Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

 - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
   linux-next for a couple of months without, to my knowledge, any
   negative reports (or any positive ones, come to that).

 - Also the Maple Tree from Liam Howlett. An overlapping range-based
   tree for vmas. It it apparently slightly more efficient in its own
   right, but is mainly targeted at enabling work to reduce mmap_lock
   contention.

   Liam has identified a number of other tree users in the kernel which
   could be beneficially onverted to mapletrees.

   Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
   at [1]. This has yet to be addressed due to Liam's unfortunately
   timed vacation. He is now back and we'll get this fixed up.

 - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
   clang-generated instrumentation to detect used-unintialized bugs down
   to the single bit level.

   KMSAN keeps finding bugs. New ones, as well as the legacy ones.

 - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
   memory into THPs.

 - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
   support file/shmem-backed pages.

 - userfaultfd updates from Axel Rasmussen

 - zsmalloc cleanups from Alexey Romanov

 - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
   memory-failure

 - Huang Ying adds enhancements to NUMA balancing memory tiering mode's
   page promotion, with a new way of detecting hot pages.

 - memcg updates from Shakeel Butt: charging optimizations and reduced
   memory consumption.

 - memcg cleanups from Kairui Song.

 - memcg fixes and cleanups from Johannes Weiner.

 - Vishal Moola provides more folio conversions

 - Zhang Yi removed ll_rw_block() :(

 - migration enhancements from Peter Xu

 - migration error-path bugfixes from Huang Ying

 - Aneesh Kumar added ability for a device driver to alter the memory
   tiering promotion paths. For optimizations by PMEM drivers, DRM
   drivers, etc.

 - vma merging improvements from Jakub Matěn.

 - NUMA hinting cleanups from David Hildenbrand.

 - xu xin added aditional userspace visibility into KSM merging
   activity.

 - THP & KSM code consolidation from Qi Zheng.

 - more folio work from Matthew Wilcox.

 - KASAN updates from Andrey Konovalov.

 - DAMON cleanups from Kaixu Xia.

 - DAMON work from SeongJae Park: fixes, cleanups.

 - hugetlb sysfs cleanups from Muchun Song.

 - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.

Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]

* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
  hugetlb: allocate vma lock for all sharable vmas
  hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
  hugetlb: fix vma lock handling during split vma and range unmapping
  mglru: mm/vmscan.c: fix imprecise comments
  mm/mglru: don't sync disk for each aging cycle
  mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
  mm: memcontrol: use do_memsw_account() in a few more places
  mm: memcontrol: deprecate swapaccounting=0 mode
  mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
  mm/secretmem: remove reduntant return value
  mm/hugetlb: add available_huge_pages() func
  mm: remove unused inline functions from include/linux/mm_inline.h
  selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
  selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
  selftests/vm: add thp collapse shmem testing
  selftests/vm: add thp collapse file and tmpfs testing
  selftests/vm: modularize thp collapse memory operations
  selftests/vm: dedup THP helpers
  mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
  mm/madvise: add file and shmem support to MADV_COLLAPSE
  ...

Author: torvalds

Documentation/ABI/testing/sysfs-kernel-mm-memory-tiers

@@ -0,0 +1,25 @@
+What:		/sys/devices/virtual/memory_tiering/
+Date:		August 2022
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	A collection of all the memory tiers allocated.
+
+		Individual memory tier details are contained in subdirectories
+		named by the abstract distance of the memory tier.
+
+		/sys/devices/virtual/memory_tiering/memory_tierN/
+
+
+What:		/sys/devices/virtual/memory_tiering/memory_tierN/
+		/sys/devices/virtual/memory_tiering/memory_tierN/nodes
+Date:		August 2022
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Directory with details of a specific memory tier
+
+		This is the directory containing information about a particular
+		memory tier, memtierN, where N is derived based on abstract distance.
+
+		A smaller value of N implies a higher (faster) memory tier in the
+		hierarchy.
+
+		nodes: NUMA nodes that are part of this memory tier.
+

