Skip to content

Releases

tracker-ff 1.3.1

Choose a tag to compare

@sbialy sbialy released this 14 Nov 06:52

tracker-ff 1.3.1

Bugfix release on 1.3.0. Only the firmware image changes. The plugins and effects in the zip are the same as in 1.3.0.

Updating from 1.2.x? Unzip the whole zip onto the card, then flash. CHIP is a plugin since 1.3.0, so chip.plg and chip.plgi have to be in /Plugins/Synth/ on the card. The upgrade guide is also in the zip as tracker-ff/UPGRADING.md.

Install: unzip PolyendTracker_FF_1.3.1.zip onto the root of the SD card and flash PolyendTracker_FF_1.3.1.ptf (it lands in /Firmware/) from Config > Firmware > Firmware update. Check the zip with SHA256SUMS.

Fixed

  • A part on an engine that is not on the card (for example CHIP without chip.plg) can be switched to an installed engine again. 1.3.0 refused every change in the Model list of such a part with the not installed popup, so the part stayed stuck until the plugin was copied or another project was opened. Now the first step puts the list on a row and the engine of that row is picked after the list has rested for 1 s. The part keeps its stored engine and its patch files until then, the old patch is kept as <P>-b.patch, and copying the plugin back and picking that engine restores it.
  • The Macros and Automation pages of a part whose engine is not installed stay closed. The Params key shows the not installed popup and stays on the Synth page. Before, the pages opened and edits made there were lost.

tracker-ff 1.3.0

Choose a tag to compare

@sbialy sbialy released this 13 Nov 12:00

tracker-ff 1.3.0

Even if you skip every new feature, tracker-ff 1.3.0 takes about 30 % less audio CPU than CE on any project CE can play. USB audio is built in. tracker-ff is unofficial community firmware for the original Polyend Tracker, built on Polyend's open source tracker-ce. It is free, non-commercial and not affiliated with Polyend. Version 1.3.0 adds a Features page with USB audio, moves CHIP onto the card as a plugin, lets you hide and reorder the engine list, adds the Glue insert and brings a long list of audio CPU savings.

New to the chord and macro features? The user guide explains macro depth, paraphony, chord capture, record join and Strum. The Synth order guide explains how to hide and reorder engines.

Updating from 1.1.0 or 1.2.0? Read the upgrade guide first. It is also in the zip as tracker-ff/UPGRADING.md. The short version for 1.2.0: unzip the whole zip onto the card, because CHIP is a plugin now and needs chip.plg, then flash.

