Skip to content

Releases

Filamatch 0.11.0

Choose a tag to compare

@percosys percosys released this 09 Nov 02:18

Install

  1. Download Filamatch-0.11.0.zip below and unzip it (you get a Filamatch folder).
  2. Move the folder into Fusion's add-ins folder:
    • macOS: ~/Library/Application Support/Autodesk/Autodesk Fusion 360/API/AddIns/
    • Windows: %APPDATA%\Autodesk\Autodesk Fusion 360\API\AddIns\
  3. Restart Fusion. The Filamatch button is on the UTILITIES tab, ADD-INS panel.

Changes

The palette now matches Fusion's light and dark themes, and its text is
easier to read.

New

  • Light theme. The palette now follows Fusion's theme: light in
    Fusion's light themes, dark in the dark ones. With Fusion set to follow
    the computer, it follows macOS or Windows.

Changed

  • Better contrast: small grey text and the main button are easier to read
    (every text colour is at least 4.5:1 on its background, in both themes).
  • Bambu Lab X2D: the nozzle sides now say "Main" and "Aux", as Bambu
    Studio does, in place of "(L)" and "(R)".

Tested
Both themes were checked in the palette preview (Home and Settings), and
the light theme by hand in Fusion. Every text colour was measured against its
background (at least 4.5:1), and all 107 buttons and fields have a name a
screen reader can say. Not tested: a full screen reader and keyboard-only
run, and the X2D labels on a real X2D.

The slicer test matrix is unchanged against 0.10.0 (24 cases the same).

Slicer test matrix

Slicer test matrix against v0.10.0: 24 same.

Case Result Estimate
h2c-bambu SAME 299 min, 82.9 g
h2c-orca SAME 207 min, 33.3 g
h2d-bambu SAME 461 min, 139.6 g
h2d-database-bambu SAME 279 min, 77.1 g
h2d-database-orca SAME 121 min, 30.0 g
h2d-orca SAME 426 min, 103.7 g
h2d-touching-bambu SAME 92 min, 28.2 g
h2d-touching-orca SAME 91 min, 25.5 g
h3c-bambu SAME 76 min, 36.9 g
prusa-coreone-prusaslicer SAME grams min, 3.8 g
prusa-indx4t-orca SAME 120 min, 20.3 g
prusa-mk4mmu3-prusaslicer SAME grams min, 61.2 g
prusa-mmu3-orca SAME 534 min, 146.8 g
prusa-xl5t-database-prusaslicer SAME grams min, 30.2 g
prusa-xl5t-orca SAME 100 min, 34.3 g
prusa-xl5t-prusaslicer SAME grams min, 29.5 g
prusaslicer-layout SAME tools (T0, T1, T2, T3)
u1-mixed-orca SAME 85 min, 36.9 g
u1-orca SAME 121 min, 34.2 g
x1c-bambu SAME 598 min, 159.4 g
x1c-orca SAME 486 min, 75.9 g
x1c-touching-orca SAME 196 min, 37.4 g
x2d-bambu SAME 419 min, 135.9 g
x2d-orca SAME 354 min, 65.5 g

If Filamatch saves you time: buy me a coffee.

Filamatch 0.10.0

Choose a tag to compare

@percosys percosys released this 09 Nov 01:59

Install

  1. Download Filamatch-0.10.0.zip below and unzip it (you get a Filamatch folder).
  2. Move the folder into Fusion's add-ins folder:
    • macOS: ~/Library/Application Support/Autodesk/Autodesk Fusion 360/API/AddIns/
    • Windows: %APPDATA%\Autodesk\Autodesk Fusion 360\API\AddIns\
  3. Restart Fusion. The Filamatch button is on the UTILITIES tab, ADD-INS panel.

Changes

Filamatch now works with any printer: set up its slots by hand. The
printed values know 206 filaments from 11 makers' data sheets.

New

  • Manual printer. For any printer Filamatch cannot read (Prusa,
    Creality, Klipper, single-nozzle printers): Settings > Printer > Manual
    takes the printer's name, nozzle size and material, and which Filamatch
    filament is in each slot (with grams left if you like). Fill from
    design
    puts the open design's filaments into the slots. Home then
    matches the design to these slots, the design check knows the nozzle,
    Use it works, and the slicer project gets each slot's filament preset.
  • More filament data sheets: 167 more engineering filaments from
    Prusament, addnorth, Fillamentum, Extrudr, eSun, Elegoo, Overture, Sunlu
    and 3DXTech, with a link to each sheet (206 filaments from 11 makers in
    all). The printed values use 129 of them: the ones with values per print
    direction. A sheet with values along the layers only gets its across-the-
    layers values estimated from its type (±30 %); a sheet without a tensile
    modulus takes its stiffness from the type's generic values. Safe now
    takes the weakest bar, along or across the layers. Sheets that give one
    value without a direction, often from moulded bars, are kept with their
    links but not used.

Changed

  • A printer slot without a filament shows "Empty" in the slot list.

Fixed

  • Your own presets when the slicer is signed out. Bambu Studio and
    OrcaSlicer read your own presets from one folder: your account's when
    signed in, else a "default" folder. A preset saved while signed in was
    missing when signed out, so the slicer's printer sync replaced it with a
    generic one (for example "Polymaker PPS GF" became "Generic PPS"). With
    Save new filament presets in the slicer on, Filamatch now copies the
    presets a project uses into the folder the slicer uses (never replacing
    one); with it off, the log says why.
  • Switching the printer source (for example from Manual back to the
    Bambu printers) no longer fails with "maps to unknown Bambuddy slot". A
    slot you chose for another source is set aside, and works again when you
    switch back.
  • Use it and adding the printer's filaments use the first printer when
    the saved printer is not in the chosen source any more (after switching
    sources).

