Repository navigation
Releases
SlicerX engine 0.2.10
Built from commit 984edc7.
The sx, sx-geom and sx-link command line tools and libslicerx (the C ABI, with include/slicerx.h) for macOS (universal), Windows (x64) and Linux (x64). SHA256SUMS.txt has the checksums. The macOS binaries are signed with a Developer ID and notarized. The integrator kit 0.2.10 ships with this release.
What changed since 0.2.9:
Exact CAD
sx-geomin every archive now has the exact kernel (SMLib, Apache-2.0), so exact designs run from the archive alone. Each archive carrieslicenses/SMLib-LICENSE.txtandlicenses/SMLib.txt; ship them with the binaries. The archives are a few MB bigger.slicerx_geom_shell1.5.0 shells an exact part with exact solids. The wall is the thickness asked at every point, on curved bodies too, and the part stays exact. A shell the kernel cannot close still runs on the mesh and says so.- Flat faces that a push, a hole or a tapered extrude moves onto a plane mesh with a longest edge, instead of long thin triangles.
- An exact part with a closed void, joined to a part that reaches into the void, meshes with the right volume. A 20 mm box with a 16 mm void and a bar through both walls used to mesh at 3997.3 mm3 against the part's 4424.0 mm3.
- Breaking:
slicerx_geom_hole2.2.0 only cuts a new hole. Changing an existing hole moved toslicerx_geom_hole_edit, which takes the old 1.3.0 input.slicerx_geom_edge_pick2.1.0 returnsloopRefandchainReffirst, and the per-edge lists only withlist_edges: true.
Slicing
- Mixed filaments: a project can mix two loaded filaments into one, printed layer by layer (a 2:1 mix prints A, A, B). Mixes take numbers 29 to 32. New tools
slicerx_project_mixed_filaments,slicerx_project_add_mixed_filament,slicerx_project_set_mixed_filament,slicerx_project_remove_mixed_filamentandslicerx_project_set_object_filament. - Bambu Lab H3C: the profile has the printer's own start, end, layer change, filament change, pause and time lapse G-code, and every tool change is checked against the rack, the docks and the purge chute. H3C estimates move. A project with the maker's newer end G-code (20261106) counts as stock.
- Bambu Lab H2C: tool changes on a plate printed by object are checked at the hotends they swap, by the filament map.
- A1: a plate with a part in the nozzle wrap corner slices instead of being refused with
collision. - A request plate whose objects all share their settings slices as one plate, as
sx slice <file.3mf>does, so tree support sees its neighbors. - Tree support stays clear of other objects on the plate, anchors each island on its own object, and reads the plain
tree_support_branch_*keys. New and off by default:organic_per_object. - Painted parts: side paint reaches the outline on every side, a painted part with a prime tower makes far fewer filament changes, and with no prime tower the layers above the paint print in the part's own filament. Project slices send every filament the paint uses.
- A part prints the same wherever it stands on the plate. Saved 3MF placements keep full precision.
- Sovol SV04 is a two extruder printer. New profile: Prusa Core One with INDX.
layer_heightabove what smart layer heights print gets a warning.
Engine stops
- A step that stops the engine says why, and the next call starts a fresh engine. A process killed from outside says "ended before it answered" instead of the deadline text, and a design replay it hit runs once more.
Read the sx-core, @slicerx/mcp and @slicerx/viewport changelogs for the rest.
SlicerX 0.2.18 (pre-alpha)
SlicerX 0.2.18 for testers. SlicerX is pre-alpha: expect rough edges, and slices can still differ from Bambu Studio and OrcaSlicer. Please report bugs in the SlicerX Discord or as GitHub issues.
Highlights:
- Prints on the Bambu Lab H3C give each filament its own tool, so color changes are tool swaps of about 4 s with no flush, and 2.85 mm TPU goes on the TPU tool. Setup now offers the H3C with the maker's settings for each nozzle
- Opening and slicing big projects use less memory, and big 3MF projects open faster
- Each plate of a 3MF project slices on its own plate type (the plate picker offers Textured Cool and Supertack plates), and projects can use up to 32 filaments, with paint on any of them and up to 8 AMS units in printer setup
- Sketches can import an SVG as editable lines, arcs and curves, trace a PNG or JPEG with Trace image, and project model edges, faces and outlines as curves that follow the model
- You can ask mimir for smooth lofts, rings, thickened shells, sweeps and spline outlines, and it builds a whole request after one Go
Slicing:
- With smooth timelapse on a Bambu Lab printer such as the A1, the prime tower prints on every layer (including layers that hold only support) and wipes the nozzle there after each shot, and Arrange leaves room for it
- Mixing filaments, such as PLA with TPU, no longer gives one filament another's temperatures
- Projects opened on a printer keep their own support gaps and other settings instead of taking the nearest quality preset's values
- Bambu Studio projects whose printer G-code reads settings SlicerX does not model now slice
- Where the brims of two objects on different filaments meet, the object on the lower filament keeps its full brim, and a brim cut short prints from the outside in
- Prusa projects print every brim loop that fits, print the first filament's brims first, merge brims that touch, and keep the brim's gap to the part with elephant foot compensation
- Prusa projects print their objects along one chain of the nearest objects, and the later of two overlapping parts in one filament prints its settings in the overlap
- PrusaSlicer projects print their first layer and percent widths as set, ramp travel lifts at the filament's angle, and slice with their own printer G-code when you choose it
- The Prusa MK4 and MINI with the 0.25 mm nozzle print the brim against the part, and their first layers use the stock line width and elephant foot compensation
- Narrow solid rings print lines where their corners have room instead of beads, stay steady from layer to layer, and stacked ring layers print as internal solid
- Bambu Lab monotonic line tops fill the small pockets at square corners and corners of 75 to 105 degrees and the open strip at sharp tips, with no stray gap fill
- Narrow first-layer strips on Bambu Lab printers print one full-width line down the middle and start their lines at one spacing
- Bambu Lab top surfaces no longer print stray gap fill bits at 60 degree corners such as the base of a triangle
- Classic walls with one wall on top fill the thin gaps beside inner walls, stepped and sloped parts and rounded corners, keep the first top line along a wall at any overlap, and no longer overfill flat tops at the wall
- Classic one-wall tops no longer leave small holes at the tips of slot ends, and print far less extra top surface along corner facets
