Manage One ROM Fires while they run - new live USB stack released

[piersfinlayson]

I have released firmware version v0.6.7, which supports plugins. There are currently two plugins available:

• system/usb - A full USB stack which allows management of One ROM while it is serving ROMs.
• user/blink - Simply blinks the status LED at around 1Hz

These are currently opt-in. The easiest way to get the USB stack is using the CLI:

$ onerom program --plugin usb --plugin blink --slot file=~/temp/aniron.bin,type=2332,cs1=0,cs2=1 --version 0.6.7
Programming device - DO NOT DISCONNECT
Programming complete

The CLI will automatically reboot One ROM after flashing, it will be running (serving bytes) and your One ROM should now appears as USB device 1209:f542:

% onerom scan --slots
Scanning ...
found 1 connected device:
---
One ROM Fire 24 E - Firmware: 0.6.7 State: Running Serial: B04E8C767BA338E7
  Configured with 3 slots - Slot 2 is active
  Slot 0:
    Chip 0: System Plugin
      Image source: https://images.onerom.org/plugins/system/usb/v0.1.1/plugin.bin
  Slot 1:
    Chip 0: User Plugin
      Image source: https://images.onerom.org/plugins/user/blink/v0.1.0/plugin.bin
  Slot 2 (active):
    Chip 0: 2332 Chip Select 1: Active Low Chip Select 2: Active High
      Image source: /Users/pdf/temp/aniron.bin

Use onerom peek and onerom poke to read and write the ROM image as One ROM serves it.

Run onerom to see what other options are available.

More description of the new features in v0.6.7 here: https://github.com/piersfinlayson/one-rom/releases/tag/v0.6.7

Any feedback, issues or questions, post on this discussion, a new discussion or an issue.

Enjoy!