What is new in 1.3.0

  • USB audio. Built in. Switched on, the unit shows up as an audio input on a computer after the next start. Switched off, it presents only the stock USB interfaces.
  • Glue master insert. glue.plg, a bus compressor with Auto makeup and a Character setting: Clean, Glue, Smooth, Punch or Colour. Makeup reads Auto at the bottom step. There are eight inserts now. Glue and Phaser do not fit the insert memory together, the second of the two shows Full.
  • Paraphony. A synth plugin can now answer a chord query of the firmware, an optional extension of the plugin format that leaves older plugins alone. ACD is the one engine of this release that does. It has three new parameters at the end of its Voice section, Chord Mode (Poly or Para), Chord and Strum, stored per patch. In Para a MIDI Chord step plays its notes as one voice through one filter and one set of envelopes, which costs less audio CPU than a voice per note. Patches from 1.2.x load with Poly and sound as before. The patch Chord plays for notes from the pads, a MIDI keyboard and plain steps, and a MIDI Chord step FX wins for its own step (the same goes for Strum).
  • Chord capture. Play MIDI keys together with the cursor on a step in any column, or hold pads with the cursor on a MIDI Chord cell, and the Tracker writes the chord into the step. A popup at the cursor shows the chord name and the held notes. A ~ before the name marks a near match. One Undo takes the chord back. The title bar and the popup show the chord with its root and bass such as Fmaj7/C, and the Fill list shows the name without a root such as maj7 inv2. MIDI Chord values above 29 (the inversions) play only the bass note on stock firmware, so a project with captured inversions sounds thinner there.
  • Strum FX. u - Strum next to a MIDI Chord starts the chord notes one after another, upwards for 1 to 63 and downwards for 65 to 127, 2 ms apart per unit. The notes start on audio blocks, so +10 is about 20 ms. A Para ACD patch strums inside its voice.
  • Record join. Notes you play together while recording are written as one step with a MIDI Chord. With several tracks armed the chord joins onto the track under the cursor.
  • Synth order. Shift + F1 on the Model column of the Synth screen opens an edit mode for the engine list. Shift + Up and Down move an engine, Delete hides it and Insert shows it again. The order is saved in /Plugins/synth-order.txt. Projects and .patch files are not affected, an engine that the open project plays still shows at the top even when hidden.
  • Macro depth Scale. A new patch scales a macro amount to the room between the parameter value and its end, so an Amount of 1.00 reaches the maximum and -1.00 the minimum. The Amount is shown from -2.00 to 2.00, and 1.00 is 100 %. Patches from 1.2.x keep the old rule. The mode is stored per patch. The unit has no row to switch it yet.
  • Features page. Config > Features lists the options that need a restart or a switch of their own. Each one has a State row and a page with its settings, kept in /Features/ on the card. A feature that needs a restart offers Restart now. The page lists USB audio and Chord names. Reset config clears the folder.
  • Note-on admission. A synth note whose estimated cost would push the audio block over its time budget starts at the start of the next block. It is at most one block late and never dropped. A voice that a new note takes over fades out in the block of the note.
  • Sample input chain idles. The USB input stream of the original sends no data, and a gate whose mixer inputs are silenced builds no output block, so an unused input chain costs less audio CPU. The output is unchanged.
  • CHIP is an installable engine. CHIP is chip.plg in /Plugins/Synth/, one of the thirteen plugin engines. The sound, the parameters and the numbers are unchanged, so old projects and .patch files open on it as before. It frees about 15 KB of flash. A CHIP part shows Missing: CHIP on a card without the plugin and keeps its settings.
  • Patch FX applies macros and automation. O - Patch now applies the macros and the automation of the slot it switches to, together with its values. An LFO or envelope that sits on the same slot type in both patches keeps running, one that changes type starts new.
  • Model list rest. Every step onto another engine in the Model list waits 1 s on the engine before it is loaded, built-in engines included, so scrolling does not pick every engine on the way.
  • Lower audio CPU. The short delay runs only the lines of the mode that is on. The reverb loop runs at half rate with the same room size, damping and decay time and lives in internal SRAM, so its 32 KB SDRAM buffer is gone. The limiter, the sample voice loops and the sequencer clock are cheaper. All of these give the same output bit for bit, except the delay mode switch below.
  • Master insert 2 runs from internal memory. Both inserts run from one 8 KB SRAM slot, so insert 2 no longer writes to the data flash. A plugin that fits alone but not beside the other shows Full:<name> and loads when the other leaves room. The synth plugin bank takes the two freed sectors.
  • Short delay mode switch. Switching between mono and ping pong with echoes ringing crossfades over about 90 ms and carries the echoes over. Before, it cut to unrelated echoes with a click.

Sample editor effects

  • Transient Shaper has new envelope times, and its Sustain gain is held back while a hit is rising.
  • Fourteen .ptfx effects in all, in /Effects/. The unzip replaces your old ones.

Workflow

  • Add to Empty Slot. With files selected in the Sample Loader, Shift with the add button adds the selection and does not jump to the first empty slot. After a jump the instrument list and the memory bar refresh.

Fixes

  • Installing a synth plugin into the data flash no longer makes the audio crackle. The audio output renders ahead into a deeper buffer while the flash erases, and the erase works in short slices.
  • The delay feedback and the reverb damping start the same way a project load sets them.
  • The master inserts of a project load wait like the synth engines do, so a project with inserts opens without a stall.
  • A part whose engine is not on the card (for example CHIP without chip.plg) keeps that engine. Its Model list shows the not installed popup and changes nothing. Before, one encoder click turned the part into ACD.

