Repository navigation
Releases
ZeroSend 0.2.1
Faster, tear-free screen and every key the CardputerZero prints. Measured on a real CardputerZero.
Changes since 0.2.0
- Tab switches 3-5x faster: 35-57 ms from key-down to the new frame, down from 180-275 ms. The app no longer forces a full panel refresh after every partial redraw (on the CP0's DRM-backed framebuffer each forced refresh is a mode-set plus a full SPI push) and draws each frame in one pass. LVGL's per-call object assertion is off, the glyph cache is larger, and rendering uses two threads with NEON blending.
- Sym keys type what they show: sym+B now types
., sym+V,, sym+N/, sym+M?, and the rest of the blue legends (- + = [ ] { } ; : ' " < > \ | ~ _and! @ # $ % ^ & * ( )). The keyboard driver sends spare keycodes for these; they're translated for the built-in keyboard only, so a USB keyboard keeps its normal layout.
Install
sudo apt install ./ZeroSend_0.2.1_m5stack1_arm64.debZeroSend 0.2.0
First release tested on a real CardputerZero (stock image, Debian 13 trixie, APPLaunch 0.6.110).
Verified on the device
- Starts from the launcher; draws on the RGB565 panel; keyboard, including Shift and punctuation
- Battery, charging and Wi-Fi indicators in the title bar
- Finds the official LocalSend app by multicast, sends text, receives files intact (SHA-256 checked)
- Holding Esc to quit stops both the app and its network daemon
- About 15 MB of RAM for the app and daemon together
Changes since 0.1.1
- The packaged (disabled) systemd unit runs as uid 1000 instead of a user named
pi, which doesn't exist on devices set up through the first-boot wizard - README: hardware results, and install examples for any username
Install
scp ZeroSend_0.2.0_m5stack1_arm64.deb <user>@<hostname>.local:/tmp/
ssh <user>@<hostname>.local 'sudo apt install /tmp/ZeroSend_0.2.0_m5stack1_arm64.deb && systemctl --user restart APPLaunch.service'Hold Esc for 3 seconds to quit. Not in the CardputerZero AppStore. Unofficial; not affiliated with LocalSend.
Known limits
- The
-and=keys don't reach the app yet (the keyboard reports non-standard codes for them) - Receiving works only while the app is open
ZeroSend 0.1.1 (pre-release, untested on hardware)
ZeroSend now follows the network when Wi-Fi comes and goes.
Warning
Pre-release, not yet tested on a real CardputerZero. Built and tested in the
device-configuration build (fbdev, evdev, arm64 Debian trixie), like 0.1.0. See
Status.
Fixed
LocalSend's core binds device discovery to the network interfaces that exist when it starts, and
never again. In 0.1.0 that meant:
- Opened before Wi-Fi connected: no IP shown, and nearby devices could not find ZeroSend
even once Wi-Fi was up, until the app was restarted. - Wi-Fi dropped: nothing changed on screen. It still said Ready with the old address.
- Wi-Fi came back: discovery most likely stayed deaf until a restart.
0.1.1 re-reads the network every 3 seconds. It shows No network instead of Ready while
there is none, and restarts discovery by itself when the network changes.
Also new: a transfer whose other device walks away mid-way is flagged Stalled after 15
seconds without data, instead of a progress bar frozen on its last speed. Press Esc to cancel it.
Install
From a computer on the same network as the CardputerZero:
scp ZeroSend_0.1.1_m5stack1_arm64.deb pi@cardputerzero.local:/tmp/
ssh pi@cardputerzero.local 'sudo apt install /tmp/ZeroSend_0.1.1_m5stack1_arm64.deb &&
systemctl --user restart APPLaunch.service'It upgrades 0.1.0 in place. Pairings and settings are kept. Or over USB: set the USB switch to the
left, enable ADB in Settings → Developer, adb push the file to /tmp/, run the same
apt install in adb shell, and reboot.
Package: zerosend 0.1.1-m5stack1, arm64, for the CardputerZero's Debian trixie image.
Check the download against ZeroSend_0.1.1_m5stack1_arm64.deb.sha256.
ZeroSend 0.1.0 (pre-release, untested on hardware)
First public build of ZeroSend: LocalSend for the M5 CardputerZero.
Warning
Pre-release, not yet tested on a real CardputerZero. It runs in the desktop simulator and in a
device-configuration build (fbdev, evdev, arm64 Debian trixie) against the official LocalSend
apps, which is where this .deb was built and tested. Real hardware may need fixes, most likely
the framebuffer (/dev/fb0 vs /dev/fb1) and the keyboard's symbol keys. See
Status.
What works: discovery both ways with LocalSend on Android, iOS, macOS, Windows and Linux;
sending and receiving files, folders and text; accept / decline / always trust; Quick Save;
Receive / Send / Settings tabs. It receives while the app is open.
Install
From a computer on the same network as the CardputerZero:
scp ZeroSend_0.1.0_m5stack1_arm64.deb pi@cardputerzero.local:/tmp/
ssh pi@cardputerzero.local 'sudo apt install /tmp/ZeroSend_0.1.0_m5stack1_arm64.deb &&
systemctl --user restart APPLaunch.service'APPLaunch is a user service of the pi account (hence --user, no sudo) and reads launcher
entries only at start. Or over USB: set the USB switch to the left, enable ADB in Settings →
Developer, adb push the file to /tmp/, run the same apt install in adb shell, and reboot.
ZeroSend then appears in the launcher; hold Esc for 3 seconds to quit it. Tested against
APPLaunch 0.6.105, the launcher in the current (2026-09-29) CardputerZero image. It isn't in the CardputerZero AppStore. Remove it with
sudo apt remove zerosend.
Package: zerosend 0.1.0-m5stack1, arm64, for the CardputerZero's Debian trixie image.
Check the download against ZeroSend_0.1.0_m5stack1_arm64.deb.sha256.