIVE

Everything the phone hears, the moment it arrives, on a radar scope. The scope shows signal strength, not direction: a bright dot near the middle is strong (close); a faint dot near the edge is weak (far). It does not point at where a device is. The stacked amber/blue histogram shows how many contacts fall at each strength. Scanning starts by itself β€” there's no "start" button.

CAMERAS

Devices made by known camera brands β€” Ring, Wyze, Nest, Arlo, Axis, Hikvision, Dahua, Reolink and more β€” matched against the built-in manufacturer registry. Common router and base-station names (Spectrum, TP-Link, Netgear, ASUS, Eero, Arlo bases) are deliberately filtered out so they don't cry wolf. A match identifies the maker, not a confirmed camera model.

TRACKERS

Apple Find My / AirTag signatures, Tile, Samsung SmartTag, Chipolo, Pebblebee and named trackers. It also carries a "this one is separated and traveling with you" alert β€” the classic case of a tag slipped into a bag. (That following-you alert is wired up but not yet verified against a real separated tag on a device β€” treat it as unconfirmed for now.)

PUBLIC SAFETY

Hardware from surveillance and law-enforcement vendors β€” Flock Safety, Axon/TASER, Motorola Solutions, WatchGuard Video, Digital Ally β€” matched by manufacturer and Bluetooth identifiers and graded High / Medium / Low by how specific the match is. Look-alike companies (Flock Audio, Motorola Mobility) are kept out so they can't trip a false alarm. Read the label, not your fears: a match means a device made by that vendor is nearby β€” not that police, any agency, or any person is present.

ALERTS

A running list of everything that set off an audible alert, newest first. Three beeps = high-confidence (body-cam / ALPR / in-car makers). One beep = lower-confidence dual-use gear (expect more false alarms). The same device won't re-beep for ~90 seconds, so one car beside you doesn't nag β€” but a different vehicle still alerts on its own. Tap any entry for the signal, the vendor and the evidence. Turn alerts on/off and tune sensitivity under MORE.

MORE

Your controls:

  • PHONE SCAN Β· ON/OFF β€” genuinely stops every radio and the background service (a real "go quiet," not a fake label).
  • LOG EVERYTHING / FLAGGED ONLY β€” capture it all (default) or only devices that tripped an alert.
  • LE / CAMERA ALERTS and ALERT SENSITIVITY (Low / Medium / High).
  • CAMERA LOCATION ALERTS β€” optional GPS warning near fixed cameras you've mapped (uses more battery).
  • SWEEP SUBNET β€” the one active tool; lists live hosts on the Wi-Fi you're joined to.
  • EXPORT β€” one tap writes CSV + KML + JSON + WigleCSV.
  • DURESS Β· CLEAR ALL β€” the panic wipe: deletes every log and export instantly, no recovery.

Clone this wiki locally