Known issues

  • A patch saved by 1.3.0 with a macro amount in Scale mode plays with the old Add rule on 1.2.x, so that macro sounds different there.
  • Macro depth mode cannot be switched on the unit yet.
  • Glue and Phaser do not fit together. The second of the two insert slots shows Full and passes the audio.
  • A part whose engine is missing (for example CHIP without chip.plg) still opens its Macros and Automation pages. Edits there are not kept.
  • 1.2.0 keeps at most 768 bytes of patch data it does not know. A patch saved by 1.3.0 with more than 765 bytes of such data does not load on 1.2.0. Normal patches carry 8 to 52 bytes.
  • The first time you pick a plugin engine, the Tracker copies it into its internal flash. In a busy project this can still cause a short audio gap, much shorter than in 1.2.0. Switching to an engine that is already loaded is silent.
  • Shift + Power screenshots can occasionally freeze the Tracker. Hold the power button to switch it off and on again.

One download

The release is the zip. The firmware image PolyendTracker_FF_1.3.0.ptf is inside it under Firmware/. The name has 27 characters and the bootloader reads at most 31, so do not rename it. The plugin files in the zip belong to this image.

Made for the original Tracker

tracker-ff targets the original Polyend Tracker and nothing else. Every engine, plugin, the voice pool and the governor are tuned to fit its flash, RAM and CPU. The Tracker+ and the Mini already have Polyend's synths, so on those use upstream tracker-ce.

How to flash

  1. Back up your Projects/ folder first. Upstream CE saves patterns in a newer format that older firmware cannot read.
  2. Unzip the whole PolyendTracker_FF_1.3.0.zip onto the root of the microSD card. It has no wrapper folder: Firmware/, Plugins/Synth/, Plugins/Master/ and Effects/ are laid out like the card.
  3. Put the card in the Tracker and open Config > Firmware > Firmware update. Select PolyendTracker_FF_1.3.0.ptf and confirm.
  4. Wait for the Tracker to flash and restart. Config > Info > About then says tracker-ff 1.3.0.

Without the plugin files from the zip, pr...

Read more

tracker-ff 1.2.0

Choose a tag to compare

@sbialy sbialy released this 09 Nov 13:05

Plugins, synth automation and more sample effects for the original Polyend Tracker. tracker-ff is unofficial community firmware, built on Polyend's open source tracker-ce, that gives the original Tracker synth engines of its own, made for its hardware and its memory. Version 1.2.0 moves most engines and a new set of master effects onto the SD card as plugins, adds an automation page to the synth, brings seven new sample editor effects, runs the synth maths faster and picks up three community features from tracker-ce forks.

Re-issued on 2026-11-09. The first 1.2.0 build could hang at the end of power off, with the screen on and every key dead. This build switches off every time. If you flashed 1.2.0 before this note, flash PolyendTracker_FF_1.2.0.ptf again. The first build has a checksum that starts with 02be31c5, this one starts with a165597f.

