Skip to content

SlicerX engine 0.2.4

Choose a tag to compare

@github-actions github-actions released this 27 Oct 05:08
· 2190 commits to main since this release

The sx, sx-geom and sx-link command line tools and libslicerx (the C ABI, with include/slicerx.h) for macOS (universal), Windows (x64) and Linux (x64). SHA256SUMS.txt has the checksums. The macOS binaries are signed with a Developer ID and notarized.

What changed since 0.2.3:

Fixes

  • Multi-filament plates with ironing on keep each object on its own filament. Before, a short object's ironing could leave the next layer of a taller object printing in the wrong filament.
  • PrusaSlicer projects that store 0% shrinkage open at their real size and slice. Before, they were refused as 10 to 100 times too big.
  • A skirt over the bed edge is cut at the edge with a note, the same as the brim. It's refused only when no full loop is left.
  • Layer heights above or below the printer's listed range print at the height you set. A height below 0.04 mm is refused with a message.
  • Each plate of a multi-plate project prints its prime tower where the project put it.
  • Spiral vases start their wall straight from the base, with no retraction or prime blob at the foot.
  • Wipes run at the layer's acceleration, and the timelapse lift on the A1 and A1 mini at the travel acceleration.
  • Tapering parts no longer leave an empty strip down the middle where the infill starts.
  • Leaning arachne walls slow down by the width of each bead.
  • Floating vertical shells on Bambu Lab printers no longer push into the inner wall.
  • First-layer and support widths set to 0 print at the right width, and so do overhang walls on printers other than Bambu Lab.
  • Single-wall parts, top surfaces and first layers keep full size with aegis walls. Tiny pins get a seam and seam gap. Round pegs and holes print closer to size.

Speed

  • Multi-filament plates and projects with painted seams slice faster.

Integrators

  • sx project-settings prints the settings a project file sets, and the request option projectDefaults applies the same project defaults the app uses.
  • The kit ships every setting's default.
  • Projects opened through the MCP by printer name print with that printer's start and filament change G-code.
  • A refused project G-code says it needs review and how to approve it.

Known issues

  • Ironing with a separate infill or top surface filament on one object can still put a layer on the wrong filament, on any printer. Ironing is fixed when separate objects use separate filaments. Until the next build, turn ironing off if you set a separate infill or top surface filament.
  • With "Prime tower no sparse layers" on, the first tool change after a skipped stretch prints its tower layer in the air, about 2 mm above the tower. Leave that setting off until the next build. It's off by default.

Desktop app 0.2.15

  • Ships the engine changes above.
  • At phone widths the toolpath legend's color chip sits under the view switch.
  • A click right after a view change on a slow computer lands where the new view shows it.