What is tested: the manual printer in the module and palette self-tests,
in the palette preview (the form, Fill from design, Save, matching on Home,
the ready check, the welcome screen), and in Fusion: set up and used by
hand, and a real design's filaments matched to manual slots (automatic)
with the right slicer presets and nozzle. Switching from Manual back to
the Bambu printers was tested in Fusion (the slot error above was found
there and fixed). The preset copy was tested in Fusion with Bambu Studio
signed out: after Send to Bambu, Bambu Studio's sync kept "Polymaker
PPS GF". The data sheet values were typed from the sheets and spot-checked
(Prusament PA11 CF: 17 values, Overture ASA: 9, three more by the
collectors); scripts/datasheet_docs.py checks every record. Not tested:
a print from a manual printer.

The slicer test matrix is unchanged against 0.9.1 (24 cases the same); the
printed weight still matches the slicer within 3.3 % on average.

Slicer test matrix

Slicer test matrix against v0.9.1: 24 same.

Case Result Estimate
h2c-bambu SAME 299 min, 82.9 g
h2c-orca SAME 207 min, 33.3 g
h2d-bambu SAME 461 min, 139.6 g
h2d-database-bambu SAME 279 min, 77.1 g
h2d-database-orca SAME 121 min, 30.0 g
h2d-orca SAME 426 min, 103.7 g
h2d-touching-bambu SAME 92 min, 28.2 g
h2d-touching-orca SAME 91 min, 25.5 g
h3c-bambu SAME 76 min, 36.9 g
prusa-coreone-prusaslicer SAME grams min, 3.8 g
prusa-indx4t-orca SAME 120 min, 20.3 g
prusa-mk4mmu3-prusaslicer SAME grams min, 61.2 g
prusa-mmu3-orca SAME 534 min, 146.8 g
prusa-xl5t-database-prusaslicer SAME grams min, 30.2 g
prusa-xl5t-orca SAME 100 min, 34.3 g
prusa-xl5t-prusaslicer SAME grams min, 29.5 g
prusaslicer-layout SAME tools (T0, T1, T2, T3)
u1-mixed-orca SAME 85 min, 36.9 g
u1-orca SAME 121 min, 34.2 g
x1c-bambu SAME 598 min, 159.4 g
x1c-orca SAME 486 min, 75.9 g
x1c-touching-orca SAME 196 min, 37.4 g
x2d-bambu SAME 419 min, 135.9 g
x2d-orca SAME 354 min, 65.5 g

If Filamatch saves you time: buy me a coffee.

Filamatch 0.9.1

Choose a tag to compare

@percosys percosys released this 09 Nov 01:02

Install

  1. Download Filamatch-0.9.1.zip below and unzip it (you get a Filamatch folder).
  2. Move the folder into Fusion's add-ins folder:
    • macOS: ~/Library/Application Support/Autodesk/Autodesk Fusion 360/API/AddIns/
    • Windows: %APPDATA%\Autodesk\Autodesk Fusion 360\API\AddIns\
  3. Restart Fusion. The Filamatch button is on the UTILITIES tab, ADD-INS panel.

Changes

Fusion Simulation now gets sensible values from every Filamatch filament,
with Fusion uses the printed values on or off. If you added filaments
before 0.9.1, add them again (Add filaments) to update them.

Fixed

  • Filament materials have their filament's own stiffness and strength.
    Filamatch makes a filament's Fusion material from the stock material
    nearest in colour, and it kept that material's mechanical values: a blue
    Bambu Lab ABS was 6.89 GPa stiff (real ABS is about 2.2 GPa), a black
    PAHT-CF only 0.91 GPa. Now the material gets the values of a typical
    print at 100% infill (between along and across the layers): from the
    filament's data sheet when Filamatch has it, else the generic values for
    its type. The material's description names them ("solid values: typical
    print, Bambu Lab PAHT-CF (data sheet V3.0)"). This is what Fusion
    Simulation uses while Fusion uses the printed values is off. A
    filament without data, or a flexible one (TPU, TPE...), keeps the stock
    values, and its description says "no solid values (...)": do not trust a
    simulation with it. Filaments you added before get the values the next
    time Filamatch adds or updates them.
  • Printed values of a filament without data. A material with neither a
    data sheet nor a known type (for example Fusion's "Nylon 6/6") kept its
    solid stiffness and strength next to its printed density. Now its own
    values are scaled for the infill like every other body, with the warning
    "No printed test data for this filament ... Often too strong (±60%)". A
    Filamatch filament without data gets no printed stiffness and strength
    (its values are a stock material's), and neither does a flexible
    filament: a linear simulation does not fit it. A filled type with a
    number ("ABS-GF30") no longer counts as its plain type.

New

  • scripts/as_printed_static_check.py: a static check of the printed values
    with the free FEA program scikit-fem (see
    the strength model).

What is tested: in Fusion 2706.1.17, 23 Filamatch favorites were updated:
21 got their data sheet or generic values (for example Bambu Lab ABS 6.89 →
2.08 GPa, PAHT-CF 0.91 → 3.02 GPa), the TPU and a generic ABS-GF30 were
marked "no solid values". A Static Stress study used the "as printed"
copies with exactly Filamatch's values; Fusion solves only in the cloud, so
the study was not solved. The free FEA check instead: three test parts, the
deflections within 1.5–8 % of beam theory, the values on the safe side in
bending. Module self-tests and test files pass.

Slicer test matrix

Slicer test matrix against v0.9.0: 24 same.

