Repository navigation
Filamatch 0.10.0
Install
- Download Filamatch-0.10.0.zip below and unzip it (you get a
Filamatchfolder). - Move the folder into Fusion's add-ins folder:
- macOS:
~/Library/Application Support/Autodesk/Autodesk Fusion 360/API/AddIns/ - Windows:
%APPDATA%\Autodesk\Autodesk Fusion 360\API\AddIns\
- macOS:
- Restart Fusion. The Filamatch button is on the UTILITIES tab, ADD-INS panel.
Changes
Filamatch now works with any printer: set up its slots by hand. The
printed values know 206 filaments from 11 makers' data sheets.
New
- Manual printer. For any printer Filamatch cannot read (Prusa,
Creality, Klipper, single-nozzle printers): Settings > Printer > Manual
takes the printer's name, nozzle size and material, and which Filamatch
filament is in each slot (with grams left if you like). Fill from
design puts the open design's filaments into the slots. Home then
matches the design to these slots, the design check knows the nozzle,
Use it works, and the slicer project gets each slot's filament preset. - More filament data sheets: 167 more engineering filaments from
Prusament, addnorth, Fillamentum, Extrudr, eSun, Elegoo, Overture, Sunlu
and 3DXTech, with a link to each sheet (206 filaments from 11 makers in
all). The printed values use 129 of them: the ones with values per print
direction. A sheet with values along the layers only gets its across-the-
layers values estimated from its type (±30 %); a sheet without a tensile
modulus takes its stiffness from the type's generic values. Safe now
takes the weakest bar, along or across the layers. Sheets that give one
value without a direction, often from moulded bars, are kept with their
links but not used.
Changed
- A printer slot without a filament shows "Empty" in the slot list.
Fixed
- Your own presets when the slicer is signed out. Bambu Studio and
OrcaSlicer read your own presets from one folder: your account's when
signed in, else a "default" folder. A preset saved while signed in was
missing when signed out, so the slicer's printer sync replaced it with a
generic one (for example "Polymaker PPS GF" became "Generic PPS"). With
Save new filament presets in the slicer on, Filamatch now copies the
presets a project uses into the folder the slicer uses (never replacing
one); with it off, the log says why. - Switching the printer source (for example from Manual back to the
Bambu printers) no longer fails with "maps to unknown Bambuddy slot". A
slot you chose for another source is set aside, and works again when you
switch back. - Use it and adding the printer's filaments use the first printer when
the saved printer is not in the chosen source any more (after switching
sources).
What is tested: the manual printer in the module and palette self-tests,
in the palette preview (the form, Fill from design, Save, matching on Home,
the ready check, the welcome screen), and in Fusion: set up and used by
hand, and a real design's filaments matched to manual slots (automatic)
with the right slicer presets and nozzle. Switching from Manual back to
the Bambu printers was tested in Fusion (the slot error above was found
there and fixed). The preset copy was tested in Fusion with Bambu Studio
signed out: after Send to Bambu, Bambu Studio's sync kept "Polymaker
PPS GF". The data sheet values were typed from the sheets and spot-checked
(Prusament PA11 CF: 17 values, Overture ASA: 9, three more by the
collectors); scripts/datasheet_docs.py checks every record. Not tested:
a print from a manual printer.
The slicer test matrix is unchanged against 0.9.1 (24 cases the same); the
printed weight still matches the slicer within 3.3 % on average.
Slicer test matrix
Slicer test matrix against v0.9.1: 24 same.
| Case | Result | Estimate |
|---|---|---|
| h2c-bambu | SAME | 299 min, 82.9 g |
| h2c-orca | SAME | 207 min, 33.3 g |
| h2d-bambu | SAME | 461 min, 139.6 g |
| h2d-database-bambu | SAME | 279 min, 77.1 g |
| h2d-database-orca | SAME | 121 min, 30.0 g |
| h2d-orca | SAME | 426 min, 103.7 g |
| h2d-touching-bambu | SAME | 92 min, 28.2 g |
| h2d-touching-orca | SAME | 91 min, 25.5 g |
| h3c-bambu | SAME | 76 min, 36.9 g |
| prusa-coreone-prusaslicer | SAME | grams min, 3.8 g |
| prusa-indx4t-orca | SAME | 120 min, 20.3 g |
| prusa-mk4mmu3-prusaslicer | SAME | grams min, 61.2 g |
| prusa-mmu3-orca | SAME | 534 min, 146.8 g |
| prusa-xl5t-database-prusaslicer | SAME | grams min, 30.2 g |
| prusa-xl5t-orca | SAME | 100 min, 34.3 g |
| prusa-xl5t-prusaslicer | SAME | grams min, 29.5 g |
| prusaslicer-layout | SAME | tools (T0, T1, T2, T3) |
| u1-mixed-orca | SAME | 85 min, 36.9 g |
| u1-orca | SAME | 121 min, 34.2 g |
| x1c-bambu | SAME | 598 min, 159.4 g |
| x1c-orca | SAME | 486 min, 75.9 g |
| x1c-touching-orca | SAME | 196 min, 37.4 g |
| x2d-bambu | SAME | 419 min, 135.9 g |
| x2d-orca | SAME | 354 min, 65.5 g |
If Filamatch saves you time: buy me a coffee.