v3.3.0

This is a major maintenance release, adding and improving support for a list of lab devices such as power supplies, electrometers, climate chambers, and more (see changes below).

Thanks to all contributors, keep the PRs coming!

What's Changed

• Support for cocotb-bus 0.2.0 by @cbespin in #167
• Allow optional, device-specific formatting of SCPI query return strings by @leloup314 in #168
• FIX: remove NTC temperature logging by @lschall in #171
• UPD: SignatoneProber driver by @Marrkson in #165
• Add option to pass build arguments to verilator by @cbespin in #173
• ADD: lab devices example for Keithley 2410 with formatting by @leloup314 in #174
• Add HP 4284A LCR meter to basil by @leloup314 in #169
• Improved LCR-meter interface by @leloup314 in #176
• Add PSU Rohde & Schwarz HMP4040 PS by @s6thseng in #177
• Keithley 6517a electrometer by @SinuoZhang in #178
• Arduino Utils by @leloup314 in #179
• ENH: better API for NTCReadout allowing to get/set all needed quantit… by @leloup314 in #180
• Tektronix simplify by @Marrkson in #181
• Binder mk56 by @Marrkson in #182
• Fix flake8 by @leloup314 in #183
• ENH: allow to set voltage divider configuration for new NanoUtilBoard by @leloup314 in #184
• FIX: X-ray Debyeflex 3003 driver by @MarcoVogt in #186
• ISEG HV Power Supplies by @leloup314 in #187
• Agilent33250a.py fix by @dschuechter in #191
• ENH: change default value according to new NanoUtilBoard PCB by @leloup314 in #192
• agilent_33250a.yaml addded missing commands by @dschuechter in #193
• PRJ: Added support for Tektronix TDS3034B by @dschuechter in #194
• ADD: SentioProber driver for use in Hong Kong by @Marrkson in #195
• Add cross point switch HL for EOS and QMS card by @matthias-schuessler in #190
• new julabo fp50 by @AntonioT7 in #189
• Rs hmp4040 for bdaq by @matthias-schuessler in #196
• FIX: fix codecov, #199 by @leloup314 in #200
• ENH: Added lots of commands to agilent_33250a.yaml by @dschuechter in #198
• Keithley 6517A improvements by @leloup314 in #201
• Keithley 6517A fixes by @leloup314 in #203
• ENH: Adds support for keithley 2470 by @konstantinmauer in #206
• ENH: Add __scpi_query_fmt to Keithley 2470 by @konstantinmauer in #207
• Update keithley_2400.yaml by @konstantinmauer in #212
• ENH: Adds function to keithley2400 to return set source current and v… by @matthias-schuessler in #215
• Update workflows by @YannickDieter in #208
• Keithley 2634b by @matthias-schuessler in #214
• ENH: get_die now outputs the unmodified die position from the prober api by @mjmucha in #218
• ADD: Automatic finding of USB binds based on instrument IDN by @mjmucha in #210
• serial and visa baud rate init parameter compatibility by @mjmucha in #209
• ADD: Arduino environment/analog readout hardware layer by @mjmucha in #211
• Improvements for mercury driver by @SilasM2001 in #213
• Fix deprecation errors/warnings by @cbespin in #225
• Fix firmware compilation error by @cbespin in #223
• Small refactoring changes to USBBinds.py by @mjmucha in #226
• Fixing motorstage by @SilasM2001 in #227
• Bugfixes for automatic port identification by @matthias-schuessler in #229
• MAINT: Prevent OverflowError in multiplication by @magruber in #230
• FIX: deprecation warning, new assignment syntax by @cbespin in #232
• ADD: added get_source_voltage command by @mjmucha in #228
• ENH: Simplified FW build procedure by @MarcoVogt in #233
• Add new Julabo Magio MS-1000F chiller to basil by @matthias-schuessler in #236
• Refactored iseg hardware layer by @mjmucha in #234
• Flowmeter by @YannickDieter in #220
• ADD: FIFO_8_64 & FIFO_64_16 by @Marrkson in #172
• Add requirement introduced in #233 by @cbespin in #239
• Use board number instead of address in the Mercury class by @Giakou in #238
• Fix bitarray.endian() by @cbespin in #242
• Adding firmware for Grove 4-channel relay by @matthias-schuessler in #241
• Fixes for Cocotb v2 by @MarcoVogt in #250
• Update workflow by @cbespin in #251
• Fix generic_fifo naming and pointer size in Vivado >= 2024 by @cbespin in #247
• Pyproject toml by @rpartzsch in #244
• Fix pointer size for BRAM FIFO by @cbespin in #252
• Reduce number of bits for address pointer by @cbespin in #253
• 254 padeken fix generic fifosx by @padeken in #255
• Added optional HW dependencies by @rpartzsch in #256
• Included more Python Versions in CI by @rpartzsch in #258
• ENH: Fast TDL TDC by @MarcoVogt in #231
• Update firmware.rst by @cbespin in #259
• Bring the docs back to life by @kcaisley in #260
• docs: add sphinx-book-theme to requirements by @kcaisley in #262
• docs: fix graphviz rendering and bus timing diagrams by @kcaisley in #263
• Unify usage of POINTER_SIZE across modules by @cbespin in #265
• Code Style: pre commit by @rpartzsch in #266
• Fix port width of wrapper in generic_fifo by @cbespin in #269
• Stretch TDC input signal by @cbespin in #271
• Include missing firmware READMEs by @kcaisley in #273
• Documentation, formatting, and linting for several modules: seq_gen, fast_spi_rx, gpio, spi, pulse_gen by @kcaisley in #272
• Update pyproject.toml by @kcaisley in #276
• Fix redundant dependencies that might break builds by @cbespin in #277
• feature(firmware): cdc fifo with inferred BRAM by @cbespin in #279
• Fix spi bram by @kcaisley in #280
• Banish the ghost of codecov by @kcaisley in #283
• Update bdaq53 names to bdaq core in examples by @kcaisley in #284
• Ping available I2C address by @rpartzsch in #282
• ADD: Add support for sensirion SHT4x family of sensors by @matthias-schuessler in #281
• Add Basil bus checker by @kcaisley in #275
• Implement StdRegister readback by @kcaisley in #285
• Adjust width of TDL TDC timestamp in Python driver by @cbespin in #270
• Fix last remaining old-style RAM type description by @cbespin in #286
• Use install extra for CI tests by @cbespin in #287
• Add pathlib.Path as config option in Dut by @cbespin in #288
• Add testing for python 14, and bumping icarus and verilator sim by @kcaisley in #291
• Removed logging basic config write by @rpartzsch in #292
• Pypi release 3.3.0 by @cbespin in #293

New Contributors

• @cbespin made their first contribution in #167
• @leloup314 made their first contribution in #168
• @lschall made their first contribution in #171
• @s6thseng made their first contribution in #177
• @SinuoZhang made their first contribution in #178
• @dschuechter made their first contribution in #191
• @matthias-schuessler made their first contribution in #190
• @AntonioT7 made their first contribution in #189
• @mjmucha made their first contribution in #218
• @SilasM2001 made their first contribution in #213
• @magruber made their first contribution in #230
• @Giakou made their first contribution in #238
• @rpartzsch made their first contribution in #244
• @padeken made their first contribution in #255
• @kcaisley made their first contribution in #260

Full Changelog: v3.2.0...v3.3.0