Case Result Estimate
h2c-bambu SAME 299 min, 82.9 g
h2c-orca SAME 207 min, 33.3 g
h2d-bambu SAME 461 min, 139.6 g
h2d-database-bambu SAME 279 min, 77.1 g
h2d-database-orca SAME 121 min, 30.0 g
h2d-orca SAME 426 min, 103.7 g
h2d-touching-bambu SAME 92 min, 28.2 g
h2d-touching-orca SAME 91 min, 25.5 g
h3c-bambu SAME 76 min, 36.9 g
prusa-coreone-prusaslicer SAME grams min, 3.8 g
prusa-indx4t-orca SAME 120 min, 20.3 g
prusa-mk4mmu3-prusaslicer SAME grams min, 61.2 g
prusa-mmu3-orca SAME 534 min, 146.8 g
prusa-xl5t-database-prusaslicer SAME grams min, 30.2 g
prusa-xl5t-orca SAME 100 min, 34.3 g
prusa-xl5t-prusaslicer SAME grams min, 29.5 g
prusaslicer-layout SAME tools (T0, T1, T2, T3)
u1-mixed-orca SAME 85 min, 36.9 g
u1-orca SAME 121 min, 34.2 g
x1c-bambu SAME 598 min, 159.4 g
x1c-orca SAME 486 min, 75.9 g
x1c-touching-orca SAME 196 min, 37.4 g
x2d-bambu SAME 419 min, 135.9 g
x2d-orca SAME 354 min, 65.5 g

If Filamatch saves you time: buy me a coffee.

Filamatch 0.9.0

Choose a tag to compare

@percosys percosys released this 08 Nov 22:36

Install

  1. Download Filamatch-0.9.0.zip below and unzip it (you get a Filamatch folder).
  2. Move the folder into Fusion's add-ins folder:
    • macOS: ~/Library/Application Support/Autodesk/Autodesk Fusion 360/API/AddIns/
    • Windows: %APPDATA%\Autodesk\Autodesk Fusion 360\API\AddIns\
  3. Restart Fusion. The Filamatch button is on the UTILITIES tab, ADD-INS panel.

Changes

New

  • Printed weight and strength. A new card on Home, above the send
    button, estimates what each filament body weighs as printed: walls, top
    and bottom layers and infill from the print settings (a body's own
    settings count). Check with the slicer slices each body once with
    OrcaSlicer or Bambu Studio for its exact grams.
    • The switch Fusion uses the printed values (off until you turn it
      on, kept per design) gives each body its own "… · as printed" copy of
      its filament, with the printed density, stiffness and strength. Fusion's
      mass, Physical Properties and Simulation then use them. A copy follows
      when its body's settings change. Turning the switch off puts the
      filaments back and removes the copies from the design.
    • Stiffness and strength come from the filament's own data sheet when
      Filamatch has it (Bambu Lab and Polymaker engineering filaments, see
      below), else from generic values for its type (the median of 29 data
      sheets from 6 makers). Choose Safe (across the layers, the weakest
      direction; moist values for a nylon whose sheet has them) or
      Typical. Fusion Simulation takes one value for every direction.
    • Where the values come from names each data sheet. These are rough
      estimates (±25 % from a data sheet, ±25–40 % generic), never design
      values: check important parts with a test print.
  • Filament data sheets. Filamatch/data/datasheets/ has the makers'
    printed-part values for 16 Bambu Lab and 23 Polymaker engineering
    filaments: stiffness, strength, elongation, bending, impact and heat
    values along and across the layers, with the test standard, how the test
    bars were printed, and a link to each maker's data sheet. The folder's
    README has the table. Errors on a sheet are named in its notes, not
    used.
  • Design check. The ready check above the send button also warns:
    • when the design uses more filaments than the printer has slots (all
      AMS and external slots of a connected printer) or, without a printer,
      than the PrusaSlicer printer has tools;
    • when filaments cannot share one bed: a hot filament (ABS, ASA, PC, PA,
      fibre-filled ones) with a cool one (PLA, PETG, TPU, PVA). The groups are
      Bambu Studio's own; the message gives each type's bed temperature;
    • when a carbon or glass fibre filament (CF, GF) would print with a
      stainless steel or brass nozzle. The direct LAN connection and Bambuddy
      now read the nozzle material from the printer;
    • when a filament's bodies are thinner than the nozzle (about; measured
      across, so a thin colour layer on top does not count).
      Each warning has Show, which selects the bodies in Fusion.
  • Click a filament's name to select its bodies in Fusion.
  • Use it next to "≠ Loaded: …" gives the bodies the loaded spool's
    filament in one click. The filament is added to Fusion like an import
    from the printer, and the slot stays chosen.
  • Print settings per body. Each filament row has an arrow (›); open it
    to see the filament's bodies (with
    their component, "Body1 in TEF", so two bodies with one name are told
    apart). Edit gives one body, or all bodies of the filament, their own
    infill %, infill type, walls, top and bottom layers. Empty fields show the
    print process's value in grey ("15% (process)"). The settings stay on the
    bodies in the design; Bambu Studio, OrcaSlicer and PrusaSlicer get them as
    the body's own settings. The filament row shows "⚙" when some of its
    bodies have their own settings.
  • Infill type lists the types the chosen slicer has. Filamatch asks
    each slicer once per version: PrusaSlicer lists them in its help; Bambu
    Studio and OrcaSlicer keep only the type names they know when they load a
    3MF. A type with another name in another slicer is renamed ("zig-zag" in
    Bambu Studio is "rectilinear" in OrcaSlicer and PrusaSlicer); a type the
    slicer does not have at all is named in the ready check.
  • Supports are left to the slicer: they depend on how the part sits on the
    bed, and the slicers paint them where they are needed.
  • Filament cost in the print estimate, for example "filament cost about
    $0.30". It is each filament's grams at the price per kg in its slicer
    preset (PrusaSlicer works it out itself). Set the currency symbol under
    Settings > Export; set the prices in the slicer to what you pay.
  • A copy of a Filamatch filament (for example a body's "as printed" copy,
    with the printed density) stays that filament: same row, slot, colour and
    slicer preset, and the filament's own density in the slicer. The copy
    names its source in its description (filamatch_source=<name>).

