Skip to content

neutrino

github-actions[bot] edited this page Nov 15, 2026 · 3 revisions

PS2 ISO Launching · Neutrino

Open a PS2 .ISO in File Browser and Launchstation hands it to an external Neutrino installation.

External core
Neutrino is not embedded in Launchstation. Install a compatible Neutrino package separately; Launchstation resolves it, validates the image, builds argv and preserves the backing-store stack for handoff.

Loader search order

  1. Explicit path — Settings → Launching → Disc & image loaders → Neutrino.
  2. ISO's device — case-tolerant /NEUTRINO/neutrino.elf and /neutrino/neutrino.elf forms.
  3. mc0: — same case-tolerant forms.
  4. mc1: — same case-tolerant forms.

Each executable is validated and prepared before searching the next location. A usable configured path skips all fallback searches, including both memory-card slots. If preparation fails, discovery continues in the order above.

Usable installation

Launchstation checks that the Neutrino ELF is readable and valid; it does not check configuration files or modules. The user is responsible for providing a complete Neutrino installation.

Per-launch compatibility and video options

Select a valid PS2 ISO to open the R3Z Neutrino options screen. Run game is the first row and is highlighted when the dashboard menu opens. Five independent compatibility choices: fast disc reads (0), synchronous disc reads (2), unhook system calls (3), emulate dual-layer DVD (5), and fix game buffer overrun (7). Neutrino mode 1 is a dummy and is intentionally omitted.

Video choices: original 480i/576i, auto 240p/288p, auto 480p/576p and 1080i at width x1, x2 or x3. Video compatibility: Off or field-flipping modes 1–3. Debug Colors and PS2 Logo are independent toggles. Use D-pad to select/change, then Run or Cancel. Without a saved profile, options default to Off/Original on every launch.

Optional per-game profiles

For an ISO with a valid SYSTEM.CNF Game ID such as SLUS_123.45, the dashboard loads previously saved Neutrino options before showing the menu. Choose Save for this game to persist the current choices, or Reset this launch to clear the current selections without deleting the stored profile. Normal Run does not save changes.

Profiles use two checksum-verified NEUT-<GameID>-A.CNF / -B.CNF files in Launchstation's own dashboard settings location, rather than beside the ISO or inside LAUNCHELF.CNF. Each save writes the older/invalid slot; the last valid one remains available after an interrupted write. Only verified Game IDs can be saved, and a malformed profile is ignored. If the settings storage is unavailable or would require an incompatible MMCE/MX4SIO memory-card stack, Launchstation skips the profile without affecting game launch. No active VMC or existing game data is changed.

These are Neutrino command-line options, not changes to Launchstation's native disc drivers or global screen calibration. Settings → Launching → Disc & image loaders offers independent Disable Ember/POPStarter/Neutrino switches (Off by default).

Launch arguments

-bsd=<backend>
-dvd=<device:path/to/game.iso>
-qb
-cwd=<neutrino install directory>

Current Neutrino documents file-mode paths such as usb:, mx4sio:, mmce:, udpfs: and ata:. The numeric unit suffix, where present, is accepted by Neutrino's backend detector.

Supported sources

Launchstation source Neutrino BSD
USB / MASS usb
MX4SIO mx4sio
MMCE mmce
ATA/exFAT ata
UDPFS udpfs

Image validation

Launchstation opens the selected image and checks the ISO9660 primary volume descriptor at sector 16 for the CD001 signature before handing control to Neutrino.

Game ID, RetroGem and MMCE cards

Launchstation reads a valid PS2 title ID such as SLUS_123.45 from the selected ISO's root SYSTEM.CNF BOOT2 line. When the Game ID for discs setting is enabled, it displays the RetroGem-compatible launch signal. The reader works independently of MMCE and does not load or reset storage drivers.

With MMCE support, Launchstation uses the R3Z 4.80 slot policy: it pings each adapter, sends the Game ID to responding adapters and waits up to 15 two-second status polls after an accepted request. Like NHDDL's rewrite branch, it waits two seconds before each status read and retries temporary read failures within the same limit. Before handoff, each requested switch must return a successful status with the busy bit clear; no separate VMC identity or filesystem check is performed. An ISO or Neutrino ELF stored on mmce0: or mmce1: uses the SD filesystem and does not exclude that adapter from VMC selection. If Neutrino is loaded from the emulated memory-card filesystem mc0: or mc1:, that slot is left unchanged because the loader still needs to read the ELF. The resolved ELF path identifies the slot when an mc: alias was configured. MMCE switching is skipped when the ISO or Neutrino uses MX4SIO, or its driver is still active. Missing Game IDs and absent adapters do not block the game launch. A responding adapter that rejects the switch or cannot report ready within 15 polls stops the launch with an error, leaving the menu available.

Keep-IOP handoff

Quick-boot consumes the already-mounted backing store. ISO launches therefore use a dedicated keep-IOP loader path and do not obey the generic “Reset IOP before ELF launch” preference.

If a game does not boot

  1. Verify the same ISO can be read in File Browser.
  2. Set Neutrino explicitly to remove discovery ambiguity.
  3. Confirm the Neutrino installation is complete for the version you use.
  4. Try a known-good ISO.
  5. Report exact Launchstation hash, Neutrino version and device backend.

MMCE game-ID cards

After confirming a launch, Launchstation initializes MMCE before preparing Neutrino and requests the ISO's game-ID VMC on responding adapters before handoff. No driver auto-start setting is needed. MMCE is left untouched when the ISO or Neutrino ELF uses MX4SIO. Only an emulated mc0:/mc1: slot holding Neutrino stays unchanged; mmceN: SD paths remain eligible. Missing hardware does not block the game. Once an adapter responds, its switch must succeed and report ready before launching. ISO launches show the Neutrino options menu without informational launch popups. Driver preparation, card switching and cleanup waits are quiet; failed launches still report an error.

Clone this wiki locally