Repository navigation
Bilocus 0.3.0
Feature release: whole linked models in the pull, metric UVs, MEP system names, and more.
New
- Linked models in the pull. Select a Revit link and press Send Selection: every model element of the linked document arrives in Blender in place, in
FromRevit/LinkModel - <link name>, with identical family instances sharing one mesh. The sub-collection is rebuilt on every send, so edits to those objects are not kept. Large links take a while; Blender stays usable and the panel shows the progress. - MEP system in the name. Pipes, ducts, fittings and accessories are named with their system type,
Pipes (Domestic Hot Water) - Standard [123], and identical fittings on different systems no longer share a mesh: assign a material per system with Select Pattern and Link Materials. - Metric UVs on pulled meshes. Every mesh from Revit arrives with a
UVMap, one unit per meter: a 1 x 1 m texture shows at its real size on any element. Each face is projected on its own plane, so a wall at any angle is not stretched, and on walls and roofs the texture runs level. Exported to Unreal it is UV channel 0, a clean source for Generate Lightmap UVs. Curved surfaces get small breaks between faces. On by default; turn off Metric UVs in the pull section to unwrap your own way. - Preview opacity. An Opacity slider next to the preview colors in the Blender panel makes the preview faces translucent in Revit, to see the model through them. The edges stay opaque. Applied immediately, no Sync needed.
- Family dimension parameters. A family baked from Blender carries
BL_Length,BL_Width,BL_Height,BL_AreaandBL_Volume(closed meshes only) as type parameters, plusBL_Thicknesswhen set. Values come from the object's extent and can be set by hand from an edge or face selection in the panel, except the volume. Informative only: they do not drive the geometry and are rewritten at every bake. ABL_parameter you use in a formula in the family editor is kept. - Arcs on inclined planes in Create Proxy, Arcs and lines mode. An arc on a plane tilted sideways (a ring on an inclined plane, a curve on a roof pitch) now becomes one arc on its own plane, and a beam picked on it follows that plane.
Updating from 0.2.0
Update both sides. The protocol is unchanged (version 2), so a 0.2.0 add-on still connects, but the new features need 0.3.0 on both Revit and Blender.
- Revit: close Revit, unzip the
Bilocus-Revit<version>.zipthat matches your Revit over the old files in%AppData%\Autodesk\Revit\Addins\<version>. - Blender: in Preferences > Add-ons remove Bilocus, Install from Disk the new
Bilocus-Blender.zip, enable it and restart Blender.
| File | For |
|---|---|
Bilocus-Revit2024.zip |
Revit 2024 |
Bilocus-Revit2025.zip |
Revit 2025 |
Bilocus-Revit2026.zip |
Revit 2026 |
Bilocus-Revit2027.zip |
Revit 2027 |
Bilocus-Blender.zip |
Blender 4.2, 4.5, 5.1 and 5.2 |