Changed

  • Colour matching compares colours the way people see them (CIEDE2000)
    instead of by RGB distance. Two shades of green now count as close, and a
    grey no longer counts as close to a colour. The matches on a real H2D
    with eight spools stayed the same.

Fixed

  • An empty design (no bodies yet) no longer writes an error to the log.
  • The palette no longer gets stuck on the sample data ("Preview with
    sample data") when Fusion is slow to connect it, for example right after
    the add-in starts. It waits up to 3 seconds, and connects later when
    Fusion's link shows up after that.

Checked with the Bambu Studio 2.9.1, OrcaSlicer 2.5 and PrusaSlicer 2.9.7
command lines: a body with 100% infill and 6 walls gets more filament in all
three, also when touching bodies are joined into one object, and an infill
type on a body is kept (Bambu Studio 21 types, OrcaSlicer 26, PrusaSlicer
18). In Fusion, a test design (with a component placed twice) was measured,
selected, given body settings, exported with them and sliced.

What is tested for the printed weight and strength: the weight model
against Bambu Studio's sliced grams for 6 shapes with 3 settings (mean error
3.3 %, largest 7.2 %); in Fusion, the switch on and off (one copy per body,
all copies removed), Safe and Typical written into the copies (stiffness,
shear modulus, yield and tensile strength, Poisson's ratio, density), a
Bambu Lab PAHT-CF body with its data sheet values, a "Polymaker PPS GF"
body found under its catalog name, and a PLA body with the generic values.
Every data sheet value was read from the sheet and checked a second time;
all 45 data sheet links open. Not tested: a Static Stress study in Fusion
Simulation with these materials (Fusion's API cannot run one).

The slicer test matrix is unchanged against 0.8.0 (24 cases the same).

Slicer test matrix

Slicer test matrix against v0.8.0: 24 same.

Case Result Estimate
h2c-bambu SAME 299 min, 82.9 g
h2c-orca SAME 207 min, 33.3 g
h2d-bambu SAME 461 min, 139.6 g
h2d-database-bambu SAME 279 min, 77.1 g
h2d-database-orca SAME 121 min, 30.0 g
h2d-orca SAME 426 min, 103.7 g
h2d-touching-bambu SAME 92 min, 28.2 g
h2d-touching-orca SAME 91 min, 25.5 g
h3c-bambu SAME 76 min, 36.9 g
prusa-coreone-prusaslicer SAME grams min, 3.8 g
prusa-indx4t-orca SAME 120 min, 20.3 g
prusa-mk4mmu3-prusaslicer SAME grams min, 61.2 g
prusa-mmu3-orca SAME 534 min, 146.8 g
prusa-xl5t-database-prusaslicer SAME grams min, 30.2 g
prusa-xl5t-orca SAME 100 min, 34.3 g
prusa-xl5t-prusaslicer SAME grams min, 29.5 g
prusaslicer-layout SAME tools (T0, T1, T2, T3)
u1-mixed-orca SAME 85 min, 36.9 g
u1-orca SAME 121 min, 34.2 g
x1c-bambu SAME 598 min, 159.4 g
x1c-orca SAME 486 min, 75.9 g
x1c-touching-orca SAME 196 min, 37.4 g
x2d-bambu SAME 419 min, 135.9 g
x2d-orca SAME 354 min, 65.5 g

If Filamatch saves you time: buy me a coffee.

Filamatch 0.8.0

Choose a tag to compare

@percosys percosys released this 08 Nov 16:46

Install

  1. Download Filamatch-0.8.0.zip below and unzip it (you get a Filamatch folder).
  2. Move the folder into Fusion's add-ins folder:
    • macOS: ~/Library/Application Support/Autodesk/Autodesk Fusion 360/API/AddIns/
    • Windows: %APPDATA%\Autodesk\Autodesk Fusion 360\API\AddIns\
  3. Restart Fusion. The Filamatch button is on the UTILITIES tab, ADD-INS panel.

Changes

New

  • Send to PrusaSlicer prepares the project (PrusaSlicer 2.9.7 or
    newer), as Send to Orca and Send to Bambu do:
    • Pick PrusaSlicer under Settings > Send to. Filamatch finds it by
      itself, also in its "Original Prusa Drivers" folder.
    • Print settings lists PrusaSlicer's own printers and prints: first
      My presets (PrusaSlicer) (the printers, prints and filaments you
      saved in PrusaSlicer yourself), then Prusa Research and the 31 other
      vendors PrusaSlicer ships. The list is read again each time you open
      Print settings, so a printer you just saved in PrusaSlicer is there.
    • The project gets the printer, the print, and a filament preset on
      every tool that fits the printer: the design's own filament, one made
      from the Open Filament Database, else the generic preset of its type.
      Each body is on its tool, in its colour.
    • The bodies sit together in the middle of the bed with their lowest
      point on it, and the wipe tower is placed beside them.
    • After sending, the palette shows the print time and the grams of each
      filament, with the spool check.
    • Filamatch works out which presets fit from PrusaSlicer's own rules and
      builds the settings in a settings folder of its own: your PrusaSlicer
      settings are not changed. (PrusaSlicer 2.9's command line takes a
      printer and filament preset by name but does not apply them.)
    • Save new filament presets in the slicer also works for PrusaSlicer.
  • Advanced > Reload slicer profiles (was "Reload Orca profiles")
    reloads the lists of whichever slicer you pick.

