Skip to content

Filamatch 0.9.0

Choose a tag to compare

@percosys percosys released this 08 Nov 22:36
· 4 commits to main since this release

Install

  1. Download Filamatch-0.9.0.zip below and unzip it (you get a Filamatch folder).
  2. Move the folder into Fusion's add-ins folder:
    • macOS: ~/Library/Application Support/Autodesk/Autodesk Fusion 360/API/AddIns/
    • Windows: %APPDATA%\Autodesk\Autodesk Fusion 360\API\AddIns\
  3. Restart Fusion. The Filamatch button is on the UTILITIES tab, ADD-INS panel.

Changes

New

  • Printed weight and strength. A new card on Home, above the send
    button, estimates what each filament body weighs as printed: walls, top
    and bottom layers and infill from the print settings (a body's own
    settings count). Check with the slicer slices each body once with
    OrcaSlicer or Bambu Studio for its exact grams.
    • The switch Fusion uses the printed values (off until you turn it
      on, kept per design) gives each body its own "… · as printed" copy of
      its filament, with the printed density, stiffness and strength. Fusion's
      mass, Physical Properties and Simulation then use them. A copy follows
      when its body's settings change. Turning the switch off puts the
      filaments back and removes the copies from the design.
    • Stiffness and strength come from the filament's own data sheet when
      Filamatch has it (Bambu Lab and Polymaker engineering filaments, see
      below), else from generic values for its type (the median of 29 data
      sheets from 6 makers). Choose Safe (across the layers, the weakest
      direction; moist values for a nylon whose sheet has them) or
      Typical. Fusion Simulation takes one value for every direction.
    • Where the values come from names each data sheet. These are rough
      estimates (±25 % from a data sheet, ±25–40 % generic), never design
      values: check important parts with a test print.
  • Filament data sheets. Filamatch/data/datasheets/ has the makers'
    printed-part values for 16 Bambu Lab and 23 Polymaker engineering
    filaments: stiffness, strength, elongation, bending, impact and heat
    values along and across the layers, with the test standard, how the test
    bars were printed, and a link to each maker's data sheet. The folder's
    README has the table. Errors on a sheet are named in its notes, not
    used.
  • Design check. The ready check above the send button also warns:
    • when the design uses more filaments than the printer has slots (all
      AMS and external slots of a connected printer) or, without a printer,
      than the PrusaSlicer printer has tools;
    • when filaments cannot share one bed: a hot filament (ABS, ASA, PC, PA,
      fibre-filled ones) with a cool one (PLA, PETG, TPU, PVA). The groups are
      Bambu Studio's own; the message gives each type's bed temperature;
    • when a carbon or glass fibre filament (CF, GF) would print with a
      stainless steel or brass nozzle. The direct LAN connection and Bambuddy
      now read the nozzle material from the printer;
    • when a filament's bodies are thinner than the nozzle (about; measured
      across, so a thin colour layer on top does not count).
      Each warning has Show, which selects the bodies in Fusion.
  • Click a filament's name to select its bodies in Fusion.
  • Use it next to "≠ Loaded: …" gives the bodies the loaded spool's
    filament in one click. The filament is added to Fusion like an import
    from the printer, and the slot stays chosen.
  • Print settings per body. Each filament row has an arrow (›); open it
    to see the filament's bodies (with
    their component, "Body1 in TEF", so two bodies with one name are told
    apart). Edit gives one body, or all bodies of the filament, their own
    infill %, infill type, walls, top and bottom layers. Empty fields show the
    print process's value in grey ("15% (process)"). The settings stay on the
    bodies in the design; Bambu Studio, OrcaSlicer and PrusaSlicer get them as
    the body's own settings. The filament row shows "⚙" when some of its
    bodies have their own settings.
  • Infill type lists the types the chosen slicer has. Filamatch asks
    each slicer once per version: PrusaSlicer lists them in its help; Bambu
    Studio and OrcaSlicer keep only the type names they know when they load a
    3MF. A type with another name in another slicer is renamed ("zig-zag" in
    Bambu Studio is "rectilinear" in OrcaSlicer and PrusaSlicer); a type the
    slicer does not have at all is named in the ready check.
  • Supports are left to the slicer: they depend on how the part sits on the
    bed, and the slicers paint them where they are needed.
  • Filament cost in the print estimate, for example "filament cost about
    $0.30". It is each filament's grams at the price per kg in its slicer
    preset (PrusaSlicer works it out itself). Set the currency symbol under
    Settings > Export; set the prices in the slicer to what you pay.
  • A copy of a Filamatch filament (for example a body's "as printed" copy,
    with the printed density) stays that filament: same row, slot, colour and
    slicer preset, and the filament's own density in the slicer. The copy
    names its source in its description (filamatch_source=<name>).

