Skip to content

Releases

Bilocus 0.3.1

Choose a tag to compare

@robDL89 robDL89 released this 18 Nov 20:25
5d46ed7

Maintenance release: Blender 5.3, a host collection for pulls with links, and a steadier connection.

New

  • Blender 5.3. The add-on now runs on Blender 4.2 LTS, 4.5 LTS, 5.1, 5.2 and 5.3. It is tested in CI and in Blender 5.3 with Revit.
  • Host collection in the pull. When the model has linked models, the host's own elements arrive in FromRevit/HostModel - <file name>, next to the LinkModel collections. Elements already pulled move there only from the FromRevit root. A model without links keeps everything in FromRevit.

Fixed

  • Blender sends nothing until Revit answers the handshake. A second Blender waits on waiting for Revit instead of freezing on Sync, and a protocol mismatch disconnects.
  • A dropped connection redraws the panel and marks a bake or proxy still waiting as lost.
  • A Blender that stops reading can no longer freeze Revit on a send.
  • If one member of Bake together fails, it keeps its previous geometry. The Revit Status note now shows in the Blender panel.
  • A BL_ parameter with a formula of its own is no longer removed.

Changed

  • Each bake checkbox now names its bake: DirectShape: smooth mesh and Family: accept open solid. Family Bake always makes a solid, so a family shows every face edge.

Updating from 0.3.0

Update both sides. The protocol is unchanged (version 2), so a 0.3.0 add-on still connects, but the fixes need 0.3.1 on both Revit and Blender.

  • Revit: close Revit and unzip the Bilocus-Revit<version>.zip for your Revit over the old files in %AppData%\Autodesk\Revit\Addins\<version>.
  • Blender: in Preferences > Add-ons, remove Bilocus, use Install from Disk on the new Bilocus-Blender.zip, enable it and restart Blender.
File For
Bilocus-Revit2024.zip Revit 2024
Bilocus-Revit2025.zip Revit 2025
Bilocus-Revit2026.zip Revit 2026
Bilocus-Revit2027.zip Revit 2027
Bilocus-Blender.zip Blender 4.2, 4.5, 5.1, 5.2 and 5.3

Bilocus 0.3.0

Choose a tag to compare

@robDL89 robDL89 released this 29 Oct 16:24
2824e85

Feature release: whole linked models in the pull, metric UVs, MEP system names, and more.

New

  • Linked models in the pull. Select a Revit link and press Send Selection: every model element of the linked document arrives in Blender in place, in FromRevit/LinkModel - <link name>, with identical family instances sharing one mesh. The sub-collection is rebuilt on every send, so edits to those objects are not kept. Large links take a while; Blender stays usable and the panel shows the progress.
  • MEP system in the name. Pipes, ducts, fittings and accessories are named with their system type, Pipes (Domestic Hot Water) - Standard [123], and identical fittings on different systems no longer share a mesh: assign a material per system with Select Pattern and Link Materials.
  • Metric UVs on pulled meshes. Every mesh from Revit arrives with a UVMap, one unit per meter: a 1 x 1 m texture shows at its real size on any element. Each face is projected on its own plane, so a wall at any angle is not stretched, and on walls and roofs the texture runs level. Exported to Unreal it is UV channel 0, a clean source for Generate Lightmap UVs. Curved surfaces get small breaks between faces. On by default; turn off Metric UVs in the pull section to unwrap your own way.
  • Preview opacity. An Opacity slider next to the preview colors in the Blender panel makes the preview faces translucent in Revit, to see the model through them. The edges stay opaque. Applied immediately, no Sync needed.
  • Family dimension parameters. A family baked from Blender carries BL_Length, BL_Width, BL_Height, BL_Area and BL_Volume (closed meshes only) as type parameters, plus BL_Thickness when set. Values come from the object's extent and can be set by hand from an edge or face selection in the panel, except the volume. Informative only: they do not drive the geometry and are rewritten at every bake. A BL_ parameter you use in a formula in the family editor is kept.
  • Arcs on inclined planes in Create Proxy, Arcs and lines mode. An arc on a plane tilted sideways (a ring on an inclined plane, a curve on a roof pitch) now becomes one arc on its own plane, and a beam picked on it follows that plane.

Updating from 0.2.0

Update both sides. The protocol is unchanged (version 2), so a 0.2.0 add-on still connects, but the new features need 0.3.0 on both Revit and Blender.