What is new in 1.2.0

  • Master insert plugins. Two insert slots process the master bus after the track mixers and before the limiter. Seven inserts ship with the release: Dirt, Tape, Lo-Fi, Console, Tube, BBD and Phaser. Copy the .plg files to /Plugins/Master/ on the SD card. Press the Master button to cycle Master, Track Mixer, Global Mixer and then the new Inserts page, which appears as soon as a plugin is on the card. Shift + Saturation on the Master screen opens it directly. Columns 2 and 3 pick the plugin for insert 1 and insert 2 (Delete empties a slot) and columns 4 to 7 are the parameters of the focused insert, four at a time. The page lists up to 272 inserts and rescans the folder only when its contents changed. A project names its inserts by id and name and not by list position, so adding or removing plugin files never changes which insert a project uses. The settings are saved with the project in a small plugins.txt next to it.
  • Mixer stage and Soft Knee. The first column of the Inserts page picks the stage that the track mixers run through before the inserts: Hard Clip, Soft Clip or the new Soft Knee. Soft Knee leaves everything below -3 dBFS untouched and rounds off the peaks above it. Soft Knee is also a new entry in the Saturation list. A project that uses it opens on older firmware with Hard Clip.
  • Dirt is now a plugin. The five built-in Dirt entries of 1.1.0 are gone from the Saturation list. Dirt is dirt.plg with Type, Drive, Bits, Rate, Tone and Mix. A project saved with a 1.1.0 Dirt entry opens with Dirt in insert 1 at the same values when dirt.plg is on the card.
  • Synth engines as plugins. Six engines are built in: ACD, FAT, VAP, WTFM, PERC and CHIP. The other twelve are plugins in /Plugins/Synth/: JU6, PHZ, FM4, D-Type, CS-Type, A-Type, T-Type, 8-Type, Hand-Type, B-Type, Arc-Type and PLK. They show up in the synth model list like any other engine, with their card logos. When the list rests on a plugin engine for half a second it is installed into the Tracker's data flash and the popup Loading <NAME> appears. A project load installs the engines it needs. The synth library takes as many plugins as the card holds, up to 249 engines. Engine numbers, patch files and slots are the same as in 1.1.0, so old projects and patches find their engines. A part whose engine file is not on the card shows Missing: <NAME> and keeps its settings. Hand-Type and PLK are new in this release. PLK is a plucked-string engine (Karplus-Strong). Besides the string settings it has Vel Bright, which makes louder notes brighter, and Body, which adds the resonances of a guitar body. Both start at 0, which is the plain string sound.
  • Synth Automation. The Params button now cycles three Synth pages: Synth Parameters, Synth Macros and Synth Automation. Each patch has four automation slots. A slot is Off, an LFO or an envelope, and it drives one engine parameter or one macro. Pick the slot in column 1 and the destination in column 2. An envelope has Attack, Decay, Sustain, Release and Amount. An LFO has Shape, Speed and Amount. The automation is saved in the .patch file of the open slot, so each of the 16 patch slots has its own. Patches without automation save exactly as before. Older tracker-ff firmware still loads a patch with automation, plays its sound without the automation and keeps the automation data when it saves the patch.
  • Lower audio CPU. The synth engines are compiled for speed and use faster floating point maths. Most engines need up to about 15 percent less audio CPU than in 1.1.0, which leaves more room for voices, inserts and automation.
  • Safe plugin loading. Before a plugin starts, the Tracker leaves a marker on the card. If a plugin ever crashes the Tracker, the next start loads no plugin by itself and the Inserts page names the one that crashed. Holding Shift during the first 4 seconds after power on does the same. Picking a plugin by hand still works.

Sample editor effects

Copy .ptfx files to /Effects/ on the SD card and they appear in the Sample Editor effect list. They run when you press Preview or Apply and cost no firmware space.

  • Transient Shaper with Attack and Sustain from -12 to +12 dB. At 0 and 0 the sample is left bit for bit as it was.
  • Six OpenTracker effects: Tape Saturation (Drive, Wow, Flutter, Mix), Lo-Fi Chip (Bits, Rate, Ladder, Speaker, Mix), Dirt Drive (Type, Drive, Bits, Rate, Tone, Mix), BBD Chorus (Mode, Tone, Mix, Tail), Dub Echo (Time, Fdbk, LowCut, Tone, Duck and Tail) and Reverb (Size, Damp, Predly, Diffus, Mix, Tail). Dub Echo, BBD Chorus and Reverb have a Tail option: Ring Out lets the echo or reverb die away past the end of the sample and Cut Off stops at the sample end.

