Skip to content

Troubleshooting

officialtomblack edited this page Nov 14, 2026 · 1 revision

Troubleshooting

Nothing shows up / the LIVE screen is empty

Almost always the phone's Location switch is off. Android hands back zero scan results while the system Location toggle is off β€” even after you've granted SWIVEL permission. Turn on Wi-Fi, Bluetooth, and Location (all three), then reopen the app. Also confirm you said yes to both Location and Nearby devices / Bluetooth permissions.

It never beeps

  • Check MORE β†’ LE / CAMERA ALERTS is on.
  • Check MORE β†’ ALERT SENSITIVITY β€” on Low it only fires on the highest-confidence gear, rarely.
  • The beep uses your alarm volume (so it works on silent) β€” make sure alarm volume isn't at zero.
  • Real-world: high-confidence gear simply may not be near you. No beep is often correct.

Where do my exports go?

After you tap EXPORT, the files land in:

Android/data/com.millie.civops2/files/

Plug the phone into a computer with a USB cable and open that folder like a USB stick, or use your phone's Files app to copy them out. SWIVEL never sends them for you.

The sweep shows IPs but the MAC column is blank

That's an Android version limit, not a bug. SWEEP SUBNET reads MAC addresses out of the system on Android 8–12. On Android 13–15 the OS blocks that read for a modern-target app, so you get the IP list but MACs show blank. The IP sweep itself always works.

It can't hear a camera I can see on a pole

Fixed cameras (Flock/ALPR poles, traffic cams) usually transmit no Wi-Fi or Bluetooth β€” they run on solar + cellular. A passive scanner can't hear a silent device. SWIVEL catches gear that transmits (body cams, in-car systems, patrol-car Wi-Fi). See the FAQ.

Battery is draining faster than expected

Turn off CAMERA LOCATION ALERTS if you had it on (it tightens the GPS poll). To fully stop everything, use PHONE SCAN Β· OFF β€” it halts the radios and the background service.

Android warns "can't install / unknown apps"

Normal for any app outside the Play Store. On that prompt tap Settings, switch on Allow from this source for your browser or Files app, press back, then Install. It's not a warning about SWIVEL specifically.

An update won't install over the old one

Every release is signed with the same key (CN=SWIVEL), which is what lets Android update in place. If you ever installed a build signed with a different key, Android will refuse the update β€” uninstall first (you'll lose local logs), then install the current release. Using Obtainium avoids this by always pulling the official signed release.

Still stuck?

Open an issue or email theredwake.sh@protonmail.com. Please don't paste raw capture rows (they can contain MAC addresses, network names and your GPS track) β€” describe what happened instead.