OpenOCD script not found after updating to 5.4.3

[nwright91]

GNU MCU Eclipse OpenOCD, 64-bitOpen On-Chip Debugger 0.10.0+dev-00593-g23ad80df4 (2019-04-22-20:25)
Licensed under GNU GPL v2
For bug reports, read http://openocd.org/doc/doxygen/bugs.html
debug_level: 1
embedded:startup.tcl:56: Error: Can't find scripts/interface/stlink.cfg
in procedure 'script'
at file "embedded:startup.tcl", line 56

[SergeySn]

I have the same problem:

Checking size .pioenvs/BIGTREE_SKR_PRO/firmware.elf
Memory Usage -> http://bit.ly/pio-memory-usage
DATA: [ ] 4.5% (used 8780 bytes from 196608 bytes)
PROGRAM: [= ] 13.9% (used 146108 bytes from 1048576 bytes)
Configuring upload protocol...
AVAILABLE: cmsis-dap, dfu, jlink, stlink
CURRENT: upload_protocol = stlink
Uploading .pioenvs/BIGTREE_SKR_PRO/firmware.elf
GNU MCU Eclipse OpenOCD, 64-bitOpen On-Chip Debugger 0.10.0+dev-00593-g23ad80df4 (2019-04-22-20:18)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
debug_level: 1
embedded:startup.tcl:56: Error: Can't find scripts/interface/stlink.cfg
in procedure 'script'
at file "embedded:startup.tcl", line 56
*** [upload] Error 1

[valeros]

Hi @nwright91 @SergeySn ! Have you tried the latest version of the ststm32 platform (5.6.0)? Does it work?

[SergeySn]

@valeros If I use
platform = ststm32@5.6.0

Then it doesn't compile. It gives me error:
Compiling .pioenvs/BIGTREE_SKR_PRO/FrameworkArduino/stm32/analog.c.o In file included from /home/serg/.platformio/packages/framework-arduinoststm32/cores/arduino/stm32/pinmap.h:22:0, from /home/serg/.platformio/packages/framework-arduinoststm32/cores/arduino/stm32/PeripheralPins.h:34, from /home/serg/.platformio/packages/framework-arduinoststm32/variants/BIGTREE_GENERIC_STM32F407_5X/variant.h:37, from /home/serg/.platformio/packages/framework-arduinoststm32/system/STM32F4xx/stm32f4xx_hal_conf.h:4, from /home/serg/.platformio/packages/framework-arduinoststm32/system/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h:30, from /home/serg/.platformio/packages/framework-arduinoststm32/system/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h:250, from /home/serg/.platformio/packages/framework-arduinoststm32/cores/arduino/stm32/stm32_def.h:35, from /home/serg/.platformio/packages/framework-arduinoststm32/cores/arduino/stm32/PortNames.h:33, from /home/serg/.platformio/packages/framework-arduinoststm32/cores/arduino/stm32/PortNames.c:30: /home/serg/.platformio/packages/framework-arduinoststm32/cores/arduino/stm32/PinNames.h:16:12: error: 'PortA' undeclared here (not in a function) PA_0 = (PortA << 4) + 0x00,

[valeros]

@SergeySn Probably related to this #267. So it has nothing to do with OpenOCD.

[SergeySn]

@valeros Yes, they are related. In #267 you said:

Probably the best option is to roll back to the last working version of the platform.

But so far I was unable to find an older version of the platform where it all works.
If I roll back to ststm32@5.4.3 - it compiles, but when I try to upload it gives me:

embedded:startup.tcl:56: Error: Can't find scripts/interface/stlink.cfg

And with ststm32@5.6.0 it gives me error: 'PortA' undeclared

Any solution?

[valeros]

As a temporary workaround, you can try to install the latest platform and then manually downgrade the framework version to 3.10500.0 in platform.json here /home/serg/.platformio/platforms/ststm32/platform.json

"framework-arduinoststm32": {
      "type": "framework",
      "optional": true,
      "version": "~3.10500.0"
}

[Evg33]

MarlinFirmware/Marlin#14672 (comment)

[SergeySn]

@valeros If I switch to ststm32@5.6.0 and downgrade the framework version to 3.10500.0 in platform.json then it compiles, but when I try to upload, it gives me the same:
embedded:startup.tcl:56: Error: Can't find scripts/interface/stlink.cfg

[valeros]

@SergeySn What board do you use?

[SergeySn]

@valeros I use BigTreeTech SKR Pro.

[valeros]

@SergeySn There is no such board in our repository. Where can I find the manifest file for this board?

[SergeySn]

What's a "manifest file"?

I can see define BOARD_BIGTREE_SKR_PRO_V1_1 4207 // BigTreeTech SKR Pro v1.1 (STM32F407ZG)
in
https://github.com/MarlinFirmware/Marlin/blob/bugfix-2.0.x/Marlin/src/core/boards.h

[valeros]

Could you try to open this filebuildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json and replace its contents with the next config:

{
  "build": {
    "core": "stm32",
    "cpu": "cortex-m4",
    "extra_flags": "-DSTM32F407xx",
    "f_cpu": "168000000L",
    "hwids": [
      [
        "0x1EAF",
        "0x0003"
      ],
      [
        "0x0483",
        "0x3748"
      ]
    ],
    "ldscript": "stm32f407xg.ld",
    "mcu": "stm32f407zgt6",
    "variant": "BIGTREE_GENERIC_STM32F407_5X"
  },
  "debug": {
    "jlink_device": "STM32F407ZG",
    "openocd_target": "stm32f4x",
    "svd_path": "STM32F40x.svd"
  },
  "frameworks": [
    "arduino",
    "stm32cube"
  ],
  "name": "STM32F407ZG (192k RAM. 1024k Flash)",
  "upload": {
    "disable_flushing": false,
    "maximum_ram_size": 196608,
    "maximum_size": 1048576,
    "protocol": "stlink",
    "protocols": [
      "stlink",
      "dfu",
      "jlink"
    ],
    "require_upload_port": true,
    "use_1200bps_touch": false,
    "wait_for_upload_port": false
  },
  "url": "http://www.st.com/en/microcontrollers/stm32f407zg.html",
  "vendor": "Generic"
}

[SergeySn]

@valeros Wow, with your BigTree_SKR_Pro.json file - it works. Thanks a lot!