Repository navigation
Filamatch 0.5.0
Install
- Download Filamatch-0.5.0.zip below and unzip it (you get a
Filamatchfolder). - Move the folder into Fusion's add-ins folder:
- macOS:
~/Library/Application Support/Autodesk/Autodesk Fusion 360/API/AddIns/ - Windows:
%APPDATA%\Autodesk\Autodesk Fusion 360\API\AddIns\
- macOS:
- Restart Fusion. The Filamatch button is on the UTILITIES tab, ADD-INS panel.
Changes
New
- The send button names the slicer you pick: Send to Orca, Send to
Bambu, Send to PrusaSlicer. Settings > Connections > Change lists the
installed slicers. Other slicers get the plain 3MF, because they cannot
open prepared projects. - Bambu Studio prepares projects by itself: OrcaSlicer is no longer needed
to send a Bambu Lab printer's project to Bambu Studio. The file carries
your own Bambu Studio version and opens without the "Some values have been
replaced" notice. For printers outside Bambu Studio's own list, OrcaSlicer
prepares the project and Filamatch writes Bambu Studio's words for the 4
settings that OrcaSlicer words its own way. - Slot check: after every export, Filamatch checks that each body uses the
slot and the colour that it has in Fusion. If one does not, the export
stops before the slicer opens, and the message names the body and the slot. - Printers with two nozzles (Bambu Lab H2D): each filament now uses the
nozzle that its AMS slot feeds. Before, the slicer chose the nozzles
itself ("Auto For Flush") and could put a filament on the other nozzle.
When a slot's nozzle is not known (for example an AMS on a filament track
switch), the slicer still chooses. Tested in Bambu Studio 2.9.1; OrcaSlicer
2.5 keeps the choice.
Fixed
- Purge volumes fit the real filament colours. The slicer works out the
purge volumes from the filament presets' colours; Bambu Studio's presets
have none, so OrcaSlicer used placeholder colours (orange and white) and
Filamatch set the real colours afterwards. Each filament preset now
carries its colour (black to green: 591 mm³ instead of 525). - Send to Orca works again after an update to Bambu Studio 2.9. OrcaSlicer
2.5 refused the printer and filament presets of Bambu Studio 2.9 ("Vendor
bundle contains invalid presets"). Filamatch now merges each Bambu Studio
preset with its parent presets and gives OrcaSlicer the merged copy. - Bambu Studio 2.9 showed both H2D nozzles as "High Flow" in a Send to Orca
file. Each nozzle now gets its own flow type ("Standard" by default).
Docs
- The user guide, How it works and the README describe the slicer choice,
who prepares the project, and the new checks. Tested on macOS with
OrcaSlicer 2.5 and Bambu Studio 2.9.1 on a Bambu Lab H2D.
If Filamatch saves you time: buy me a coffee.