Workflow

  • Add to Empty Slot. In the Sample Loader hold Shift over a file and the Add button turns into Add to Empty Slot. Press it and the sample goes into the first free instrument slot and the cursor moves there. With all 48 slots in use a popup says so and nothing is added. Without Shift, folders and multi-selection nothing changes.
  • Per-track MIDI-in. Config > MIDI has eight new items, Track 1 to Track 8 in channel, each Off or CH1 to CH16. In the pattern editor, notes on that channel play on the track's voice with the instrument last used on that track (instrument N for track N if there is none). Put several tracks on one channel for polyphony. Notes on a channel no track listens on behave as before. Existing settings are kept and the new items start Off.
  • Sample Loader memory modes. Samples now load into RAM by default. A Mode button in the Sample Loader switches a sample between RAM and streaming from the card and the import page has an Import Stream button.
  • After a project load the Tracker switches to the pattern editor instead of staying on the File screen. Load errors still stay on the File screen.

Fixes

  • Power off always switches the Tracker off. Before, it could hang at the end with the screen on and every key dead.
  • The main loop and the display use less stack. This closes a case where a deep synth plugin together with an insert could run past the end of the stack.
  • 8-Type and T-Type keep their working buffers out of the audio interrupt stack. Before, 8-Type playing while the Tracker wrote to the card could in the worst case run past the end of the stack. Their sound is unchanged.
  • Dirt returns silence for silent input at low bit depths and no longer pushes a DC step when it switches to Asym.
  • Project settings of the plugins survive a failed card write or a power cut during a save, and a save that cannot write them now reports an error.
  • Wavetable and granular position modulation clamps at 0 instead of jumping to the end of the sample.
  • Performance mode end point changes follow sequencer mode 2.
  • An unreadable folder on the card no longer breaks the firmware and sample file lists.
  • The folder list of the Sample Loader no longer overruns its list when a folder cannot be read. The folder shows as empty with /...
  • A corrupt .it module file can no longer overflow the stack on import.
  • An out of range audio connection index is rejected instead of writing one element past the input queue.
  • The playhead stays inside backward, ping-pong and granular loops that are shorter than one pitch step. Before, the note turned into noise.
  • Song blocks smaller than 32 steps copy and paste correctly.
  • Synth FX performance control works from MIDI CC.
  • The m/V and FX1/FX2 views of the pattern editor are easier to tell apart.
  • A volume and tune bug and a redundant FX reset in the audio sequencer are fixed. The display, LED and file transfer code is faster.
  • The CHIP engine no longer overloads the audio interrupt with many voices.
  • A short heap no longer makes an allocation return null into a write. Big synth blocks come from the external memory, so changing the engine of a synth part works on a full heap, and project load, recording save, folder lists and the synth editor value lists check the result.
  • The synth patch editor refuses a parameter or macro index outside the patch.
  • Taking a screenshot with Shift + Power after visiting the Synth Parameters page could crash the Tracker.
  • Changing the synth engine of a part repeatedly could crash the Tracker.

Known issues

  • The first time you pick a plugin engine, the Tracker copies it into its internal flash. In a busy project this can cause a short audio crack. Switching to an engine that is already loaded is silent.
  • Shift + Power screenshots can occasionally freeze the Tracker. Hold the power button to switch it off and on again.
  • The O - Patch step FX switches a part to the sound of another patch slot, but keeps the macros and the automation of the slot that is open on the Synth screen. To hear a slot with its own macros and automation, select it on the Synth screen.

One image

There is one .ptf: PolyendTracker_FF_1.2.0.ptf. The name has 27 characters and the bootloader reads at most 31, so do not rename it.

Th...

Read more

tracker-ff 1.1.0

Choose a tag to compare

@sbialy sbialy released this 05 Nov 19:05

tracker-ff 1.1.0

Synth engines and per-step patch switching for the original Polyend Tracker. Polyend's synths run only on the Tracker+ and the Mini. tracker-ff is unofficial community firmware, built on Polyend's open source tracker-ce, that gives the original Tracker 16 engines of its own, made for its hardware and its memory. It goes one step further than the Tracker+: every synth part holds 16 patches and a pattern can switch between them on any step, so one instrument can change its sound mid-pattern.

