Skip to content

Releases

v0.1.9

Choose a tag to compare

@github-actions github-actions released this 15 Nov 09:49
  • Image step: click a column header (Release, Ubuntu, Desktop, Kernel,
    Size; the download size) to sort the images by it, again to reverse; the desktop flavor
    has its own column. The Release, Kernel and Size columns no longer wrap,
    so their headers stay readable with a full release list.
  • Fix: a write that ended with an unexpected error left the app thinking it
    was still writing, which greyed out Update in Settings until a restart. It
    now ends with the error shown.

v0.1.8

Choose a tag to compare

@github-actions github-actions released this 15 Nov 02:27
  • Maskrom: when the board's loader returns filler past a point on read-back
    (an RK3576 reading the SD card over USB, from 32 MiB on), the result says
    how much was verified, as a warning instead of an error; on a ROCK 4D such
    a card booted normally. A write with no checksum to compare no longer says
    "verified".

v0.1.7

Choose a tag to compare

@github-actions github-actions released this 15 Nov 01:59
  • Maskrom on the RK3576: a board whose loader still runs from an earlier
    attempt is written without sending the loader again (sending it failed
    with "Downloading bootloader failed!"). The app asks the board with rfi
    first, and also when sending the loader fails.

v0.1.6

Choose a tag to compare

@github-actions github-actions released this 15 Nov 01:37
  • macOS: updates are installed inside the app. A Homebrew install is
    updated by running Homebrew for you after you confirm ("brew update", then
    "brew upgrade --cask roxora-imager", as your user, with its output in the
    dialog); an app from the DMG or install.sh is replaced by the one in the
    new DMG, which is downloaded, checked, mounted out of sight and copied
    into place. Either way the dialog then offers "Restart now". The old app
    stays untouched if anything fails; the command to copy and the opened DMG
    remain as the fallback.
  • Fix: Maskrom writing to an RK3576 board (seen on a ROCK 4D from a Mac)
    stopped with "The board did not come back after the loader was sent". The
    board does come back, but still lists as Maskrom; it now counts as back
    when it answers with its flash size.
  • Fix: the Copy buttons did nothing in the desktop app (the brew command in
    the update dialog, the command shown when a package could not be
    installed). The page has no clipboard permission; copying now goes through
    the app itself, and the button reads "Copied" after it was pressed. The
    udev rule on the Destination step has a Copy button too.

v0.1.5

Choose a tag to compare

@github-actions github-actions released this 15 Nov 01:00
  • Images in parts. GitHub takes no release file of 2 GiB or more, so Roxora
    releases carry the desktop images as <file>.part1, <file>.part2, ...
    (from Roxora 2026.11.4 on). The app downloads the parts in order into one
    file, with one progress bar over the whole image, checks each part and
    then the joined file against the release's SHA-256, and writes it as any
    other image. Earlier versions do not list these images. The web version
    cannot join the parts; it links them and asks for the joined file.
  • Roxora's colours, as on the website: a mint-tinted page in the light
    theme and the mark's near-black and deep greens in the dark theme, links
    and selections in Roxora green, and primary buttons in the mark's bright
    green with dark text. Status colours stay PatternFly's. Every text colour
    meets WCAG AA contrast.

v0.1.4

Choose a tag to compare

@github-actions github-actions released this 14 Nov 22:48

The first normal release; earlier versions were pre-releases.

  • Images: the newest Ubuntu LTS (26.04) is chosen by default; a non-LTS
    release such as 26.10 comes after the LTS ones.
  • Images: no "Tested on hardware" or "CI only" labels; a Roxora beta is
    called a beta, and catalogs of beta releases (YYYY.MM.N-beta.N) are read.
  • New: updates. When a newer version is out, a notice above the steps names
    it, with a line from its release notes and an Update button. Pressing it
    says what will happen and, after "Download and install", does it: the DMG
    is downloaded and opened on macOS, the installer is run on Windows, an
    AppImage is replaced in place, a .deb or .rpm is installed through the
    package manager with pkexec; a Homebrew install is shown the brew command.
    Every download is compared with the SHA-256 GitHub lists for the file and
    refused without it. Settings has "Check now", which says what it found.
  • Fix: the daily check for a new version never found one. It asked GitHub
    for the "latest" release, which leaves out pre-releases, and every release
    so far was a pre-release, so the answer was always "no release".
  • Normal releases and betas. From this version on a release is a normal
    release; a GitHub pre-release (a version such as 0.1.5-beta.1) is a beta.
    The app offers betas only with "Also offer beta versions (pre-releases)"
    turned on in Settings, and install.sh installs one only with BETA=1.
    The release workflow publishes a tag with a suffix as a pre-release and
    any other tag as a normal release.
  • Images: desktop images are listed. The Image step says under the Ubuntu
    version whether an image is a command line image or has the GNOME desktop
    (minimal or full), and lists the command line image first. Releases before
    the desktop images are read as before.

