Skip to content

tracker-ff 1.0.0

Choose a tag to compare

@sbialy sbialy released this 04 Nov 20:06
· 54 commits to main since this release

tracker-ff 1.0.0

Unofficial community firmware for the original Polyend Tracker (the MK66 model). It is a fork of Polyend's open source firmware tracker-ce and adds 17 synth engines to the original, which upstream has only on the Tracker+ and the Mini.

What you get

  • 17 synth engines in one image: ACD, FAT, VAP, WTFM, PERC, CHIP, JU6, PHZ, FM4, D-Type, CS-Type, A-Type, T-Type, 8-Type, Hand-Type, B-Type and Arc-Type. Most come from OpenTracker and opentracker-synths. CHIP is Polyend's own open Chiptune voice. PHZ is a phase distortion engine written for this project from the public manual.
  • Up to 4 voices per synth instrument, a shared voice pool (default 4, at most 8) and a governor that drops voices when the audio load gets too high.
  • .patch files load and save from Patches/<ENGINE>/ on the SD card. Pitch bend works from MIDI and from the Micro-tune FX.
  • Lower idle audio CPU. Synth parts with nothing sounding are skipped, the reverb and short delay sleep when silent and one reverb buffer lives in internal SRAM.
  • A trimmed build (newlib-nano and -Os on UI and platform code) so 17 engines fit in the original's flash. The image is 1,030,080 bytes of 1,044,480 allowed.
  • Three out of bounds writes in the UI are fixed.

Not included: Polyend's DIRT and Shaping engines, because they exist only in Polyend's closed library. A project that uses an engine missing from the build gets that part reset to defaults on load.

Which devices

The original Polyend Tracker only. This is not built or tested for the Tracker+ or the Mini. For those use upstream tracker-ce.

Install

  1. Back up your Projects/ folder first. Upstream CE saves patterns in a newer format that older firmware cannot read.
  2. Copy PolyendTracker_FF_1.0.0.ptf to the /Firmware folder on the SD card.
  3. On the Tracker open Config > Firmware and select the file.

Do not rename the file. The original's bootloader lists only names that start with PolyendTrac.

Go back to stock

Flash the official Polyend firmware or the stock CE .ptf the same way: copy it to /Firmware, then Config > Firmware and select it.

Files

  • PolyendTracker_FF_1.0.0.ptf is the firmware.
  • PolyendTracker_FF_1.0.0.zip has the same .ptf plus LICENSE, NOTICE.md, licenses/, SHA256SUMS and a short readme. Use it if you want to pass the firmware on, because the license asks you to ship LICENSE and NOTICE.md with it.
  • SHA256SUMS has the checksums of the .ptf and the zip.

SHA-256 of the .ptf:

e064160057c42fde7d9655b38319165c8abefe955a37cb9f761c0f3df47f094c

License

Free and non-commercial. MIT with upstream's Wholesale Commercial Clone Restriction: you can use, share and modify it for free, but you may not sell builds or clones of it. tracker-ff is not affiliated with or endorsed by Polyend. Full license texts for this project and every bundled third party component are in the zip (LICENSE, NOTICE.md, licenses/).

Source and build instructions: https://github.com/sbialy/tracker-ff