Fixed

  • The PrusaSlicer layout (Send to PrusaSlicer without preparing, and
    SuperSlicer) puts the bodies' lowest point on the bed: a design drawn
    below Fusion's origin was "Sinking" in PrusaSlicer.

Known limits

  • PrusaSlicer's own print time for MMU3 printers is sometimes broken
    ("2147483647d"). Filamatch slices again; when it stays broken, the
    palette shows only the grams.
  • Filamatch does not read loaded spools from Prusa printers yet.

What is tested: PrusaSlicer 2.9.7 on macOS: the command line for the
Prusa XL 5T, MK4 MMU3 and CORE One (prepare and estimate; these are cases
in the slicer test matrix), and a full send from Fusion to the PrusaSlicer
app with a printer preset of the owner's own (Bambu Lab H2D values: two
tools, 350 x 320 bed): printer, print, a filament per tool, each body on
its tool, on the bed, wipe tower beside it. Not tested: opening a project
for a Prusa printer in the PrusaSlicer app, Windows, SuperSlicer, and
printing.

Slicer test matrix

Slicer test matrix against v0.7.0: 1 changed, 4 fixed, 19 same.

Case Result Estimate
h2c-bambu SAME 299 min, 82.9 g
h2c-orca SAME 207 min, 33.3 g
h2d-bambu SAME 461 min, 139.6 g
h2d-database-bambu SAME 279 min, 77.1 g
h2d-database-orca SAME 121 min, 30.0 g
h2d-orca SAME 426 min, 103.7 g
h2d-touching-bambu SAME 92 min, 28.2 g
h2d-touching-orca SAME 91 min, 25.5 g
h3c-bambu SAME 76 min, 36.9 g
prusa-coreone-prusaslicer FIXED (before: Refusing unsafe remote profile path 'prusa:PrusaResearch.json') grams min, 3.8 g
prusa-indx4t-orca SAME 120 min, 20.3 g
prusa-mk4mmu3-prusaslicer FIXED (before: Refusing unsafe remote profile path 'prusa:PrusaResearch.json') grams min, 61.2 g
prusa-mmu3-orca SAME 534 min, 146.8 g
prusa-xl5t-database-prusaslicer FIXED (before: Refusing unsafe remote profile path 'prusa:PrusaResearch.json') grams min, 30.2 g
prusa-xl5t-orca SAME 100 min, 34.3 g
prusa-xl5t-prusaslicer FIXED (before: Refusing unsafe remote profile path 'prusa:PrusaResearch.json') grams min, 29.5 g
prusaslicer-layout CHANGED (settings: differ) tools (T0, T1, T2, T3)
u1-mixed-orca SAME 85 min, 36.9 g
u1-orca SAME 121 min, 34.2 g
x1c-bambu SAME 598 min, 159.4 g
x1c-orca SAME 486 min, 75.9 g
x1c-touching-orca SAME 196 min, 37.4 g
x2d-bambu SAME 419 min, 135.9 g
x2d-orca SAME 354 min, 65.5 g

If Filamatch saves you time: buy me a coffee.

Filamatch 0.7.0

Choose a tag to compare

@percosys percosys released this 08 Nov 15:51

Install

  1. Download Filamatch-0.7.0.zip below and unzip it (you get a Filamatch folder).
  2. Move the folder into Fusion's add-ins folder:
    • macOS: ~/Library/Application Support/Autodesk/Autodesk Fusion 360/API/AddIns/
    • Windows: %APPDATA%\Autodesk\Autodesk Fusion 360\API\AddIns\
  3. Restart Fusion. The Filamatch button is on the UTILITIES tab, ADD-INS panel.

Changes

Fixed

  • Bodies that touch now keep their exact places in a prepared project.
    The slicer's "assemble" step centred every body on its own middle, so a
    part could move: in a real design an inlay moved 1 mm up inside its body,
    and four cubes in a row ended up in one spot. Filamatch now joins touching
    bodies into one object with one part per body before the slicer runs, so
    every part stays where it is in Fusion and keeps its filament. Checked
    with OrcaSlicer 2.5 and Bambu Studio 2.9.1 (an inlay design and stacked
    test cubes). The inlay design was opened in Bambu Studio for a real H2D
    with no problem seen; not yet opened in OrcaSlicer.
  • A prepared project now uses the slicer preset of the spool that is
    loaded, not the one the design names. A design with Bambu ABS, sent to a
    slot with PolyLite ABS, gets "PolyLite ABS @bbl H2D", so Bambu Studio's
    sync window shows the same filament on both sides. Only when the spool is
    the same material type. Checked with the Bambu Studio 2.9.1 command line;
    not yet opened in the app.
  • The print estimate counts every plate. Bambu Studio puts bodies on plates
    of their own when one filament's bed is too hot for another (ABS at
    90 °C and PETG); the estimate showed only plate 1's time and weight but
    every plate's grams per filament ("3.6 g of filament (3.6 g + 3.0 g)").
    It now adds the plates up and says "on 2 plates". Checked with the Bambu
    Studio 2.9.1 and OrcaSlicer 2.5 command lines and seen working in Fusion.

