Skip to content

Filamatch 0.7.0

Choose a tag to compare

@percosys percosys released this 08 Nov 15:51
· 6 commits to main since this release

Install

  1. Download Filamatch-0.7.0.zip below and unzip it (you get a Filamatch folder).
  2. Move the folder into Fusion's add-ins folder:
    • macOS: ~/Library/Application Support/Autodesk/Autodesk Fusion 360/API/AddIns/
    • Windows: %APPDATA%\Autodesk\Autodesk Fusion 360\API\AddIns\
  3. Restart Fusion. The Filamatch button is on the UTILITIES tab, ADD-INS panel.

Changes

Fixed

  • Bodies that touch now keep their exact places in a prepared project.
    The slicer's "assemble" step centred every body on its own middle, so a
    part could move: in a real design an inlay moved 1 mm up inside its body,
    and four cubes in a row ended up in one spot. Filamatch now joins touching
    bodies into one object with one part per body before the slicer runs, so
    every part stays where it is in Fusion and keeps its filament. Checked
    with OrcaSlicer 2.5 and Bambu Studio 2.9.1 (an inlay design and stacked
    test cubes). The inlay design was opened in Bambu Studio for a real H2D
    with no problem seen; not yet opened in OrcaSlicer.
  • A prepared project now uses the slicer preset of the spool that is
    loaded, not the one the design names. A design with Bambu ABS, sent to a
    slot with PolyLite ABS, gets "PolyLite ABS @bbl H2D", so Bambu Studio's
    sync window shows the same filament on both sides. Only when the spool is
    the same material type. Checked with the Bambu Studio 2.9.1 command line;
    not yet opened in the app.
  • The print estimate counts every plate. Bambu Studio puts bodies on plates
    of their own when one filament's bed is too hot for another (ABS at
    90 °C and PETG); the estimate showed only plate 1's time and weight but
    every plate's grams per filament ("3.6 g of filament (3.6 g + 3.0 g)").
    It now adds the plates up and says "on 2 plates". Checked with the Bambu
    Studio 2.9.1 and OrcaSlicer 2.5 command lines and seen working in Fusion.

New

  • The printer's nozzles. Filamatch reads the installed nozzles (size and,
    over the LAN connection, Standard or High Flow) and shows them under
    Print settings ("Printer nozzles: Left 0.4 mm High Flow · Right 0.4 mm
    High Flow"). The ready check warns when the printer settings are for
    another size and can switch to the right printer settings. A prepared
    project gets each nozzle's flow type, as Bambu Studio's printer sync
    does. Checked with a real H2D (two 0.4 High Flow nozzles, seen working in
    Fusion) and X1C over the LAN, and with the Bambu Studio 2.9.1 and
    OrcaSlicer 2.5 command lines (Bambu Studio slices with High Flow). Over
    Bambuddy only the size is known, so the flow type is left as the printer
    settings have it.
  • Slicer presets for filaments from the Open Filament Database. When the
    slicer has no preset for such a filament, Filamatch makes one from the
    slicer's generic preset for that type and printer, with the database's
    temperatures (the middle of a range), bed temperatures, fan speeds,
    fastest flow, flow ratio and brand, and the project carries it (for
    example "addnorth ABS rABS @bambu Lab H2D 0.4 nozzle" at 245 °C). Filaments
    added earlier get the data from the downloaded database. A new setting,
    Save new filament presets in the slicer (off by default), also saves
    it as your own preset in Bambu Studio or OrcaSlicer, never over one you
    have. A slicer preset counts as the filament only when it is the same
    brand, so a Voxel PETG gets its own "Voxel PLA PETG" preset, not Bambu
    PETG Basic. A spool set on the printer to a preset you made yourself (in
    either slicer) now gets that preset. Checked with the Bambu Studio 2.9.1
    and OrcaSlicer 2.5 command lines (prepare and estimate). A Voxel PETG
    from the database was sent from Fusion and opened in Bambu Studio with
    its own preset, and saving put it in Bambu Studio's and OrcaSlicer's
    user presets. Bambu Studio shows its usual "Customized Preset" note for a
    preset it does not ship; whether the note stays away once the preset is
    saved is not known. Not yet confirmed in the OrcaSlicer app.
  • On Home, a filament row says which filament is loaded when its slot holds
    another one than the design names ("≠ Loaded: PolyLite ABS"). Point at it
    for the details. Colours are not compared here: the two swatches show
    them. Checked in the palette's demo; not yet seen in Fusion.
  • Save printer report (Settings > Advanced): saves the connected
    printer's status as a JSON file with serial numbers, access codes, IP
    addresses, Wi-Fi names, keys and camera links removed, to attach to a
    printer-support issue. Checked with test data and in the palette's demo;
    not yet run against a real printer.
  • A bug-report form on GitHub, and docs/triage.md: how an
    issue becomes a fix and when a printer counts as tested.
  • For developers: a slicer test matrix (scripts/slicer_matrix.py) that
    prepares and estimates every supported printer with the real slicers,
    checks that touching parts stay in place, and compares the results with
    the last release (releases include its table); printer facts in one data
    file (Filamatch/data/printers.json) that also writes the README's
    printer tables; a linked development install
    (scripts/install_addin_macos.sh --dev); tests/run_all.py --changed.

What is tested: a real Bambu Lab H2D (two 0.4 High Flow nozzles, AMS 2
Pro, AMS HT) and X1 Carbon over the LAN; Fusion on macOS; Bambu Studio
2.9.1 and OrcaSlicer 2.5 (their command lines for every change, the Bambu
Studio app for the made preset and the inlay design); the slicer test
matrix against 0.6.1 (in the release notes). Not tested: Windows, a made
preset in the OrcaSlicer app, Save printer report from the palette on a
real printer, and printing.

Slicer test matrix

Slicer test matrix against v0.6.1: 2 changed, 3 fixed, 15 same.

Case Result Estimate
h2c-bambu SAME 299 min, 82.9 g
h2c-orca SAME 207 min, 33.3 g
h2d-bambu SAME 461 min, 139.6 g
h2d-database-bambu CHANGED (settings: compatible_machine_expression_group, eng_plate_temp, eng_plate_temp_in) 279 min, 77.1 g
h2d-database-orca CHANGED (settings: compatible_machine_expression_group, eng_plate_temp, eng_plate_temp_in) 121 min, 30.0 g
h2d-orca SAME 426 min, 103.7 g
h2d-touching-bambu FIXED (before: parts moved up to 40.0 mm against the export) 92 min, 28.2 g
h2d-touching-orca FIXED (before: parts moved up to 40.0 mm against the export) 91 min, 25.5 g
h3c-bambu SAME 76 min, 36.9 g
prusa-indx4t-orca SAME 120 min, 20.3 g
prusa-mmu3-orca SAME 534 min, 146.8 g
prusa-xl5t-orca SAME 100 min, 34.3 g
prusaslicer-layout SAME tools (T0, T1, T2, T3)
u1-mixed-orca SAME 85 min, 36.9 g
u1-orca SAME 121 min, 34.2 g
x1c-bambu SAME 598 min, 159.4 g
x1c-orca SAME 486 min, 75.9 g
x1c-touching-orca FIXED (before: parts moved up to 40.0 mm against the export) 196 min, 37.4 g
x2d-bambu SAME 419 min, 135.9 g
x2d-orca SAME 354 min, 65.5 g

If Filamatch saves you time: buy me a coffee.