v0.1.3

v0.1.3 Pre-release
Pre-release

Choose a tag to compare

@github-actions github-actions released this 14 Nov 09:58

A pre-release, still not tested on hardware.

  • New: an image file on this computer can be written to an SD card or USB
    drive ("Use an image file on this computer" on the Board and Image steps,
    or drop the file on the window): .img, .img.xz, .img.gz, .img.bz2. A file
    with the name of an image in the Roxora releases is checked against that
    release's SHA-256 and written without a download. Any other file is
    written as a custom image: the app says that no release vouches for it,
    reads it once to take the SHA-256 of its decompressed data, and compares
    the drive with that after writing. Zip archives are not taken, and the
    app does not yet open when an image file is double-clicked.
  • Maskrom, SPI NOR flash: a file that cannot be a bootloader is refused
    when it is chosen instead of after the board is connected: one larger
    than the board's SPI flash (16 MiB on the ROCK 4D; 32 MiB where the size
    is not known), and a whole disk image (the name of a release image, or a
    partition table that reaches past the flash). The message points to the
    release's SPI bootloader and to writing the image to an SD card.
  • macOS: SD cards and USB drives are now written through Apple's authopen,
    as Raspberry Pi Imager and Armbian Imager do, instead of a writer running
    as root. With 0.1.2 a card on a Mac could keep its old contents from 17 MiB
    on (the read-back check reported it), and opening the drive could fail with
    "EPERM: operation not permitted". macOS asks for the password once per
    write, for that one drive; Full Disk Access is not needed. The data goes to
    the raw disk in whole 1 MiB pieces and is read back through the same open
    drive. Tested in CI against a RAM disk, not yet on a real card.
  • macOS: the DMG no longer contains the etcher-sdk writer, only the small
    helper roxora-imager-rawdisk.

v0.1.2

v0.1.2 Pre-release
Pre-release

Choose a tag to compare

@github-actions github-actions released this 14 Nov 07:20

A pre-release, still not tested on hardware.

  • Fix: on macOS, writing an SD card could end with "The writer could not be
    started" and "file closed" (EBADF) after the data was written, before the
    card was read back. The image file was closed while a read on it was still
    pending.

v0.1.1

v0.1.1 Pre-release
Pre-release

Choose a tag to compare

@github-actions github-actions released this 14 Nov 06:56

A pre-release, still not tested on hardware.

  • Fix: writing an SD card or USB drive failed at once with "The writer could
    not be started. Node.util.isObject is not a function" on every system. The
    module that asks for administrator rights used functions that Electron's
    Node.js no longer has.

v0.1.0

v0.1.0 Pre-release
Pre-release

Choose a tag to compare

@github-actions github-actions released this 12 Nov 09:29

First version, a pre-release: not yet tested on hardware.

  • Write Roxora images from the roxora-os/build releases to SD cards and USB
    drives, with the download checked against the release SHA-256 and the drive
    read back and compared with it.
  • Write a board's eMMC or SPI NOR over USB in Maskrom mode, using
    rkdeveloptool built for WebAssembly as in edk2-webflash, with the same
    read-back check.
  • System disks are never offered as targets.
  • Checks for a new version at most once a day; can be turned off.
  • The Maskrom loader is not shipped: the first Maskrom write builds it from
    Rockchip's rkbin files at a pinned commit, each checked against its SHA-256.
  • Packages for Windows (x64), macOS (Apple silicon and Intel) and Linux
    (AppImage, .deb, .rpm; x86_64 and arm64). Windows builds are not signed yet;
    macOS builds are ad-hoc signed.