- Sloped tops with aegis walls and one wall on top keep their full top surface band
- Thin parts on the elephant foot layers no longer print a stray gap fill line down their middle on Bambu Lab printers
- Smart layers: extra perimeters on overhangs, solid infill, top and bottom lines, classic walls and the first layer's bottom lines sit at the right spacing, and walls print at full width on thinner or thicker layers
- On the first layer, regions that share walls print one bottom surface across their boundary, and objects, modifiers and parts with their own settings print at the first layer line width
- Projects and profiles keep their fully clear overhang speed instead of printing those walls at the bridge speed
- Overlapping bridge areas no longer print twice, and the narrow solid beside a bridge over a ledge prints as internal solid infill
- Each filament can set its own Z hop height and type and its own travel slope, and projects keep per-filament values that use the printer's
- A modifier or part with its own wall or feature widths prints at those widths, and width percents set on a part of a Prusa project print right
- Models with many small sparse infill pockets slice faster, and slicing large models with one-wall tops and classic walls is faster
- Slicing with classic tree supports is faster, up to about 10x on some models
- A dual-head mirror refusal says which way to move the part: closer to the middle, or left of the middle when the heads would cross
Printers:
- On the Bambu Lab H3C you can see and pick which tool prints each filament, and the chamber temperature stops at 65 C
- H3C time estimates count the unload when a print starts on each new tool (about 28 s per extra filament), and H3C prime towers wipe each filament's own prime volume so multicolor prints use less filament and time
- H3C projects saved by Bambu Studio 2.9.1 open and slice, and H3C projects open in the app on the tools they set by hand
- Setup now offers the Prusa MK3.5, with the maker's settings for each nozzle
- The Ender-3 V3 uses its stock presets, including 0.5 mm first layer lines on the 0.6 mm nozzle
- Two-nozzle printers with different nozzle sizes get the right nozzle's size in their start G-code
- Printers with nozzles of two sizes show each object's nozzle in the object list, a click prints it with the other one, and the nozzle menu shows which filament each nozzle prints
- Home the printer from its Move tab, and see its firmware and each AMS's humidity and drying (also on the phone's printer screen)
- Printers with their own web page (Mainsail, Fluidd, OctoPrint, PrusaLink, Duet) have an Open web interface item that opens it in your browser
- You can pair a partner phone app in Settings, Printer bridge, Devices, choose what it may do, and revoke it. It works away from home and gets its own print alerts
- A paired partner phone app can approve your prints, pauses and skips, but never anything a partner app asked for, and it can't approve a card when SlicerX can't tell who asked for it
- Partner apps can ask to set an AMS slot, which changes only once you approve it, and a partner app's reason for a request shows on its card as the app's own words
- A connected app can ask for a filament change mid-print, and you approve it on its own card
Design and mimir:
- Typing a reply to one of mimir's questions counts as your answer, so "use the defaults" gets the part built instead of another question
- mimir finishes an approved plan when you tell it to keep going, and builds every part a message asks for after your Go, laying a lid flat beside its base
- Asking mimir for sizes opens the size sheet with suggested values, and big built parts open their sheet without a pause
- The mimir dimension sheet draws the part as it is built, with a numbered callout for every size, and round and bent parts get clean outlines
- Sizes you typed on a mimir size sheet are kept when you write to mimir instead of confirming it, and writing to mimir while a sheet waits sends your message and sets the sheet aside
- mimir notices when two shapes it joined only touch along an edge, and fixes the join before calling the part done
- mimir grows a hook out of a stem's side and ends it in a lip, so headphones and straps stay on
- mimir can build parts with smooth curved outlines drawn as splines through points, and builds lofted and swept parts instead of offering a simpler version
- Free mimir says right away when it hits its per-minute limit, with a See usage link, while it waits to carry on
- When a cut cannot be made, mimir says why in plain words instead of the engine's message
- mimir cloud has the slicing tools from the start, so more ways of asking it to print work
- mimir reads the layer height and other settings your plate really slices with, names printer, process and filament settings the way the settings dialogs do, and can change a filament's fan lead time
- You can answer mimir's questions from your paired phone while SlicerX is open on your computer, and you can cancel a question or type your answer instead
- mimir on a local model keeps the pattern, mirror and split tools, keeps more room for the conversation, and names only the tabs the app really has
- When mimir can't build a shape, it asks for sizes only after you pick a simpler version, and its choices include "nothing for now"
- mimir no longer asks for approval on a plain lookup or answer
- Lofts can be smooth or closed into a ring, and open profiles can be lofted or swept and thickened into a shell
- Shelling a curved body, like a lofted vase, takes about a third less time
- A swept handle bar joined to a post is no longer refused at some plate positions, and screw holes cut into it keep the part closed
- A merged circular array of a gear hub with a tooth on its wall now saves, in under a second
- Editing a design with a shell, push, fillet or chamfer no longer rebuilds those steps a second time
- An Extrude or Revolve that misses the body keeps the sketch open with the reason, and Undo after extruding a sketch with projected curves takes the solid and its sketch together
- Model no longer stops working when you undo the step that made a picked face
- Opening another sketch while Extrude works no longer closes it, and canceling a slow modeling step, such as a big merged array, frees the app for the next step
The app:
- If the desktop window's view crashes, it reloads and restores your unsaved work from the autosave, and tells you what, if anything, was lost
- Settings now show plain labels, such as "Brim follows elephant foot compensation" or G-code fl...
SlicerX engine 0.2.9
Built from commit f2d5854.
The sx, sx-geom and sx-link command line tools and libslicerx (the C ABI, with include/slicerx.h) for macOS (universal), Windows (x64) and Linux (x64). SHA256SUMS.txt has the checksums. The macOS binaries are signed with a Developer ID and notarized. The integrator kit 0.2.9 ships with this release.