New

  • The printer's nozzles. Filamatch reads the installed nozzles (size and,
    over the LAN connection, Standard or High Flow) and shows them under
    Print settings ("Printer nozzles: Left 0.4 mm High Flow · Right 0.4 mm
    High Flow"). The ready check warns when the printer settings are for
    another size and can switch to the right printer settings. A prepared
    project gets each nozzle's flow type, as Bambu Studio's printer sync
    does. Checked with a real H2D (two 0.4 High Flow nozzles, seen working in
    Fusion) and X1C over the LAN, and with the Bambu Studio 2.9.1 and
    OrcaSlicer 2.5 command lines (Bambu Studio slices with High Flow). Over
    Bambuddy only the size is known, so the flow type is left as the printer
    settings have it.
  • Slicer presets for filaments from the Open Filament Database. When the
    slicer has no preset for such a filament, Filamatch makes one from the
    slicer's generic preset for that type and printer, with the database's
    temperatures (the middle of a range), bed temperatures, fan speeds,
    fastest flow, flow ratio and brand, and the project carries it (for
    example "addnorth ABS rABS @bambu Lab H2D 0.4 nozzle" at 245 °C). Filaments
    added earlier get the data from the downloaded database. A new setting,
    Save new filament presets in the slicer (off by default), also saves
    it as your own preset in Bambu Studio or OrcaSlicer, never over one you
    have. A slicer preset counts as the filament only when it is the same
    brand, so a Voxel PETG gets its own "Voxel PLA PETG" preset, not Bambu
    PETG Basic. A spool set on the printer to a preset you made yourself (in
    either slicer) now gets that preset. Checked with the Bambu Studio 2.9.1
    and OrcaSlicer 2.5 command lines (prepare and estimate). A Voxel PETG
    from the database was sent from Fusion and opened in Bambu Studio with
    its own preset, and saving put it in Bambu Studio's and OrcaSlicer's
    user presets. Bambu Studio shows its usual "Customized Preset" note for a
    preset it does not ship; whether the note stays away once the preset is
    saved is not known. Not yet confirmed in the OrcaSlicer app.
  • On Home, a filament row says which filament is loaded when its slot holds
    another one than the design names ("≠ Loaded: PolyLite ABS"). Point at it
    for the details. Colours are not compared here: the two swatches show
    them. Checked in the palette's demo; not yet seen in Fusion.
  • Save printer report (Settings > Advanced): saves the connected
    printer's status as a JSON file with serial numbers, access codes, IP
    addresses, Wi-Fi names, keys and camera links removed, to attach to a
    printer-support issue. Checked with test data and in the palette's demo;
    not yet run against a real printer.
  • A bug-report form on GitHub, and docs/triage.md: how an
    issue becomes a fix and when a printer counts as tested.
  • For developers: a slicer test matrix (scripts/slicer_matrix.py) that
    prepares and estimates every supported printer with the real slicers,
    checks that touching parts stay in place, and compares the results with
    the last release (releases include its table); printer facts in one data
    file (Filamatch/data/printers.json) that also writes the README's
    printer tables; a linked development install
    (scripts/install_addin_macos.sh --dev); tests/run_all.py --changed.

What is tested: a real Bambu Lab H2D (two 0.4 High Flow nozzles, AMS 2
Pro, AMS HT) and X1 Carbon over the LAN; Fusion on macOS; Bambu Studio
2.9.1 and OrcaSlicer 2.5 (their command lines for every change, the Bambu
Studio app for the made preset and the inlay design); the slicer test
matrix against 0.6.1 (in the release notes). Not tested: Windows, a made
preset in the OrcaSlicer app, Save printer report from the palette on a
real printer, and printing.

Slicer test matrix

Slicer test matrix against v0.6.1: 2 changed, 3 fixed, 15 same.

Case Result Estimate
h2c-bambu SAME 299 min, 82.9 g
h2c-orca SAME 207 min, 33.3 g
h2d-bambu SAME 461 min, 139.6 g
h2d-database-bambu CHANGED (settings: compatible_machine_expression_group, eng_plate_temp, eng_plate_temp_in) 279 min, 77.1 g
h2d-database-orca CHANGED (settings: compatible_machine_expression_group, eng_plate_temp, eng_plate_temp_in) 121 min, 30.0 g
h2d-orca SAME 426 min, 103.7 g
h2d-touching-bambu FIXED (before: parts moved up to 40.0 mm against the export) 92 min, 28.2 g
h2d-touching-orca FIXED (before: parts moved up to 40.0 mm against the export) 91 min, 25.5 g
h3c-bambu SAME 76 min, 36.9 g
prusa-indx4t-orca SAME 120 min, 20.3 g
prusa-mmu3-orca SAME 534 min, 146.8 g
prusa-xl5t-orca SAME 100 min, 34.3 g
prusaslicer-layout SAME tools (T0, T1, T2, T3)
u1-mixed-orca SAME 85 min, 36.9 g
u1-orca SAME 121 min, 34.2 g
x1c-bambu SAME 598 min, 159.4 g
x1c-orca SAME 486 min, 75.9 g
x1c-touching-orca FIXED (before: parts moved up to 40.0 mm against the export) 196 min, 37.4 g
x2d-bambu SAME 419 min, 135.9 g
x2d-orca SAME 354 min, 65.5 g

If Filamatch saves you time: buy me a coffee.

Filamatch 0.6.1

Choose a tag to compare

@percosys percosys released this 08 Nov 04:28

Install

  1. Download Filamatch-0.6.1.zip below and unzip it (you get a Filamatch folder).
  2. Move the folder into Fusion's add-ins folder:
    • macOS: ~/Library/Application Support/Autodesk/Autodesk Fusion 360/API/AddIns/
    • Windows: %APPDATA%\Autodesk\Autodesk Fusion 360\API\AddIns\
  3. Restart Fusion. The Filamatch button is on the UTILITIES tab, ADD-INS panel.

