Repository navigation
Filamatch 0.5.1
Install
- Download Filamatch-0.5.1.zip below and unzip it (you get a
Filamatchfolder). - Move the folder into Fusion's add-ins folder:
- macOS:
~/Library/Application Support/Autodesk/Autodesk Fusion 360/API/AddIns/ - Windows:
%APPDATA%\Autodesk\Autodesk Fusion 360\API\AddIns\
- macOS:
- Restart Fusion. The Filamatch button is on the UTILITIES tab, ADD-INS panel.
Changes
New
- Print time and filament after sending: once the slicer has opened,
Filamatch slices a copy in the background and shows, under the send
button, for example "About 43 min and 6.9 g of filament (2.6 g + 4.3 g)".
Your file is not changed. On a Bambu Lab H2D the copy names each nozzle,
which the slicer otherwise reads from the printer. - Spool check: with the estimate, each filament is compared with the grams
left on its spool (Bambuddy, or the printer for Bambu RFID spools). A
warning shows when a spool has less than the estimate plus 10%. - Several spools of the same filament: Filamatch picks the fullest one, and
the spool check counts the others as backups. It reads the printer's AMS
auto refill setting and warns when the print needs a backup spool but
auto refill is off. - Settings > Export: turn the print estimate and spool check off on a slow
computer. The background slice takes about 1 to 5 seconds on an M4 Mac.
Fixed
- The exact filament type: a filament such as Bambu ABS-GF was written as
plain "ABS", because the type came from the catalog. The preset's own type
is now kept when it is the same filament or a variant of it ("ABS-GF" for
"ABS"), so the slicer and the printer match AMS slots by the right type.
If Filamatch saves you time: buy me a coffee.