Skip to content

network services

github-actions[bot] edited this page Nov 8, 2026 · 2 revisions

FTP, PS2Link & Remote Control

Network services are included in the standard build but remain demand-driven so normal boots are not slowed by an always-on network stack.

FTP Server

Start Tools > FTP Server for the exclusive file-transfer screen. Memory-card, USB and controller drivers are prepared at startup. HDD/PFS and ATA drivers start when the console supports them. The screen shows connection and transfer status; the configured Cancel button stops FTP and returns to Launchstation after closing files. See FTP devices and paths for the supported scope.

PS2Link support remains available for development-oriented transfer/launch workflows. Like FTP, it is not started during an ordinary dashboard boot.

R3Z remote-command compatibility

Legacy PC command and staged ISO receiver code remains in the project. Those dashboard pollers do not run inside the exclusive FTP file-transfer screen.

Recommended troubleshooting sequence

  1. Confirm physical Ethernet/link and adapter availability.
  2. Confirm IP, netmask and gateway.
  3. Start only the intended service.
  4. Test basic connectivity from the PC.
  5. Then debug the higher-level command/transfer request.

Network project credits

PS2Link is a ps2dev project. The retained legacy ps2ftpd sources credit Jesper Svennevid and carry Academic Free License version 2.0. The Credits & Licenses page lists their respective roles.

Network exposure

These are homebrew console services, not hardened internet-facing daemons. Keep the PS2 on a trusted local network and do not forward service ports from the public internet.

Clone this wiki locally