en/dragon/q6a/accessories/camera-8m-219

[giscus[bot]]

en/dragon/q6a/accessories/camera-8m-219

Preview the camera

https://docs.radxa.com/en/dragon/q6a/accessories/camera-8m-219

[giri13-spec]

I am using dragon Q6A with 8M219. The camera module is detected but when I try to display it didn't show anything but a blank white screen.pls help me if you know the solution. It would really really helpful🙏🏻

[Milir-Radxa]

Are there any log messages when you run the command to start the camera? You could shut down the system, reinstall the camera, and then try following the tutorial again.

[giri13-spec]

Hi,
Observed Behavior

• IMX219 camera is detected successfully.
• Camera applications show a completely white screen instead of a camera image.
• GStreamer pipelines fail during stream negotiation.

Camera Detection

'imx219 20-0010'
configuring streams: (0) 640x480-SRGGB10_CSI2P

Warnings

No IPA found in '/usr/lib/aarch64-linux-gnu/libcamera'
Recommended V4L2 control 0x009a0922 not supported
The sensor kernel driver needs to be fixed
Rotation control not available, default to 0 degrees

Pipeline Failure

streaming stopped, reason not-negotiated (-4)

Format Error

Unsupported media type: video/x-bayer

Bayer Conversion Test

could not link v4l2src0 to bayer2rgb0
neither element can handle caps video/x-bayer

Summary

• IMX219 sensor is detected.
• libcamera configures a RAW Bayer stream (640x480-SRGGB10_CSI2P).
• Display output shows a white screen.
• GStreamer reports "video/x-bayer" unsupported and fails with "not-negotiated (-4)".

How to fix this. Pls help me out been stuck about a month

[chenchongbiao]

The camera issue has been resolved on our side. We've updated the libcamera packages, but the documentation isn't ready yet — it will be included in the next release. Thanks for your patience.

Link: https://github.com/radxa-pkg/libcamera

[giri13-spec]

Pls help us radxa, it won't be really helpful 🙏🏻

[giri13-spec]

*would

[nanthini-balaganesan]

Hello,
I face the same issue too. (With Radxa Q6A with IMX 219 8M camera)
Only a black screen appears even after following the libcamera zip version.
Expecting you to reply soon.

You mentioned earlier that the fault is on the software and you are sorting that out. You also shared the zip files and code to follow which is not working for us. So it would be nice if you inform us when the updated software would release, else we expect you to notice us if you are working on this issue and how to sort out things.

[chenchongbiao]

Let me try to reproduce the issue on my side first.

[chenchongbiao]

1. Use the official system image
   Make sure you're running the official RadxaOS image:
   Download: https://github.com/radxa-build/radxa-dragon-q6a/releases/download/rsdk-r2/radxa-dragon-q6a_noble_gnome_r2.output_512.img.xz

2. Install the updated libcamera packages

Download and install the pre-built debs
https://github.com/chenchongbiao/libcamera/actions/runs/27256200300/artifacts/7527665865

unzip libcamera.zip
sudo apt update
sudo apt install ./*.deb
sudo apt install -y gstreamer1.0-tools gstreamer1.0-plugins-base

3. Enable the camera overlay via rsetup

sudo rsetup

Navigate to: Overlays → Enable camera2 (for CAM2 slot) or camera3 (for CAM3 slot).

Check the board markings to confirm which slot your camera is connected to. The silkscreen labels on the board are CAM2 and CAM3.

Do NOT enable both camera2 and camera3 overlays at the same time — they will conflict and block each other (CSID arbitration issue). Only enable the one you are actually using.

After enabling the overlay, reboot:

sudo reboot

4. If hardware encoder causes reboot, apply the fix
   See: https://docs.radxa.com/en/dragon/q6a/faq#why-does-q6a-reboot-immediately-when-using-the-hardware-encoder

5. Verify the camera
   Hardware-encoded recording examples:

H.264 1080p
gst-launch-1.0 -e libcamerasrc \
        ! videoconvert ! video/x-raw,format=NV12,width=1920,height=1080,framerate=30/1 \
        ! v4l2h264enc ! h264parse ! mp4mux \
        ! filesink location=/tmp/camera-h264.mp4
    
H.265 1080p
gst-launch-1.0 -e libcamerasrc \
        ! videoconvert ! video/x-raw,format=NV12,width=1920,height=1080,framerate=30/1 \
        ! v4l2h265enc ! h265parse ! mp4mux \
        ! filesink location=/tmp/camera-h265.mp4
    
Full resolution 3272×2464 H.264
gst-launch-1.0 -e libcamerasrc \
        ! video/x-raw,width=3272,height=2464,framerate=30/1 \
        ! queue ! videoconvert ! video/x-raw,format=NV12 \
        ! queue ! v4l2h264enc ! h264parse ! mp4mux \
        ! filesink location=/tmp/camera-8mp.mp4