feat: rock pi s pinout

[EESN-W]

修改说明

• 增加 ROCK Pi S 引脚定义
  close Issue from rockpi/rockpis/README #1040

[windsurf-bot]

Other comments (6)

• docs/rockpi/rockpis/hardware/pin-gpio.md (48-49) There's a typo in the pin names 'MCIP8' and 'MCIP7', which should likely be 'MICP8' and 'MICP7' (Microphone Positive) to match with MICN8 and MICN7 (Microphone Negative).

  |           |             |                  | MICN8       | <div className='green'>35</div> | <div className='green'>36</div> | MICP8     |                  |              |           |
  |           |             |                  | MICN7       | <div className='green'>37</div> | <div className='green'>38</div> | MICP7     |                  |              |           |
  

• docs/rockpi/rockpis/hardware/pin-gpio.md (54-55) Similar typo for MCIP2 and MCIP1 which should be MICP2 and MICP1.

  |           |             |                  | MICN2       | <div className='green'>47</div> | <div className='green'>48</div> | MICP2     |                  |              |           |
  |           |             |                  | MICN1       | <div className='green'>49</div> | <div className='green'>50</div> | MICP1     |                  |              |           |
  

• i18n/en/docusaurus-plugin-content-docs/current/rockpi/rockpis/hardware/pin-gpio.md (50-50) There's a typo in the GPIO pin names: 'GPOI3_B5' and 'GPOI3_B4' should be 'GPIO3_B5' and 'GPIO3_B4' respectively.

  | UART3_TX  | I2C3_SCL_M1 | SPI1_CSN0        | GPIO3_B5    | <div className='green'>39</div> | <div className='green'>40</div> | GPIO3_B4  | SPI1_MOSI        | I2C3_SDA_M1  | UART3_RX  |
  

• i18n/en/docusaurus-plugin-content-docs/current/rockpi/rockpis/hardware/pin-gpio.md (51-51) There's a typo in the GPIO pin name: 'GPOI3_B3' should be 'GPIO3_B3'.

  |           |             | SPI1_CLK         | GPIO3_B3    | <div className='green'>41</div> | <div className='green'>42</div> | GPOI3_B2  | SPI1_MISO        |              |           |
  

• i18n/en/docusaurus-plugin-content-docs/current/rockpi/rockpis/hardware/pin-gpio.md (51-51) There's a typo in the GPIO pin name: 'GPOI3_B2' should be 'GPIO3_B2'.

  |           |             | SPI1_CLK         | GPIO3_B3    | <div className='green'>41</div> | <div className='green'>42</div> | GPIO3_B2  | SPI1_MISO        |              |           |
  

• i18n/en/docusaurus-plugin-content-docs/current/rockpi/rockpis/hardware/pin-gpio.md (13-13) The TabItem components are used without a Tabs wrapper. In Docusaurus, TabItem components must be wrapped in a Tabs component for the tabs to function properly. Consider adding a Tabs wrapper around each TabItem or group of TabItems.

💡 To request another review, post a new comment with "/windsurf-review".