  • Revit: close Revit, unzip the Bilocus-Revit<version>.zip that matches your Revit over the old files in %AppData%\Autodesk\Revit\Addins\<version>.
  • Blender: in Preferences > Add-ons remove Bilocus, Install from Disk the new Bilocus-Blender.zip, enable it and restart Blender.
File For
Bilocus-Revit2024.zip Revit 2024
Bilocus-Revit2025.zip Revit 2025
Bilocus-Revit2026.zip Revit 2026
Bilocus-Revit2027.zip Revit 2027
Bilocus-Blender.zip Blender 4.2, 4.5, 5.1 and 5.2

Bilocus 0.2.0

Choose a tag to compare

@robDL89 robDL89 released this 10 Oct 13:12
4a6961b

Feature release: shared meshes on pull, clean pulled geometry, and more Revit and Blender versions.

New

  • Instanced pull. Family instances with identical geometry share one mesh in Blender: edit, UV or replace one (Ctrl+L Link Object Data from an asset) and every copy follows. A new element of the same type arrives with what its siblings show. A shared mesh you have edited is kept on the next pull; an untouched one follows Revit.
  • Revit 2026 and 2027. One zip per Revit version, 2024 to 2027.
  • Blender 4.2 LTS and 4.5 LTS. The add-on now installs on Blender 4.2 and later.

Changed

  • Pulled meshes are welded ! Revit triangulates each face on its own, so a pulled element used to arrive as loose triangles. Coincident vertices are now merged: edge loops, bevel and select linked work. A shared mesh already in your file is reused as it is: weld it with Merge by Distance, or delete the objects and pull them again.

Updating from 0.1.x

Update both sides. The protocol changed (version 2): a 0.1.x add-on does not talk to a 0.2.0 one.

  • Revit: close Revit, unzip the Bilocus-Revit<version>.zip that matches your Revit over the old files in %AppData%\Autodesk\Revit\Addins\<version>.
  • Blender: in Preferences > Add-ons remove Bilocus, Install from Disk the new Bilocus-Blender.zip, enable it and restart Blender.
File For
Bilocus-Revit2024.zip Revit 2024
Bilocus-Revit2025.zip Revit 2025
Bilocus-Revit2026.zip Revit 2026
Bilocus-Revit2027.zip Revit 2027
Bilocus-Blender.zip Blender 4.2, 4.5, 5.1 and 5.2

Bilocus 0.1.1

Choose a tag to compare

@robDL89 robDL89 released this 03 Oct 18:02
fa8fa8b

Bug-fix release. Recommended for everyone on 0.1.0, especially if you use Bake Family.

Fixed

  • Bake Family could overwrite an existing family. A new family was loaded under Revit's temporary name ("Family1", "Family2"...) instead of BL_<name>. If the project already had a family with that name, its geometry was replaced, so the solid showed up in that family's instances somewhere else in the model. New families are now loaded as BL_<name> and never overwrite an existing family. Families created by 0.1.0 are renamed to BL_<name> on their next bake.
  • Send Selection could overwrite a Shift+D copy. A duplicate of a pulled object kept its Revit id, and pulling the element again could update the copy (for example a cutting solid modeled from a beam) instead of the original. Now only the pulled object is updated; if it is gone, a new object is created and the copies are left alone.

Updating from 0.1.0

  • Revit: close Revit, unzip the new Bilocus-Revit2024.zip or Bilocus-Revit2025.zip over the old files in %AppData%\Autodesk\Revit\Addins\<version>.
  • Blender: in Preferences > Add-ons remove Bilocus, Install from Disk the new Bilocus-Blender.zip, enable it and restart Blender.
File For
Bilocus-Revit2024.zip Revit 2024
Bilocus-Revit2025.zip Revit 2025
Bilocus-Blender.zip Blender 5.1 and 5.2

Bilocus 0.1.0

Choose a tag to compare

@robDL89 robDL89 released this 28 Sep 10:18
83f4710

First public release of Bilocus: a free, open-source live bridge between Blender and Autodesk Revit.

What's in it

  • Live preview of Blender geometry inside Revit 3D views (DirectContext3D), with live transforms and manual geometry Sync. The preview survives a closed Blender and can be cleared from either side (Clear Preview).
  • Selection pull from Revit to Blender (FromRevit collection), with in-place update on re-send.
  • Snappable proxy lines in Revit from selected Blender edges, as polylines or arcs.
  • Bake into Revit as DirectShape or as loadable family (BL_<name>), with Revit category, replacement on re-bake and Remove Bake.
  • "Bake together": one family with all the selected objects, named after and placed at the active object.
  • Preview colors for faces and edges chosen in the Blender panel.

Downloads

File For
Bilocus-Revit2024.zip Revit 2024
Bilocus-Revit2025.zip Revit 2025
Bilocus-Blender.zip Blender 5.1 and 5.2 (install from disk, do not unzip)

Installation steps are in the README.

Requires Windows. Everything runs locally: nothing leaves your machine.