What changed since 0.2.8:
Fixes
- A slice whose settings name no plate type takes it from the printer's
default_bed_typefor the bed temperatures, the preflight and thecurr_bed_typeplaceholder, and a plate's first layer temperature that is missing or 0 is its other layer temperature. Before, such a slice could start withM140 S0andM190 S0. - A plate check that was stopped stays stopped (
check_plate_until). Astopthat said so once and then took it back let the check skip moves and still return, so part of a check could read as a clear plate. sx-geom: a merged array of a big round part about its own axis finishes in milliseconds. A 70 mm disc in 12 copies took 3.7 s and a 70 mm ring in 30 copies took 27 s, and both were then refused as unsafe at storage precision. A ring made on the bed and stored in its own frame comes back from a merged array as one watertight shell.- Editing a design with a shell, push, fillet or chamfer no longer runs those steps a second time on the next replay. A shell on a lofted part takes 35 to 61 s, and a project replay paid for it twice.
- The MCP tools that use the server's own geometry engine stop each call at a time limit by kind of step: 30 s for measures, picks and previews, 3 min for building and joining solids, 5 min for work over a whole mesh. A call past its limit fails with the step's plain name and what to try. Before, every call had 5 minutes and a stopped one failed with "returned no JSON".
- A white-label edition's MCP server keeps its start-up compile cache under the edition's id instead of
slicerx. @slicerx/mcpshipsdist/LICENSE-GPL-3.0.txtbeside the LGPL text of the UltiMaker profiles it carries.
New
- The integrator kit ships a self-contained MCP server:
slicerx-mcp-standalone/and the same folder asslicerx-mcp-standalone.zip, listed inkit-manifest.jsonandSHA256SUMS.txt.node slicerx-mcp-standalone/slicerx-mcp.mjsruns with nonode_modules. Ship that folder instead of bundlingdist/cli.js. It carries its license texts (NOTICE,LICENSE-APACHE,THIRD-PARTY-LICENSES.txtand the profile licenses). The STEP reader stays the optionalslicerx-step-reader.tgz. slicerx_slice_file1.14.0 andslicerx_estimate_file1.11.0 takeplate_type: Textured PEI, Smooth PEI, Cool plate, Engineering plate, High temp plate, Textured cool plate or Supertack plate, in any letter case. The slice heats the bed for that plate and the answer gives the plate back. A name no plate has is refused withinvalid_input. Acurr_bed_typeoverride is still refused, and the message now points toplate_type.- A design moved onto the bed moves as a whole and keeps its own coordinates, so a step given after the move still meets the body. The design summary has
placedMm, how far those moves took it on the plate. The modeling, design, sketch and paint tools whose answers carry points or a design summary have new versions, and the@slicerx/mcpchangelog lists each one. - When a design's first body has no free spot on the bed, the designs moved there before that the person has not moved since are moved over to make room.
slicerx_design_undoof that step moves them back. slicerx_design_sketch,slicerx_design_sketch_svgandslicerx_design_trace_imagetakedesign, so a sketch is drawn in that design's coordinates and moves with it.slicerx_design_put_plan1.1.0 takeskindson each feature, andslicerx_app_sheet_ask1.2.0 takeskindon each row:count,angleorlength.slicerx_mimir_session1.4.0 gives each waiting size the unit the sheet shows it in, with the new valuecount.- Read the
sx-coreand@slicerx/mcpchangelogs for the rest.
SlicerX engine 0.2.8
The sx, sx-geom and sx-link command line tools and libslicerx (the C ABI, with include/slicerx.h) for macOS (universal), Windows (x64) and Linux (x64). SHA256SUMS.txt has the checksums. The macOS binaries are signed with a Developer ID and notarized. The integrator kit 0.2.8 ships with this release.
What changed since 0.2.7:
Fixes
- Classic walls with one wall on top fill more of the top surface. The top band starts at the inner wall's edge, ends half the outer wall in on flat tops, carries on past gradual falls and rounded corners of stepped slopes, keeps its first line along the wall at any overlap, fills the thin gaps beside inner walls, and gives full vertical shells under steps. Far less extra top surface prints along corner facets. Narrow grooves and slots under a step keep their inner wall.
- Aegis walls with one wall on top keep a smooth top band on sloped and steep-sloped tops. Inner walls keep their spacing on one-wall top layers and with precise outer wall, monotonic line tops no longer shift into the walls with the wall overlap settings, and on Bambu Lab printers thin strips along walls print as solid infill.
- Bambu Lab monotonic line tops fill the open strip at sharp tips, the pockets at square corners and at corners of 75 to 105 degrees, and print the line above a slot tip whole, with no stray gap fill at corners a line cuts across. On Bambu Lab printers with classic walls, tops round slot ends in steps and no longer leave small holes at their tips.
- Bambu Lab internal solid lines start the same distance from every wall. Narrow top and first layer strips start their lines at one spacing, and a narrow first layer strip prints one full width line down its middle.
- Stock Bambu Lab presets have precise outer wall off, so inner walls sit 0.043 mm nearer.
- Smart layers: walls, solid infill, top and bottom lines, classic walls and extra overhang loops are sized at each layer's own height instead of the set layer height. A multicolor object shorter than the rest of the plate no longer refuses smart layers when it has its own settings.
- On the first layer, regions that share walls print one bottom surface across their boundary, and parts and modifiers share walls and print the skirt and brim at the first layer widths they print. A region with its own settings prints its first layer at
initial_layer_line_width. - Overlapping bridge areas of one layer print once. The first internal bridge over an even grid votes at 135 degrees every time, and the higher step of a stepped top, small parts and stacks beside another bridge get the same first direction. The narrow solid beside a bridge over a ledge two layers below the top prints as internal solid infill.
- Narrow solid rings print lines where their corners have room instead of beads, no longer switch between lines and beads from layer to layer, and float or stay internal solid as the infill pattern pair decides.
- Sharp V grooves and points of 39 to 60 degrees keep their wall tips.