Documentation/accounting/delay-accounting.rst

@@ -13,7 +13,7 @@ a) waiting for a CPU (while being runnable)
 b) completion of synchronous block I/O initiated by the task
 c) swapping in pages
 d) memory reclaim
-e) thrashing page cache
+e) thrashing
 f) direct compact
 g) write-protect copy
 

Documentation/admin-guide/cgroup-v1/memory.rst

@@ -299,7 +299,7 @@ Per-node-per-memcgroup LRU (cgroup's private LRU) is guarded by
 lruvec->lru_lock; PG_lru bit of page->flags is cleared before
 isolating a page from its LRU under lruvec->lru_lock.
 
-2.7 Kernel Memory Extension (CONFIG_MEMCG_KMEM)
+2.7 Kernel Memory Extension
 -----------------------------------------------
 
 With the Kernel memory extension, the Memory Controller is able to limit
@@ -386,8 +386,6 @@ U != 0, K >= U:
 
 a. Enable CONFIG_CGROUPS
 b. Enable CONFIG_MEMCG
-c. Enable CONFIG_MEMCG_SWAP (to use swap extension)
-d. Enable CONFIG_MEMCG_KMEM (to use kmem extension)
 
 3.1. Prepare the cgroups (see cgroups.txt, Why are cgroups needed?)
 -------------------------------------------------------------------

Documentation/admin-guide/kernel-parameters.txt

@@ -1469,6 +1469,14 @@
 			Permit 'security.evm' to be updated regardless of
 			current integrity status.
 
+	early_page_ext [KNL] Enforces page_ext initialization to earlier
+			stages so cover more early boot allocations.
+			Please note that as side effect some optimizations
+			might be disabled to achieve that (e.g. parallelized
+			memory initialization is disabled) so the boot process
+			might take longer, especially on systems with a lot of
+			memory. Available with CONFIG_PAGE_EXTENSION=y.
+
 	failslab=
 	fail_usercopy=
 	fail_page_alloc=
@@ -6041,12 +6049,6 @@
 			This parameter controls use of the Protected
 			Execution Facility on pSeries.
 
-	swapaccount=	[KNL]
-			Format: [0|1]
-			Enable accounting of swap in memory resource
-			controller if no parameter or 1 is given or disable
-			it if 0 is given (See Documentation/admin-guide/cgroup-v1/memory.rst)
-
 	swiotlb=	[ARM,IA-64,PPC,MIPS,X86]
 			Format: { <int> [,<int>] | force | noforce }
 			<int> -- Number of I/O TLB slabs

Documentation/admin-guide/mm/cma_debugfs.rst

@@ -5,10 +5,10 @@ CMA Debugfs Interface
 The CMA debugfs interface is useful to retrieve basic information out of the
 different CMA areas and to test allocation/release in each of the areas.
 
-Each CMA zone represents a directory under <debugfs>/cma/, indexed by the
-kernel's CMA index. So the first CMA zone would be:
+Each CMA area represents a directory under <debugfs>/cma/, represented by
+its CMA name like below:
 
-	<debugfs>/cma/cma-0
+	<debugfs>/cma/<cma_name>
 
 The structure of the files created under that directory is as follows:
 
@@ -18,8 +18,8 @@ The structure of the files created under that directory is as follows:
  - [RO] bitmap: The bitmap of page states in the zone.
  - [WO] alloc: Allocate N pages from that CMA area. For example::
 
-	echo 5 > <debugfs>/cma/cma-2/alloc
+	echo 5 > <debugfs>/cma/<cma_name>/alloc
 
-would try to allocate 5 pages from the cma-2 area.
+would try to allocate 5 pages from the 'cma_name' area.
 
  - [WO] free: Free N pages from that CMA area, similar to the above.

