I. Installation

Follow these steps to set up the Stream Deck MCP integration with Streamer.bot.

---

⚡ Requirements

• Stream Deck 7.4.0 or newer
• Node.js installed. Elgato recommends the LTS version
  https://nodejs.org/
• Streamer.bot installed
• Stream Deck application running

---

🧩 Step 1: Enable MCP in Stream Deck

This integration relies on MCP (Multi Control Protocol), which must be enabled.

1. Open Stream Deck
2. Go to Settings
3. Enable "Enable MCP Actions"

Warning

This step is required. The integration will not work if MCP is disabled.

👉 Official MCP setup guide:
https://www.elgato.com/us/en/explorer/products/stream-deck/sd-mcp-setup/

---

📦 Step 2: Install the Extension

1. Download the extension (ZIP file)

2. Extract the contents

3. Copy the extracted folder into your Streamer.bot directory

---

🔧 Step 3: Import Actions into Streamer.bot

1. Open Streamer.bot
2. Go to Import
3. Get the latest import code here
4. Confirm the import

---

▶️ Step 4: Start Using It

• Make sure Stream Deck is running
• Make sure your buttons are already set up in Stream Deck MCP Actions page
• Trigger actions using Streamer.bot triggers

---

✅ Verification

To confirm everything is working:

• Open this in your browser http://localhost:9090/health

• The page should return this information:

  {"status":"ok","AppConnected":true}

If nothing happens:

• Ensure MCP is enabled
• Ensure Stream Deck is open

---

⚠️ Notes

• This integration does not create buttons. It executes existing ones in your Stream Deck MCP Actions Page
• Some plugin actions may behave differently depending on MCP support

---

➡️ Next Step

Now that everything is installed, proceed to:

👉 Configuration

Learn how to map Streamer.bot triggers to your Stream Deck actions.