- More top and bridge fixes. On Bambu Lab printers, thin parts on the elephant foot layers print no stray gap fill line down their middle, and classic tapers and ledges print their top band at narrower steps. Short top lines beside sharp corners on slanted walls no longer go missing with one wall on top, and top and first layer lines on short stretched pieces reach a hair closer to the walls. Steep two wall classic tapers bridge sooner, following the infill overlap and wall widths. Variable width walls no longer float a thin strip over internal solid infill. Aegis walls put internal solid and rectilinear tops up to 0.009 mm farther from the walls.
- Where the brims of two objects on different filaments meet, the object on the lower filament keeps its full brim, and a brim cut short prints from the outside in. Prusa printers print every brim loop their width fits and keep the gap to the part with elephant foot compensation on, and the Prusa MK4 and MINI on the 0.25 mm nozzle print the brim against the part.
- Prusa 3MF projects slice closer to their own settings: the first layer prints at each feature's own width, the project's own printer G-code is used when chosen, the later of two overlapping parts in one filament prints its settings in the overlap, objects are ordered by their first layer box, brims print first on the first filament and merge where they touch, part width percents and a modifier's own wall and feature widths are read right, and a filament's own ramp lift climbs at its own angle (straight up when the printer's ramp is off).
- A 3MF project opened on its own printer keeps its plate type (each plate's own, with the Textured Cool and Supertack plates), wipe tower position, filament vendors and printer settings such as air filtration, fan direction and silent mode speeds, and takes each filament's type (PETG and TPU keep their own settings instead of PLA's). A project cannot raise its printer's machine limits or change its nozzle height.
- Mixed filaments no longer share values: a slot never takes another slot's cool plate temperatures, nozzle temperature range, flush temperature, fan lead time or change length.
- A 3MF part of a type SlicerX does not know prints as a normal part, in sx, the MCP server and the app. A project's printer G-code that reads a setting SlicerX does not model now slices, and a config with the old shell thickness switch set to 0 slices with moderate vertical shells, as the app does.
- A saved .gcode.3mf lists every filament on the rail with its own settings, and leaves out a filament ironing speed on automatic and an empty post-processing list so other slicers open it without a settings error.
sx sliceprints each plate of a project at its own plate type's bed temperatures, and Textured Cool Plate projects print at that plate's temperatures.- Bambu Lab H3C: the prime tower and first layer infill print at the preset widths (
prime_tower_line_width0.8,initial_layer_infill_line_width0.6), the tower wipes each filament's own prime volume, the unload when a print starts on a new tool is timed (about 28 s per extra filament), and a chamber temperature over 65 C prints at 65 C with asafety_limitwarning (chamber_temperature_clamped). H3C projects whose TPU lists only its 2.85 mm variant, and projects saved by the 2.9.1 release of the maker's slicer, open and slice. - With smooth timelapse the prime tower also prints on layers that hold only support, and Arrange keeps room for it.
- Two nozzle printers with different nozzle sizes get the right nozzle's size in custom G-code.
- Projects and profiles keep
top_area_threshold(the single wall top step width) andoverhang_totally_speed, instead of using 200% and the bridge speed. - Turned parts stay on the bed on printers whose printable area starts off 0, 0. A resume plan keeps a plate's own layer heights, and stretched layers stay inside the printer's layer limits and warn when the room is tight.
- The plate check no longer takes minutes on a by-object plate with parts stacked in one spot, and it can be stopped partway with no answer. The thin feature warning reads a minimum feature size given as a list, and a dual head mirror refusal says which way to move the part.
- The Ender-3 V3 uses its stock presets, including 0.5 mm first layer lines, and the Prusa MK4 and MINI use the stock first layer line width and elephant foot compensation.
- Slicing is faster and lighter: classic tree supports slice up to about 10 times faster, models with many small sparse infill pockets and large models with one wall tops slice faster, big 3MF projects open faster,
sx slicefrees emitted G-code sooner and builds the preview only when asked, a plate's mesh is held only for parts with paint, and slicing a large project file through the MCP server uses less memory. - Parts arrayed about their own axis with
sx-geomjoin in milliseconds, where a 100 sided cylinder in 12 copies took minutes. Fit a hole and Cut a thread find the holes made with Subtract a shape. - A bore along a turned or lofted part stays closed and light, and joins after it go through (MCP
slicerx_geom_subtract1.1.1). The cut splits only the faces the cutter reaches, so a bore down a flared stem leaves 15874 triangles instead of 64180, and a bore along a turned hole of its own size leaves the part closed wherever it sits on the plate.
New
sx arrange --requestlays out a plate of distinct parts without slicing and exits 3 when some parts have no room. A request'splate.placementtakesarrange, andplate.arrangetakesspacingMm,rotate,stepDeg(default 10),effort(quick,normalorthorough),keep(ids that stay put) andnewPlates(parts with no room go to new plates). The layout keeps off keep-out zones, keeps the extruder clearance apart when printing by object, and sizes support and brim room as the slice does.sx slice --requestandsx check --requestarrange such a plate first, and a plate whose parts do not all fit is refused with{"refused": "arrange"}naming them."placement": "keep"in a request'splateslices a 3MF's parts where the file puts them. A part off the printable area is refused (exit 3) naming how far it reaches past each edge.- A request with a plate's own layer heights can set
layerTopsExact, which keeps them as given on plates that print two or more filaments and stretches them for Z shrinkage compensation inside the layer limits, andlayerTopsSlicedfor a resume. - Paint reaches filament 32. A paint text names filaments 17 to 32 as a run after the leaf code C (18 is
0FC, 32 isEFC), and paint inslic3rpe:*attributes reads as the same paint. A text that runs out or is not upper-case hex is refused. - The Bambu Lab H3C (
bambu-h3c, nozzles 0.2, 0.4, 0.6 and 0.8) and the Prusa MK3.5 (prusa-mk3.5, nozzles 0.25, 0.4, 0.6 and 0.8) are in the catalog. The H3C plans tool changes per hotend:filamentMapcomes back withextrudersall 1 and `nozzle...