Documentation/admin-guide/mm/damon/index.rst

@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-========================
-Monitoring Data Accesses
-========================
+==========================
+DAMON: Data Access MONitor
+==========================
 
 :doc:`DAMON </mm/damon/index>` allows light-weight data access monitoring.
 Using DAMON, users can analyze the memory access patterns of their systems and

Documentation/admin-guide/mm/damon/start.rst

@@ -29,16 +29,9 @@ called DAMON Operator (DAMO).  It is available at
 https://github.com/awslabs/damo.  The examples below assume that ``damo`` is on
 your ``$PATH``.  It's not mandatory, though.
 
-Because DAMO is using the debugfs interface (refer to :doc:`usage` for the
-detail) of DAMON, you should ensure debugfs is mounted.  Mount it manually as
-below::
-
-    # mount -t debugfs none /sys/kernel/debug/
-
-or append the following line to your ``/etc/fstab`` file so that your system
-can automatically mount debugfs upon booting::
-
-    debugfs /sys/kernel/debug debugfs defaults 0 0
+Because DAMO is using the sysfs interface (refer to :doc:`usage` for the
+detail) of DAMON, you should ensure :doc:`sysfs </filesystems/sysfs>` is
+mounted.
 
 
 Recording Data Access Patterns

Documentation/admin-guide/mm/damon/usage.rst

@@ -393,6 +393,11 @@ the files as above.  Above is only for an example.
 debugfs Interface
 =================
 
+.. note::
+
+  DAMON debugfs interface will be removed after next LTS kernel is released, so
+  users should move to the :ref:`sysfs interface <sysfs_interface>`.
+
 DAMON exports eight files, ``attrs``, ``target_ids``, ``init_regions``,
 ``schemes``, ``monitor_on``, ``kdamond_pid``, ``mk_contexts`` and
 ``rm_contexts`` under its debugfs directory, ``<debugfs>/damon/``.

Documentation/admin-guide/mm/index.rst

@@ -32,6 +32,7 @@ the Linux memory management.
    idle_page_tracking
    ksm
    memory-hotplug
+   multigen_lru
    nommu-mmap
    numa_memory_policy
    numaperf

Documentation/admin-guide/mm/ksm.rst

@@ -184,6 +184,42 @@ The maximum possible ``pages_sharing/pages_shared`` ratio is limited by the
 ``max_page_sharing`` tunable. To increase the ratio ``max_page_sharing`` must
 be increased accordingly.
 
+Monitoring KSM profit
+=====================
+
+KSM can save memory by merging identical pages, but also can consume
+additional memory, because it needs to generate a number of rmap_items to
+save each scanned page's brief rmap information. Some of these pages may
+be merged, but some may not be abled to be merged after being checked
+several times, which are unprofitable memory consumed.
+
+1) How to determine whether KSM save memory or consume memory in system-wide
+   range? Here is a simple approximate calculation for reference::
+
+	general_profit =~ pages_sharing * sizeof(page) - (all_rmap_items) *
+			  sizeof(rmap_item);
+
+   where all_rmap_items can be easily obtained by summing ``pages_sharing``,
+   ``pages_shared``, ``pages_unshared`` and ``pages_volatile``.
+
+2) The KSM profit inner a single process can be similarly obtained by the
+   following approximate calculation::
+
+	process_profit =~ ksm_merging_pages * sizeof(page) -
+			  ksm_rmap_items * sizeof(rmap_item).
+
+   where ksm_merging_pages is shown under the directory ``/proc/<pid>/``,
+   and ksm_rmap_items is shown in ``/proc/<pid>/ksm_stat``.
+
+From the perspective of application, a high ratio of ``ksm_rmap_items`` to
+``ksm_merging_pages`` means a bad madvise-applied policy, so developers or
+administrators have to rethink how to change madvise policy. Giving an example
+for reference, a page's size is usually 4K, and the rmap_item's size is
+separately 32B on 32-bit CPU architecture and 64B on 64-bit CPU architecture.
+so if the ``ksm_rmap_items/ksm_merging_pages`` ratio exceeds 64 on 64-bit CPU
+or exceeds 128 on 32-bit CPU, then the app's madvise policy should be dropped,
+because the ksm profit is approximately zero or negative.
+
 Monitoring KSM events
 =====================