What you get on top of tracker-ce

  • Patch slots and the Patch FX. Every synth part keeps a bank of 16 patches in the project. The O - Patch step FX switches the part to one of them at a step, so a pattern can change the sound of an instrument. The slot selector is on the Synth screen. Slot 0 is the usual <N>.patch, so stock firmware opens the song with that sound and ignores the other slot files. Saving a project never deletes slot files from it, so a slot you clear comes back the next time you open the project.
  • 16 synth engines. ACD, FAT, VAP, WTFM, PERC, CHIP, JU6, PHZ, FM4, D-Type, CS-Type, A-Type, T-Type, 8-Type, B-Type and Arc-Type, playable as synth instruments in any project. ACD, FAT, VAP, WTFM and PERC are clean-room engines from OpenTracker (Apache-2.0). JU6, FM4, D-Type, CS-Type, A-Type, T-Type, 8-Type, B-Type and Arc-Type come from opentracker-synths by Marcin Spoczynski (MIT). CHIP is Polyend's own open Chiptune voice from tracker-ce. PHZ is a phase distortion engine written for this project from Polyend's public Synth manual.
  • Polyphony. Each synth instrument has up to 4 voices from a shared voice pool. A governor drops voices when the audio load gets too high, so the Tracker never stalls. Idle audio CPU stays low.
  • Patches. .patch files load and save from Patches/<ENGINE>/ on the SD card.
  • Slot names. Each slot keeps its name when you move to another slot and back, and after saving and reloading the project. The names live in a small <N>.names text file next to the slot files.
  • Engine changes keep your sound. Switch a synth part to another engine and back and the slot 0 patch and its name come back. Slots 1 to 15 keep their names.
  • Safe patch saves. A slot file is replaced through a backup copy. If the card fails or the power drops halfway, the old patch loads next time. A save that fails shows an error.
  • Pitch bend works from MIDI and from the Micro-tune FX.
  • Dirt master insert. Dirt (drive, fold, bitcrush) runs live on the master bus before the limiter. Pick Dirt Soft, Dirt Hard, Dirt Fold, Dirt Asym or Dirt Crush in the Saturation entry of the master screen. The presets are fixed, so there are no parameters to edit. Drive is 15 on Crush and 35 on the other four. It costs about 1.6 to 2.6 points of the audio block and nothing in silence. Based on opentracker-fx by Marcin Spoczynski (MIT).

Made for the original Tracker

tracker-ff targets the original Polyend Tracker and nothing else. Every engine, the voice pool and the governor are tuned to fit its flash, RAM and CPU. The Tracker+ and the Mini already have Polyend's synths, so on those use upstream tracker-ce.

How to flash

  1. Back up your Projects/ folder first. Upstream CE saves patterns in a newer format that older firmware cannot read.
  2. Copy PolyendTracker_FF_1.1.0.ptf to the /Firmware folder on the microSD card. Keep exactly one visible .ptf file in that folder, and delete or move any other one.
  3. Put the card in the Tracker and open Config > Firmware > Firmware update. Select the file and confirm.
  4. Wait for the Tracker to flash and restart.

Do not rename the file. The original's bootloader lists only names that start with PolyendTrac and are at most 31 characters long.

If it does not boot

  1. Put a known good .ptf in /Firmware on the card, with no other .ptf there. Use the official Polyend firmware or the stock CE image.
  2. Insert the card and power the Tracker on.
  3. Press the recessed reset pinhole on the bottom of the Tracker with a paperclip or a SIM eject pin.

The hardware bootloader picks up the file from /Firmware and flashes it.

Go back to stock

Flash the official Polyend firmware or the stock CE .ptf the same way: copy it to /Firmware, then Config > Firmware > Firmware update and select it.