SlicerX engine 0.2.7
The sx, sx-geom and sx-link command line tools and libslicerx (the C ABI, with include/slicerx.h) for macOS (universal), Windows (x64) and Linux (x64). SHA256SUMS.txt has the checksums. The macOS binaries are signed with a Developer ID and notarized. The integrator kit 0.2.7 ships with this release.
What changed since 0.2.6:
Fixes
- A color change now pauses the print so you can swap filament by hand, instead of writing
M600. The pause isM400 U1on Bambu Lab printers, the profile's own pause on other printers, andM601when the profile has none. On a plate printed by object, each object pauses at that height. - A tool change placed at a height in a 3MF project now happens on that layer instead of being ignored. It applies on a plate that prints one filament, by layer. Any other plate slices as before and carries a
tool_change_skippedwarning. - Top surfaces no longer spread into a band under the walls of a part that rises from them.
- On Bambu Lab printers, aegis walls leave the same top surface edge and gap fill beside a rising part as classic walls.
- Top surfaces and first layers inside a single wall spread their lines evenly from the wall, so narrow strips no longer miss lines.
- Spiral vases whose outline moves between separate parts travel the short way to the next one.
- Spiral vase prints no longer travel through a printer's keep-out areas when the spiral moves to another part of the object. The travel goes round the zone like any other travel, and the slice report lists any travel that still runs into one.
- Bed mesh probing on a plate printed by object covers every object, not only the first.
- Parked Snapmaker U1 heads always drop to their standby temperature between uses.
- Multi-color prints on the Snapmaker U1 count the 5 s each tool change takes in the print time.
- A request's plate is centered on the printer's printable area. On the Snapmaker U1 (area from 0.5, 1) an object without a position now lands at 135.5, 136, where
sx slice --requestused 135, 135.
New
sx remap-toolheads <in.gcode> --map 0=2,1=3 -o <out.gcode>moves the filaments of a sliced Snapmaker U1 file onto other toolheads without a printer. It prints what changed and the output's SHA-256. A file it cannot rewrite safely exits with code 3, names the line and reason, and writes nothing.- A request can set tool changes by height or layer (
toolChanges). From the first layer that reaches the height, every object prints in the change's filament, with the printer's change G-code.sx sliceon a 3MF plate andsx slice --requeston a project plate apply the project's own tool changes. - When a Snapmaker U1 pauses because a toolhead ran out of filament, the printer status now names the toolhead: "Paused: filament runout on T2".
live.runoutSlotslists the slots. The status query asks each toolhead's filament sensor only while a job prints or is paused.
Integrator kit
- The kit has an optional STEP reader tarball,
slicerx-step-reader.tgz, listed inkit-manifest.jsonas optional and inSHA256SUMS.txt. Install it beside the MCP tarball (npm install ./kit/slicerx-step-reader.tgz) to read STEP files. The MCP tarball itself is unchanged. @slicerx/step-readeris the app's STEP reader as a package, for browsers, workers and Node. It reads STEP files saved with a UTF-8 byte order mark, which were refused as not STEP before. The memory cap is exported asSTEP_MAX_MEMORY_MB, so a browser worker can pass the same cap: a file that needs more fails without_of_memoryinstead of slowing or crashing the tab.slicerx_step_readreads a STEP file and, withoutputset tostlorobj, writes the meshes to a new file in the output folder. Without the reader installed it is refused withnot_supported, anddetails.installnames the kit tarball.slicerx_remap_toolheads1.0.0 runssx remap-toolheadsfor MCP clients and returnsgcode_path,sha256,source_sha256,tools_used,unused_map_toolsandcounts. A file it cannot rewrite is refused with the new error coderemap_refused.slicerx_printer_statusandprinter.statuscarrylive.runoutSlotson a Snapmaker U1: the slots of the toolheads whose filament sensor reports no filament during a job, absent when none does.- A slice through the MCP server uses the printer maker's process preset, machine settings and default filament, as the app does. A slice that names no filament gets the filament the app gives a fresh plate on that printer, listed in
applied. Estimates change with it: a 20 mm cube on the Bambu Lab A1 goes from 6 to 9 minutes, and on the Snapmaker U1 from 9 to 15. On a Bambu Lab printerprocess:standardleaves supports off, as the maker's Standard does. Namingprocess:<tier>aftermachine:<id>no longer sets a dual nozzle printer back to one nozzle. slicerx_slice_fileandslicerx_estimate_fileplace a file in the middle of the printable area on printers whose area does not start at 0, 0, such as the Snapmaker U1.slicerx_slice_filewithproject_settingscounts the filament a project's tool change prints in among the plate's filaments, so a box on filament 2 with a change to filament 4 slices with four filaments' settings.slicerx_arrange1.10.0 keeps every object on a plate and turns each copy where that fits more, as the app's Arrange does. Copies with no room go to new plates.movedlists each move by object and plate, andturnslists every copy of the arranged object with its plate andturnDeg.slicerx_project_duplicate1.1.0 never puts a copy past the bed's edge and keeps the turn of a copy arrange turned.slicerx_project_show1.1.0 gives each placement'sturnDeg.slicerx_arrangeand Fill bed place as many copies of a box as fit in rows. Before, the nest could leave one out: of eight 10 x 50 mm bars 2 mm apart on a 100 x 60 mm bed it placed seven.- Printers reached through an Obico tunnel: a printer config can name
tunnel: "obico"for a Moonraker or OctoPrint printer, with the tunnel's user name and password in the keychain. sx-link refuses any other host off the local network. The new error code istunnel_data_limit.slicerx_printer_tunnelreads the tunnel, its problem, this month's data and Obico's failure score, andslicerx_printer_snapshotrefuses such a printer withnot_supportedanddetails.reasoncamera_off_tunnel. @slicerx/embedbuilds big parts (20,000 triangles or more) in a worker of its own, so a big model shows at once without holding the page. ThemeshWorkerprop is on by default;falsebuilds on the page, and<sx-viewport>takesmesh-worker="off".@slicerx/viewport: copies of one object share their geometry, so duplicating is faster and copies add no graphics memory. The shader warm-up waits until big parts have their final geometry, which removes a stall of about a second on computers that draw 3D in software.@slicerx/viewport/edge-draglets an app built on the viewport offer drag to another plate.enableEdgeDrag(viewport, options)turns it on: a person drags a part past a bed edge and the host moves it to another plate or a new one. The host supplies its plates, the shown plate and the move.dropTarget,notify,obstaclesandonSwitchfit it to the host's own bars, andcanMovecan keep some objects on the bed. Colors are the--sx-edge-*custom properties (or thethemeoption) and every string can be replaced throughlabels. On a phone the view slides toward the side a finger's part heads for, so the line arms with the part and the finger on screen, and a drop with no plate bar shows the plate at once with a short "Moved to Plate 4" note. The viewport's main entry does not grow; the gesture code loads on the first part drag, and nothing runs while no part moves. The README has a "Drag to another plate" section.