Repository navigation
Filamatch 0.6.1
Install
- Download Filamatch-0.6.1.zip below and unzip it (you get a
Filamatchfolder). - Move the folder into Fusion's add-ins folder:
- macOS:
~/Library/Application Support/Autodesk/Autodesk Fusion 360/API/AddIns/ - Windows:
%APPDATA%\Autodesk\Autodesk Fusion 360\API\AddIns\
- macOS:
- Restart Fusion. The Filamatch button is on the UTILITIES tab, ADD-INS panel.
Changes
New
- Snapmaker U1 through OrcaSlicer: Send to Orca prepares the project with
each body on its tool, and the estimate works, for the 0.4 nozzle set and
the mixed 0.4 + 0.6 set. The 0.4 set gets Snapmaker's own filament
presets; the mixed set gets OrcaSlicer's generic presets, because
Snapmaker's presets list only the 0.4 U1.
Fixed
- Printers with mixed nozzle sizes: OrcaSlicer 2.5 refused them ("Bridge
line width must not exceed nozzle diameter"), because it works out its
default bridge width from the largest nozzle but checks it against the
smallest. Filamatch sets the bridge width to the smallest nozzle.
What is tested: checked with OrcaSlicer 2.5's command line only (the
four-cube test file: prepare, then slice for the estimate). Not tested:
opening the U1 projects in the OrcaSlicer app, the Snapmaker Orca app,
reading the U1's loaded spools, and printing.
Nothing else changed: the same eleven printer and slicer cases as in
0.6.0 (Bambu Lab H2D, X1 Carbon, H2C, H3C and X2D in Bambu Studio 2.9.1 and
OrcaSlicer 2.5; Prusa XL 5T, CORE One INDX 4T, MK4 MMU3 and the U1 with
0.4 nozzles in OrcaSlicer 2.5) give the same project settings and the same
estimates with 0.6.0 and 0.6.1. In both versions OrcaSlicer refuses the
estimate for PLA with PETG on one nozzle (X1 Carbon, MK4 MMU3), as it
should. Only the mixed-nozzle U1 is new.
If Filamatch saves you time: buy me a coffee.