Skip to content

Membrane Control 0.1.23 - Bluetooth controller and sensor setup

Pre-release
Pre-release

Choose a tag to compare

@regular030 regular030 released this 06 Nov 18:07
· 16 commits to main since this release

Membrane Control 0.1.23 adds normal ESP32 controller operation over Bluetooth and a Sensor setup window for live inputs and reference checks.

Developed for Dr. Onita Basu's lab at Carleton University.

  • Install MembraneControl-Setup-0.1.23-windows-x64.exe. With the loads isolated, use Flash normal controller (Bluetooth) to upload over the wired USB-to-UART port. Keep the existing pairing from Flash ESP32 Bluetooth test, then connect to its outgoing Bluetooth COM port in the app. The normal build uses real manual valve outputs and the same hardware profile as the wired controller.
  • Open Sensor setup on Dashboard or under Connections and settings to see live pressure, flow and pump feedback pin voltages. Capture a per-sensor zero and two measured reference points, then copy the readings and calculated fit for the rig's profile.
  • Firmware discards the previous control session when Bluetooth disconnects. Wired firmware writes each reply as one complete serial frame. Hardware testing on the lab rig remains pending.

Bluetooth controller instructions · Sensor setup instructions