@slicerx/viewportgives a host the pieces edge drag is built on:setEdgeDrag(hook)takes a moving part past the bed's edges (the hook's payload carries the bed's size),cancelDrag()calls off a running move for Esc,setDragZoom(scale)eases the view out and back,keepCamera(change)holds the framing through a plate swap,showSelection({ keepZoom: true })slides to a selection that is out of sight, andplaceReadout(x, y)moves the distance readout. A lost pointer during a group move now puts every part of the group back, not only the pressed one.@slicerx/viewport: parts selected just as a project opens now show as selected in the 3D view.setSelectionkeeps ids the view has not built yet and selects them as their objects arrive, and the next selection drops any that never come.selectedObjects()(optional on theViewporttype) returns the ids drawn as selected.- mimir turns down a part whose shape its tools cannot make (living things, sculpted forms, shapes made to fit a body, cross-sections that vary along the part, sweeps along a curved path) and offers the closest version it can build. On Auto it no longer moves to muninn only because it built a part, and attaching a picture or PDF alone no longer starts a design run there. It still moves up when the request calls for it (many steps, a part that works with another part, a size only the person knows), when a
design.checkfinds the part off its plan, and after repeated tool failures.mimir_sessionlistsmechanismamong the reasons a turn can start on muninn. - mimir on a local model keeps more room for the conversation. Every turn sends the questions, lookups, notes, knowledge base, plate and slicing tools and the app's commands. The printer tools, printer setup, calibration, schedules, the optimizer and the other less used tools join a turn when the request or the plate's printer asks for them, or once the chat has called one. A tool an edition or plugin adds joins the same way (set
toolseton the tool). Cloud models get every tool on every turn, as before. - mimir on a local model keeps its full instructions withi...
SlicerX 0.2.17 (pre-alpha)
SlicerX 0.2.17 for testers. SlicerX is pre-alpha: expect rough edges, and slices can still differ from Bambu Studio and OrcaSlicer. Please report bugs in the SlicerX Discord or as GitHub issues.
Slicing:
- Bambu Lab printers and imported projects print the walls their presets use
- Skirts keep their distance from the brim as printed, on every skirt layer, and imported projects that set where the skirt goes place it there
- Spiral vase layers no longer start with a thin or thick spot or a strand across the part, and vases whose outline moves between separate parts travel the short way to the next one
- Spiral vase prints no longer travel through a printer's keep-out areas when the spiral moves to another part of the object
- Projects whose objects carry per-extruder speeds like
50,nilslice instead of stopping with an unexpected value error - A per-object setting the slicer cannot use is reported with the object's name instead of being skipped silently
- aegis walls on curved parts go back to their normal width where the part is wide enough for infill
- Bambu Lab first layers spread evenly, and top lines line up with the object and fill narrow tops
- Narrow top and first-layer strips whose lines run across them get surface lines as soon as one fits, instead of a gap fill bead
- Top surfaces no longer spread into a band under the walls of a part that rises from them
- On Bambu Lab printers, aegis walls leave the same top surface edge and gap fill beside a rising part as classic walls
- Top surfaces and first layers inside a single wall spread their lines evenly from the wall, so narrow strips no longer miss lines
- A color change now pauses the print so you can swap filament by hand
- Tool changes set at a height in a 3MF project open in the app and print on their layer. The change's filament shows in the preview colors, the filament list and the send dialog
- Bed mesh probing on plates printed by object covers every object, not only the first
- Snapmaker U1: parked heads always drop to their standby temperature between uses, and multi-color prints count the 5 s each tool change takes in the print time
- Picking a collision outlines the part that gets hit and fills the spot where it is hit
- The G-code view no longer jumps to a layer's start for a path it cannot find in the G-code
- The slice footer says an opened project waits for Slice, instead of calling it a big plate
Printers:
- Klipper and OctoPrint printers can be connected through Obico from printer setup. The card says Through Obico, shows this month's data used and left, and says in plain words when access was removed, the data is used up, a file is too big for what is left, or the printer does not answer. The camera is off through Obico
- A printer reached through Obico can take a new Obico address from its card menu after its access was removed, keeping its jobs and settings
- The Open Obico link in printer setup now opens Obico's page for authorizing the app from the desktop app
- The printer camera no longer says there is no picture while it is showing one
- The printer view shows the camera's frame rate, and a slow camera's picture no longer restarts after one late frame
- The printer view shows a Bambu Lab printer's current step (such as calibrating flow dynamics) with the job instead of as a warning
- The printer view no longer lists auxiliary and chamber fans on Bambu Lab A1, A1 mini and P1P printers, which don't have them
- When a Snapmaker U1 pauses because a toolhead ran out of filament, the printer status now names the toolhead, such as T2
- The Creality K1C prints Draft, Standard and Fine at the maker's 0.24, 0.20 and 0.12 mm layers
The app:
- Drag a part off a plate edge to move it to another plate or a new one
- In a very narrow window the plate toolbar now wraps into two rows instead of running off the edges of the view
- Parts selected just as a project opens now show as selected in the 3D view
- The note that objects moved to a new plate after Arrange all stays until you close it, and Show opens that plate
- Arrange fits as many parts on each new plate as on the first, turning them as needed
- Arrange and Fill bed place as many copies of a box as fit in rows, where they could leave one out
- Duplicating a model is faster, and copies no longer add graphics memory
- A STEP file that needs too much memory is refused with a clear message instead of slowing or crashing the tab, and STEP files saved with a byte order mark open instead of being refused as not STEP
mimir:
- mimir says when it can't build a shape and offers a simpler version instead of building a rough one. It covers living things, sculpted or organic forms, shapes made to fit a body, cross-sections that vary along the part, and sweeps along a curved path, and builds the simpler version only after you say yes
- On a local model, mimir sends one set of tools per message, so it keeps more room for the conversation and its full instructions fit in a 16k context
- On Auto, mimir no longer switches to muninn just to build a part, or because you attached a drawing. It still moves up when the request calls for it
For editions and integrations
Changes an edition or an MCP client should know about. The engine 0.2.7 notes have the full list.