Changed

  • Colour matching compares colours the way people see them (CIEDE2000)
    instead of by RGB distance. Two shades of green now count as close, and a
    grey no longer counts as close to a colour. The matches on a real H2D
    with eight spools stayed the same.

Fixed

  • An empty design (no bodies yet) no longer writes an error to the log.
  • The palette no longer gets stuck on the sample data ("Preview with
    sample data") when Fusion is slow to connect it, for example right after
    the add-in starts. It waits up to 3 seconds, and connects later when
    Fusion's link shows up after that.

Checked with the Bambu Studio 2.9.1, OrcaSlicer 2.5 and PrusaSlicer 2.9.7
command lines: a body with 100% infill and 6 walls gets more filament in all
three, also when touching bodies are joined into one object, and an infill
type on a body is kept (Bambu Studio 21 types, OrcaSlicer 26, PrusaSlicer
18). In Fusion, a test design (with a component placed twice) was measured,
selected, given body settings, exported with them and sliced.

What is tested for the printed weight and strength: the weight model
against Bambu Studio's sliced grams for 6 shapes with 3 settings (mean error
3.3 %, largest 7.2 %); in Fusion, the switch on and off (one copy per body,
all copies removed), Safe and Typical written into the copies (stiffness,
shear modulus, yield and tensile strength, Poisson's ratio, density), a
Bambu Lab PAHT-CF body with its data sheet values, a "Polymaker PPS GF"
body found under its catalog name, and a PLA body with the generic values.
Every data sheet value was read from the sheet and checked a second time;
all 45 data sheet links open. Not tested: a Static Stress study in Fusion
Simulation with these materials (Fusion's API cannot run one).

The slicer test matrix is unchanged against 0.8.0 (24 cases the same).

Slicer test matrix

Slicer test matrix against v0.8.0: 24 same.

Case Result Estimate
h2c-bambu SAME 299 min, 82.9 g
h2c-orca SAME 207 min, 33.3 g
h2d-bambu SAME 461 min, 139.6 g
h2d-database-bambu SAME 279 min, 77.1 g
h2d-database-orca SAME 121 min, 30.0 g
h2d-orca SAME 426 min, 103.7 g
h2d-touching-bambu SAME 92 min, 28.2 g
h2d-touching-orca SAME 91 min, 25.5 g
h3c-bambu SAME 76 min, 36.9 g
prusa-coreone-prusaslicer SAME grams min, 3.8 g
prusa-indx4t-orca SAME 120 min, 20.3 g
prusa-mk4mmu3-prusaslicer SAME grams min, 61.2 g
prusa-mmu3-orca SAME 534 min, 146.8 g
prusa-xl5t-database-prusaslicer SAME grams min, 30.2 g
prusa-xl5t-orca SAME 100 min, 34.3 g
prusa-xl5t-prusaslicer SAME grams min, 29.5 g
prusaslicer-layout SAME tools (T0, T1, T2, T3)
u1-mixed-orca SAME 85 min, 36.9 g
u1-orca SAME 121 min, 34.2 g
x1c-bambu SAME 598 min, 159.4 g
x1c-orca SAME 486 min, 75.9 g
x1c-touching-orca SAME 196 min, 37.4 g
x2d-bambu SAME 419 min, 135.9 g
x2d-orca SAME 354 min, 65.5 g

If Filamatch saves you time: buy me a coffee.