Skip to content

Filamatch 0.8.0

Choose a tag to compare

@percosys percosys released this 08 Nov 16:46
· 5 commits to main since this release

Install

  1. Download Filamatch-0.8.0.zip below and unzip it (you get a Filamatch folder).
  2. Move the folder into Fusion's add-ins folder:
    • macOS: ~/Library/Application Support/Autodesk/Autodesk Fusion 360/API/AddIns/
    • Windows: %APPDATA%\Autodesk\Autodesk Fusion 360\API\AddIns\
  3. Restart Fusion. The Filamatch button is on the UTILITIES tab, ADD-INS panel.

Changes

New

  • Send to PrusaSlicer prepares the project (PrusaSlicer 2.9.7 or
    newer), as Send to Orca and Send to Bambu do:
    • Pick PrusaSlicer under Settings > Send to. Filamatch finds it by
      itself, also in its "Original Prusa Drivers" folder.
    • Print settings lists PrusaSlicer's own printers and prints: first
      My presets (PrusaSlicer) (the printers, prints and filaments you
      saved in PrusaSlicer yourself), then Prusa Research and the 31 other
      vendors PrusaSlicer ships. The list is read again each time you open
      Print settings, so a printer you just saved in PrusaSlicer is there.
    • The project gets the printer, the print, and a filament preset on
      every tool that fits the printer: the design's own filament, one made
      from the Open Filament Database, else the generic preset of its type.
      Each body is on its tool, in its colour.
    • The bodies sit together in the middle of the bed with their lowest
      point on it, and the wipe tower is placed beside them.
    • After sending, the palette shows the print time and the grams of each
      filament, with the spool check.
    • Filamatch works out which presets fit from PrusaSlicer's own rules and
      builds the settings in a settings folder of its own: your PrusaSlicer
      settings are not changed. (PrusaSlicer 2.9's command line takes a
      printer and filament preset by name but does not apply them.)
    • Save new filament presets in the slicer also works for PrusaSlicer.
  • Advanced > Reload slicer profiles (was "Reload Orca profiles")
    reloads the lists of whichever slicer you pick.

Fixed

  • The PrusaSlicer layout (Send to PrusaSlicer without preparing, and
    SuperSlicer) puts the bodies' lowest point on the bed: a design drawn
    below Fusion's origin was "Sinking" in PrusaSlicer.

Known limits

  • PrusaSlicer's own print time for MMU3 printers is sometimes broken
    ("2147483647d"). Filamatch slices again; when it stays broken, the
    palette shows only the grams.
  • Filamatch does not read loaded spools from Prusa printers yet.

What is tested: PrusaSlicer 2.9.7 on macOS: the command line for the
Prusa XL 5T, MK4 MMU3 and CORE One (prepare and estimate; these are cases
in the slicer test matrix), and a full send from Fusion to the PrusaSlicer
app with a printer preset of the owner's own (Bambu Lab H2D values: two
tools, 350 x 320 bed): printer, print, a filament per tool, each body on
its tool, on the bed, wipe tower beside it. Not tested: opening a project
for a Prusa printer in the PrusaSlicer app, Windows, SuperSlicer, and
printing.

Slicer test matrix

Slicer test matrix against v0.7.0: 1 changed, 4 fixed, 19 same.

Case Result Estimate
h2c-bambu SAME 299 min, 82.9 g
h2c-orca SAME 207 min, 33.3 g
h2d-bambu SAME 461 min, 139.6 g
h2d-database-bambu SAME 279 min, 77.1 g
h2d-database-orca SAME 121 min, 30.0 g
h2d-orca SAME 426 min, 103.7 g
h2d-touching-bambu SAME 92 min, 28.2 g
h2d-touching-orca SAME 91 min, 25.5 g
h3c-bambu SAME 76 min, 36.9 g
prusa-coreone-prusaslicer FIXED (before: Refusing unsafe remote profile path 'prusa:PrusaResearch.json') grams min, 3.8 g
prusa-indx4t-orca SAME 120 min, 20.3 g
prusa-mk4mmu3-prusaslicer FIXED (before: Refusing unsafe remote profile path 'prusa:PrusaResearch.json') grams min, 61.2 g
prusa-mmu3-orca SAME 534 min, 146.8 g
prusa-xl5t-database-prusaslicer FIXED (before: Refusing unsafe remote profile path 'prusa:PrusaResearch.json') grams min, 30.2 g
prusa-xl5t-orca SAME 100 min, 34.3 g
prusa-xl5t-prusaslicer FIXED (before: Refusing unsafe remote profile path 'prusa:PrusaResearch.json') grams min, 29.5 g
prusaslicer-layout CHANGED (settings: differ) tools (T0, T1, T2, T3)
u1-mixed-orca SAME 85 min, 36.9 g
u1-orca SAME 121 min, 34.2 g
x1c-bambu SAME 598 min, 159.4 g
x1c-orca SAME 486 min, 75.9 g
x1c-touching-orca SAME 196 min, 37.4 g
x2d-bambu SAME 419 min, 135.9 g
x2d-orca SAME 354 min, 65.5 g

If Filamatch saves you time: buy me a coffee.