Changes

New

  • Snapmaker U1 through OrcaSlicer: Send to Orca prepares the project with
    each body on its tool, and the estimate works, for the 0.4 nozzle set and
    the mixed 0.4 + 0.6 set. The 0.4 set gets Snapmaker's own filament
    presets; the mixed set gets OrcaSlicer's generic presets, because
    Snapmaker's presets list only the 0.4 U1.

Fixed

  • Printers with mixed nozzle sizes: OrcaSlicer 2.5 refused them ("Bridge
    line width must not exceed nozzle diameter"), because it works out its
    default bridge width from the largest nozzle but checks it against the
    smallest. Filamatch sets the bridge width to the smallest nozzle.

What is tested: checked with OrcaSlicer 2.5's command line only (the
four-cube test file: prepare, then slice for the estimate). Not tested:
opening the U1 projects in the OrcaSlicer app, the Snapmaker Orca app,
reading the U1's loaded spools, and printing.

Nothing else changed: the same eleven printer and slicer cases as in
0.6.0 (Bambu Lab H2D, X1 Carbon, H2C, H3C and X2D in Bambu Studio 2.9.1 and
OrcaSlicer 2.5; Prusa XL 5T, CORE One INDX 4T, MK4 MMU3 and the U1 with
0.4 nozzles in OrcaSlicer 2.5) give the same project settings and the same
estimates with 0.6.0 and 0.6.1. In both versions OrcaSlicer refuses the
estimate for PLA with PETG on one nozzle (X1 Carbon, MK4 MMU3), as it
should. Only the mixed-nozzle U1 is new.

If Filamatch saves you time: buy me a coffee.

Filamatch 0.6.0

Choose a tag to compare

@percosys percosys released this 08 Nov 03:56

Install

  1. Download Filamatch-0.6.0.zip below and unzip it (you get a Filamatch folder).
  2. Move the folder into Fusion's add-ins folder:
    • macOS: ~/Library/Application Support/Autodesk/Autodesk Fusion 360/API/AddIns/
    • Windows: %APPDATA%\Autodesk\Autodesk Fusion 360\API\AddIns\
  3. Restart Fusion. The Filamatch button is on the UTILITIES tab, ADD-INS panel.

Changes

New

  • Bambu Lab H2C, H3C and X2D: Send to Bambu prepares the project, and the
    print time and filament estimate works. The estimate copy counts every
    hotend of a nozzle rack (H2C: 1 + 6, H3C: 9). On the H2C and X2D each
    filament goes to the side its AMS feeds; on the H3C the slicer chooses
    the hotend.
  • Prusa XL 5T, CORE One INDX (4T, 8T) and CORE One MMU3 through
    OrcaSlicer: each body stays on its tool, with Prusa's own filament
    presets, and the estimate works.
  • Send to PrusaSlicer keeps the slots. PrusaSlicer and SuperSlicer get
    the file in their own layout, with each body on its extruder; bodies that
    touch become one object with one part per body. Your PrusaSlicer printer
    and filament settings are not changed.
  • A filament is not pinned to a nozzle that cannot print it (the H2C's left
    nozzle prints no TPU); the slicer then chooses.
  • OrcaSlicer with a Bambu Lab H3C is refused with a reason: OrcaSlicer 2.5
    cannot slice the H3C. Choose Bambu Studio 2.9.1 or newer.
  • README: a list of tested printers, and a
    printer support form
    for owners of other printers. The plan for these printers is in
    docs/design/multi-nozzle.md.

Fixed

  • The prime tower is placed with its brim and rib walls counted, and a
    turned tower (Prusa XL presets) is placed the right way. Before, Bambu
    Studio refused the X2D ("G-code outside of the printable area") and
    OrcaSlicer refused the Prusa XL ("Prime tower is partially outside").
  • Printers from OrcaSlicer's online profiles (Prusa and the other vendors)
    get the vendor's own filament presets, for example "Prusament PLA @XL" or
    "Generic PETG @prusa CORE One INDX". Before, they got Bambu Studio's
    presets, and OrcaSlicer showed other presets instead ("Voron Generic ABS"
    on a Prusa XL). Another brand's filament gets the vendor's Generic preset.
  • When the print estimate fails, the palette shows the slicer's own reason,
    for example "Selected nozzle temperatures are incompatible" (PLA and PETG
    on one MMU3 nozzle). A slicer crash is retried twice.

What is tested in this release

None of the new printers was tested on a real printer. Everything below
was checked on macOS with a test file of four cubes, one filament each.

Printer or slicer Checked in the slicer app Checked with the slicer's command line
Bambu Lab H2C Bambu Studio 2.9.1: opens with Filamatch's nozzle choice ("Custom" grouping), slices (4 h 48 min, 79.5 g) Prepare and estimate in Bambu Studio 2.9.1 and OrcaSlicer 2.5
Bambu Lab H3C Bambu Studio 2.9.1: opens with its 9 nozzles, slices (1 h 10 min, 29.5 g) Prepare and estimate in Bambu Studio 2.9.1; OrcaSlicer is refused
Bambu Lab X2D Bambu Studio 2.9.1: opens with Filamatch's nozzle choice; not sliced in the app Prepare and estimate in Bambu Studio 2.9.1 and OrcaSlicer 2.5
Prusa XL 5T OrcaSlicer 2.5: opens with Prusament presets, slices (1 h 41 min, 35.1 g, same as the estimate) Prepare and estimate in OrcaSlicer 2.5
Prusa CORE One INDX 4T / 8T Not opened in the app Prepare and estimate in OrcaSlicer 2.5; the 8T estimate often fails because OrcaSlicer crashes
Prusa CORE One MMU3 Not opened in the app Prepare and estimate in OrcaSlicer 2.5 with PLA only; PLA with PETG is refused by the slicer, as it should be
PrusaSlicer layout PrusaSlicer 2.6.0: one object with its four parts in place PrusaSlicer 2.6.0 slices with tools T0 to T3

Not tested yet:

  • Reading the loaded spools of the H2C, H3C and X2D (LAN-only mode or
    Bambuddy), printing on any of the new printers, and the spool check on
    them.
  • The X2D's slot labels: Bambu Studio calls its nozzles "Main" and
    "Auxiliary"; the palette may show "(L)" and "(R)" the wrong way round.
    The nozzle choice itself follows the printer's own extruder numbers.
  • PrusaSlicer 2.9 and SuperSlicer; filament presets of online vendors other
    than Prusa; the new features on Windows.