- The integrator kit has an optional STEP reader tarball. Installed beside the MCP tarball, it lets
slicerx_step_readread STEP files and write them out as STL or OBJ slicerx_remap_toolheadsandsx remap-toolheadsmove a sliced Snapmaker U1 file's filaments onto other toolheads without a printer- A slice through the MCP server uses the printer maker's process preset, machine settings and default filament, as the app does, so estimates move: a 20 mm cube on the Bambu Lab A1 goes from 6 to 9 minutes
slicerx_printer_tunnelreads a printer reached through an Obico tunnel. A new Obico address can be set in the app onlyslicerx_arrangeandslicerx_project_duplicatekeep every object on a plate and on the bed, turn copies as the app does, and report where copies moved- Embedded views build big parts in a worker, and copies of one object share their geometry
- Integrators can turn on drag to another plate with one option from
@slicerx/viewport/edge-drag - Agents and integrators can read which Snapmaker U1 toolhead ran out from printer status (
live.runoutSlots) slicerx_mimir_tablists the tool sets a local model gets per message (turns)
Downloads:
- macOS (Apple Silicon and Intel):
SlicerX_0.2.17_universal.dmg, signed with a Developer ID and notarized - Windows (x64):
SlicerX_0.2.17_x64-setup.exe(recommended) orSlicerX_0.2.17_x64_en-US.msi, both signed by Sean Leonard - Linux (x64):
SlicerX_0.2.17_amd64.AppImageorSlicerX_0.2.17_amd64.deb, unsigned. Built on Ubuntu 24.04, so they need glibc 2.39 or newer.
SHA256SUMS.txt has the checksums, and downloads.json lists the same files for the site.
Print watch (failure detection from your printer's camera) is included and runs locally with the SigLIP2 model from the watch-model-v1 release. On Macs it runs on Apple Silicon only, since ONNX Runtime has no Intel Mac build.
Built from public main at c0ef256.
SlicerX engine 0.2.6
The sx, sx-geom and sx-link command line tools and libslicerx (the C ABI, with include/slicerx.h) for macOS (universal), Windows (x64) and Linux (x64). SHA256SUMS.txt has the checksums. The macOS binaries are signed with a Developer ID and notarized.
What changed since 0.2.5:
Fixes
- Projects whose objects store per-extruder speeds such as
50,nilslice with those speeds. Before, the slice stopped with an "unexpected value" error. - When an object's own setting has a value the engine can't use, the warning or refusal names the object.
- Stock Bambu Lab projects, and plain models on a Bambu Lab printer, print classic walls, as their presets do. Stock projects for other printers whose presets use classic walls change the same way.
- Spiral vase layers start each first move where the nozzle is, so the seam no longer prints under or over extruded, and a first move that would cross the part travels instead.
- Bambu Lab top surfaces and first layers line up with the object and fill narrow tops.
- Lines across a narrow strip start at one line spacing, and on Bambu Lab first layers a strip keeps its gap fill.
- aegis walls step back to their normal width on curved parts too.
- The skirt keeps its set distance from the printed brim, and a PrusaSlicer project's skirt is measured from the brim's nominal edge.
- Each collision names the object that gets hit and the region where it's hit.
New
sx check --requestsays what a by-object plate would be refused for, without slicing: the same collisions and fixes the slice reports, how sure each one is, and what only the slice can check.
Integrators
- Request configs, object settings and height ranges accept per-extruder number values (
"50,nil","50,60",["50", "nil"]). Entries inconfigReport.invalidcan carry an optionalobject. slicerx_slice_fileandslicerx_estimate_file(1.2.0) returnsummary.collisionswhenallow_collisionsis set, and a collision refusal hasdetails.collision_list.printer.statusreturns an optionalstatus.live.stage, the step a job is on.- Read the
sx-coreand@slicerx/mcp0.2.6 changelogs for the rest.
SlicerX engine 0.2.5
The sx, sx-geom and sx-link command line tools and libslicerx (the C ABI, with include/slicerx.h) for macOS (universal), Windows (x64) and Linux (x64). SHA256SUMS.txt has the checksums. The macOS binaries are signed with a Developer ID and notarized.
What changed since 0.2.4:
Fixes
- Single-color prints from a filament slot other than the first no longer send a tool change at every layer. The tool is selected once in the start G-code.
- Plates of several objects get one skirt around them all, close objects share a brim instead of being refused, and on the first layer each brim prints right before its own object.
- Objects print in the same order on every layer, ending nearest the front left corner, and on multi-filament plates each filament's objects follow their own position order.
- Sparse infill lines up with each object, so a part prints the same infill wherever it sits on the bed.
- Locked zag sparse infill prints on Bambu Lab printers. Before, it was left out.
- Plates whose objects use different layer heights slice, each object at its own height. A prime tower still needs one height.
- PrusaSlicer projects keep their filament lift and retraction, their line widths left on auto, and percent widths and support gaps, including on objects with their own layer height.