Files

  • PolyendTracker_FF_1.1.0.ptf is the firmware.
  • PolyendTracker_FF_1.1.0.zip has the same .ptf plus LICENSE, NOTICE.md, licenses/, SHA256SUMS and a short readme. Use it if you want to pass the firmware on, because the license asks you to ship LICENSE and NOTICE.md with it.
  • SHA256SUMS has the checksums of the .ptf and the zip.

SHA-256 of the .ptf:

122be7c730c44c197a9bf7141c03884b22072ece3ffec664ada87f2ec56b2c2a

License

Free and non-commercial. MIT with upstream's Wholesale Commercial Clone Restriction: you can use, share and modify it for free, but you may not sell builds or clones of it. tracker-ff is not affiliated with or endorsed by Polyend. Full license texts for this project and every bundled third party component are in the zip (LICENSE, NOTICE.md, licenses/).

Source and build instructions: https://github.com/sbialy/tracker-ff

tracker-ff 1.0.0

Choose a tag to compare

@sbialy sbialy released this 04 Nov 20:06

tracker-ff 1.0.0

Unofficial community firmware for the original Polyend Tracker (the MK66 model). It is a fork of Polyend's open source firmware tracker-ce and adds 17 synth engines to the original, which upstream has only on the Tracker+ and the Mini.

What you get

  • 17 synth engines in one image: ACD, FAT, VAP, WTFM, PERC, CHIP, JU6, PHZ, FM4, D-Type, CS-Type, A-Type, T-Type, 8-Type, Hand-Type, B-Type and Arc-Type. Most come from OpenTracker and opentracker-synths. CHIP is Polyend's own open Chiptune voice. PHZ is a phase distortion engine written for this project from the public manual.
  • Up to 4 voices per synth instrument, a shared voice pool (default 4, at most 8) and a governor that drops voices when the audio load gets too high.
  • .patch files load and save from Patches/<ENGINE>/ on the SD card. Pitch bend works from MIDI and from the Micro-tune FX.
  • Lower idle audio CPU. Synth parts with nothing sounding are skipped, the reverb and short delay sleep when silent and one reverb buffer lives in internal SRAM.
  • A trimmed build (newlib-nano and -Os on UI and platform code) so 17 engines fit in the original's flash. The image is 1,030,080 bytes of 1,044,480 allowed.
  • Three out of bounds writes in the UI are fixed.

Not included: Polyend's DIRT and Shaping engines, because they exist only in Polyend's closed library. A project that uses an engine missing from the build gets that part reset to defaults on load.

Which devices

The original Polyend Tracker only. This is not built or tested for the Tracker+ or the Mini. For those use upstream tracker-ce.

Install

  1. Back up your Projects/ folder first. Upstream CE saves patterns in a newer format that older firmware cannot read.
  2. Copy PolyendTracker_FF_1.0.0.ptf to the /Firmware folder on the SD card.
  3. On the Tracker open Config > Firmware and select the file.

Do not rename the file. The original's bootloader lists only names that start with PolyendTrac.

Go back to stock

Flash the official Polyend firmware or the stock CE .ptf the same way: copy it to /Firmware, then Config > Firmware and select it.

Files

  • PolyendTracker_FF_1.0.0.ptf is the firmware.
  • PolyendTracker_FF_1.0.0.zip has the same .ptf plus LICENSE, NOTICE.md, licenses/, SHA256SUMS and a short readme. Use it if you want to pass the firmware on, because the license asks you to ship LICENSE and NOTICE.md with it.
  • SHA256SUMS has the checksums of the .ptf and the zip.

SHA-256 of the .ptf:

e064160057c42fde7d9655b38319165c8abefe955a37cb9f761c0f3df47f094c

License

Free and non-commercial. MIT with upstream's Wholesale Commercial Clone Restriction: you can use, share and modify it for free, but you may not sell builds or clones of it. tracker-ff is not affiliated with or endorsed by Polyend. Full license texts for this project and every bundled third party component are in the zip (LICENSE, NOTICE.md, licenses/).

Source and build instructions: https://github.com/sbialy/tracker-ff