Unchanged and still validated on real printers: the Bambu Lab H2D (full
flow) and the X1 Carbon (loaded spools). Their prepared projects and
presets are the same as in 0.5.1.

If Filamatch saves you time: buy me a coffee.

Filamatch 0.5.1

Choose a tag to compare

@percosys percosys released this 08 Nov 02:21

Install

  1. Download Filamatch-0.5.1.zip below and unzip it (you get a Filamatch folder).
  2. Move the folder into Fusion's add-ins folder:
    • macOS: ~/Library/Application Support/Autodesk/Autodesk Fusion 360/API/AddIns/
    • Windows: %APPDATA%\Autodesk\Autodesk Fusion 360\API\AddIns\
  3. Restart Fusion. The Filamatch button is on the UTILITIES tab, ADD-INS panel.

Changes

New

  • Print time and filament after sending: once the slicer has opened,
    Filamatch slices a copy in the background and shows, under the send
    button, for example "About 43 min and 6.9 g of filament (2.6 g + 4.3 g)".
    Your file is not changed. On a Bambu Lab H2D the copy names each nozzle,
    which the slicer otherwise reads from the printer.
  • Spool check: with the estimate, each filament is compared with the grams
    left on its spool (Bambuddy, or the printer for Bambu RFID spools). A
    warning shows when a spool has less than the estimate plus 10%.
  • Several spools of the same filament: Filamatch picks the fullest one, and
    the spool check counts the others as backups. It reads the printer's AMS
    auto refill setting and warns when the print needs a backup spool but
    auto refill is off.
  • Settings > Export: turn the print estimate and spool check off on a slow
    computer. The background slice takes about 1 to 5 seconds on an M4 Mac.

Fixed

  • The exact filament type: a filament such as Bambu ABS-GF was written as
    plain "ABS", because the type came from the catalog. The preset's own type
    is now kept when it is the same filament or a variant of it ("ABS-GF" for
    "ABS"), so the slicer and the printer match AMS slots by the right type.

If Filamatch saves you time: buy me a coffee.

Filamatch 0.5.0

Choose a tag to compare

@percosys percosys released this 08 Nov 01:04

Install

  1. Download Filamatch-0.5.0.zip below and unzip it (you get a Filamatch folder).
  2. Move the folder into Fusion's add-ins folder:
    • macOS: ~/Library/Application Support/Autodesk/Autodesk Fusion 360/API/AddIns/
    • Windows: %APPDATA%\Autodesk\Autodesk Fusion 360\API\AddIns\
  3. Restart Fusion. The Filamatch button is on the UTILITIES tab, ADD-INS panel.

Changes

New

  • The send button names the slicer you pick: Send to Orca, Send to
    Bambu
    , Send to PrusaSlicer. Settings > Connections > Change lists the
    installed slicers. Other slicers get the plain 3MF, because they cannot
    open prepared projects.
  • Bambu Studio prepares projects by itself: OrcaSlicer is no longer needed
    to send a Bambu Lab printer's project to Bambu Studio. The file carries
    your own Bambu Studio version and opens without the "Some values have been
    replaced" notice. For printers outside Bambu Studio's own list, OrcaSlicer
    prepares the project and Filamatch writes Bambu Studio's words for the 4
    settings that OrcaSlicer words its own way.
  • Slot check: after every export, Filamatch checks that each body uses the
    slot and the colour that it has in Fusion. If one does not, the export
    stops before the slicer opens, and the message names the body and the slot.
  • Printers with two nozzles (Bambu Lab H2D): each filament now uses the
    nozzle that its AMS slot feeds. Before, the slicer chose the nozzles
    itself ("Auto For Flush") and could put a filament on the other nozzle.
    When a slot's nozzle is not known (for example an AMS on a filament track
    switch), the slicer still chooses. Tested in Bambu Studio 2.9.1; OrcaSlicer
    2.5 keeps the choice.

Fixed

  • Purge volumes fit the real filament colours. The slicer works out the
    purge volumes from the filament presets' colours; Bambu Studio's presets
    have none, so OrcaSlicer used placeholder colours (orange and white) and
    Filamatch set the real colours afterwards. Each filament preset now
    carries its colour (black to green: 591 mm³ instead of 525).
  • Send to Orca works again after an update to Bambu Studio 2.9. OrcaSlicer
    2.5 refused the printer and filament presets of Bambu Studio 2.9 ("Vendor
    bundle contains invalid presets"). Filamatch now merges each Bambu Studio
    preset with its parent presets and gives OrcaSlicer the merged copy.
  • Bambu Studio 2.9 showed both H2D nozzles as "High Flow" in a Send to Orca
    file. Each nozzle now gets its own flow type ("Standard" by default).

Docs

  • The user guide, How it works and the README describe the slicer choice,
    who prepares the project, and the new checks. Tested on macOS with
    OrcaSlicer 2.5 and Bambu Studio 2.9.1 on a Bambu Lab H2D.

If Filamatch saves you time: buy me a coffee.