Fix when HAL_DAC_MODULE_ENABLED is not defined

Fix stm32duino#26

Signed-off-by: Frederic Pillon <frederic.pillon@st.com>

Author: fpistm

cores/arduino/stm32/analog.c

@@ -191,6 +191,31 @@ static uint32_t get_adc_channel(PinName pin)
   return channel;
 }
 
+static uint32_t get_pwm_channel(PinName pin)
+{
+  uint32_t function = pinmap_function(pin, PinMap_PWM);
+  uint32_t channel = 0;
+  switch(STM_PIN_CHANNEL(function)) {
+    case 1:
+      channel = TIM_CHANNEL_1;
+      break;
+    case 2:
+      channel = TIM_CHANNEL_2;
+      break;
+    case 3:
+      channel = TIM_CHANNEL_3;
+      break;
+    case 4:
+      channel = TIM_CHANNEL_4;
+      break;
+    default:
+      channel = 0;
+    break;
+   }
+  return channel;
+}
+
+#ifdef HAL_DAC_MODULE_ENABLED
 static uint32_t get_dac_channel(PinName pin)
 {
   uint32_t function = pinmap_function(pin, PinMap_DAC);
@@ -216,29 +241,6 @@ static uint32_t get_dac_channel(PinName pin)
   return channel;
 }
 
-static uint32_t get_pwm_channel(PinName pin)
-{
-  uint32_t function = pinmap_function(pin, PinMap_PWM);
-  uint32_t channel = 0;
-  switch(STM_PIN_CHANNEL(function)) {
-    case 1:
-      channel = TIM_CHANNEL_1;
-      break;
-    case 2:
-      channel = TIM_CHANNEL_2;
-      break;
-    case 3:
-      channel = TIM_CHANNEL_3;
-      break;
-    case 4:
-      channel = TIM_CHANNEL_4;
-      break;
-    default:
-      channel = 0;
-    break;
-   }
-  return channel;
-}
 ////////////////////////// DAC INTERFACE FUNCTIONS /////////////////////////////
 
 /**
@@ -369,6 +371,7 @@ void dac_stop(PinName pin)
     return;
   }
 }
+#endif //HAL_DAC_MODULE_ENABLED
 
 
 ////////////////////////// ADC INTERFACE FUNCTIONS /////////////////////////////

cores/arduino/wiring_analog.c

@@ -73,20 +73,23 @@ void analogWrite(uint32_t ulPin, uint32_t ulValue) {
   uint8_t do_init = 0;
   PinName p = analogToPinName(ulPin);
   if(p != NC) {
+#ifdef HAL_DAC_MODULE_ENABLED
     if(pin_in_pinmap(p, PinMap_DAC)) {
       if(is_pin_configured(p, g_anOutputPinConfigured) == false) {
         do_init = 1;
         set_pin_configured(p, g_anOutputPinConfigured);
       }
       ulValue = mapResolution(ulValue, _writeResolution, DACC_RESOLUTION);
       dac_write_value(p, ulValue, do_init);
-    } else if(pin_in_pinmap(p, PinMap_PWM)) {
-      if(is_pin_configured(p, g_anOutputPinConfigured) == false) {
-        do_init = 1;
-        set_pin_configured(p, g_anOutputPinConfigured);
-      }
-      ulValue = mapResolution(ulValue, _writeResolution, PWM_RESOLUTION);
-      pwm_start(p, PWM_FREQUENCY*PWM_MAX_DUTY_CYCLE,
+    } else
+#endif //HAL_DAC_MODULE_ENABLED
+      if(pin_in_pinmap(p, PinMap_PWM)) {
+        if(is_pin_configured(p, g_anOutputPinConfigured) == false) {
+          do_init = 1;
+          set_pin_configured(p, g_anOutputPinConfigured);
+        }
+        ulValue = mapResolution(ulValue, _writeResolution, PWM_RESOLUTION);
+        pwm_start(p, PWM_FREQUENCY*PWM_MAX_DUTY_CYCLE,
                    PWM_MAX_DUTY_CYCLE,
                    ulValue, do_init);
       } else { //DIGITAL PIN ONLY
@@ -98,7 +101,7 @@ void analogWrite(uint32_t ulPin, uint32_t ulValue) {
         }
         else {
           digitalWrite(ulPin, HIGH);
-	  }
+      }
     }
   }
 }

cores/arduino/wiring_digital.c

@@ -35,9 +35,12 @@ void pinMode( uint32_t ulPin, uint32_t ulMode )
   if(p != NC) {
     // If the pin that support PWM or DAC output, we need to turn it off
     if(is_pin_configured(p, g_anOutputPinConfigured)) {
+#ifdef HAL_DAC_MODULE_ENABLED
       if(pin_in_pinmap(p, PinMap_DAC)) {
         dac_stop(p);
-      } else if(pin_in_pinmap(p, PinMap_PWM)) {
+      } else
+#endif //HAL_DAC_MODULE_ENABLED
+      if(pin_in_pinmap(p, PinMap_PWM)) {
         pwm_stop(p);
       }
       reset_pin_configured(p, g_anOutputPinConfigured);