- Narrow strips get the surfaces other slicers give them, top surfaces and first layers spread their lines evenly, and with precise outer wall on they no longer overlap the innermost wall.
- aegis walls go back to their normal width where a thin part gets wide enough for infill, and put the right amount of plastic in thin wedges.
- With partial vertical shell thickness on Bambu Lab printers, narrow solid rings under a step print as floating vertical shell, like the default.
- Ironing keeps walls and support on their own filament, covers whole solid layers, follows the project's ironing direction and the filament's own ironing settings, and stays under the max volumetric speed.
- With prime tower no sparse layers on, a filament change after skipped tower layers prints on the tower, not in the air above it.
- Single nozzle multi-material printers ram, cool and load on the prime tower and purge the flush volume exactly.
- The stock MK4 lifts and retracts like the MK4 IS profile.
- Projects sliced through the MCP or CLI use the same printer, process, filament settings and filament slots as the app.
Integrators
- The slice summary has an optional
warning_detailslist with each warning's code, message, layer and object id.warningsis unchanged. - Read the
sx-coreand@slicerx/mcp0.2.5 changelogs for the rest.
Known issues
- Spiral vase layers can start slightly under or over extruded at the seam. The fix is in the next build.
Desktop app 0.2.16
- Ships the engine changes above.
- Slice warnings keep their own type on the desktop, in the browser and on the phone, so "objects overlap" no longer shows as an unsupported setting and phone slices show long bridge, collision and other warnings.
- Objects that overlap get a note saying which one prints the overlap.
- The 3D view no longer redraws every second while a printer reports its status.
SlicerX 0.2.16 (pre-alpha)
SlicerX 0.2.16 for testers. SlicerX is pre-alpha: expect rough edges, and slices can still differ from Bambu Studio and OrcaSlicer. Please report bugs in the SlicerX Discord or as GitHub issues.
What changed
- Single-color prints from a filament slot other than the first no longer change tools at every layer.
- Objects with their own layer height in projects from other slicers now keep a support XY distance given as a percent.
- The "objects overlap" note now shows as itself on the desktop instead of as an unsupported setting.
- Sparse infill now lines up with each object, so a part prints the same infill wherever it sits.
- With partial vertical shell thickness on Bambu Lab printers, narrow solid rings under a step now print as floating vertical shell on the layers above the bridge, like the default.
- PrusaSlicer projects now keep their filament lift and retract settings.
- On the first layer each object's brim now prints right before that object instead of all brims first.
- Plates of several objects now get one skirt around them all, and objects close together share a brim instead of being refused.
- Locked zag sparse infill now prints on Bambu Lab printers instead of being left out.
- With precise outer wall on, top surfaces and first-layer bottoms no longer overlap the innermost wall.
- Narrow strips at 0% sparse infill keep their gap fill until a top line fits, and strips nearly closed by a high wall overlap no longer get a stray top line.
- On plates with several filaments, each filament's objects now print in their own position order, and object settings no longer change the filament the first layer starts on.
- Narrow strips under arachne walls, and under classic walls with 0% sparse infill, now get the same surfaces other slicers give them, and aegis walls label floating shells like classic walls.
- Objects on a plate now print in the same order on every layer, ending nearest the front left corner, with each object finished before the next.
- Aegis walls go back to their normal width where a thin part gets wide enough for infill, instead of staying too wide for another millimeter of part width.
- Support next to modifiers and parts or objects with their own settings now prints at the support line width.
- PrusaSlicer projects that leave line widths on auto now print supports, walls and top surfaces at the widths the project means.
- The stock MK4 printer now lifts and retracts like the MK4 IS profile.
- Projects saved with a modifier now print the modifier's region in the object's filament when opened in other slicers, not in filament 1.
- Plates whose objects use different layer heights now slice, each object at its own height; a prime tower still needs one height.
- Multi-color projects sliced through the MCP or CLI now use the same filament slots as the app.
- On Bambu Lab printers, monotonic line top, bottom and internal solid surfaces now fill the slivers their lines leave with gap fill.
- Slicing a project through the MCP or CLI now uses the same printer, process and filament settings as the app.
- PrusaSlicer projects with percent widths or a percent support gap now print at the widths they set.
- Solid ironing no longer runs under the next layer's walls at a step.
- No change in output; slicing with narrow solid infill on Bambu Lab printers does a little less work.
- Narrow solid rings under a step print as floating vertical shell on the layers above the bridge instead of the first one, and only rings up to about 4.5 mm wide float.
- Projects for printers other than Bambu Lab that set both bottom flow ratios now open in the app with the bottom flow sx slices with.
- On printers other than Bambu Lab, a project's initial layer flow ratio now sets the bottom surface flow.
- Objects that overlap now get a note saying which one prints the overlap.
- Solid ironing now covers the whole layer on all-solid layers.
- Single-nozzle multi-material printers now unload, cool and load the filament at each tool change on the prime tower.
- Top surfaces and first layer bottoms now spread their lines evenly from edge to edge.
- On single-nozzle multi-material printers, the second filament now prints at its own temperature on the first layer.
- Aegis walls put the right amount of plastic in narrow strips, such as a thin wedge, instead of about 15 percent too much.
- Gap fill at sharp points no longer adds an extra wide piece at the end of the strip.
- Single nozzle towers with ramming no longer print an extra wipe row near a boundary.
- Support under thick bridges now also fills the gap beside the round bridge strands.
- Bambu Studio projects now print solid infill at the project's infill direction.
- Solid and sparse line infill now follow the solid and sparse infill direction settings.
- Single nozzle towers with ramming now print their wall on the tower's set outline.
- Ramming settings no longer show as unused on single-nozzle multi-material printers.
- Single nozzle towers with ramming now purge the full flush instead of about two rows less.
- The purge after ramming on single nozzle towers now starts on the ramming's last row.
- Ramming on single nozzle multi material towers now prints in wide lines at each listed speed.
- Single nozzle multi material printers now ram the old filament out on the prime tower.
- On single nozzle multi material printers the prime tower now counts its wall toward the first purge of each layer, so it purges the flush volume rather than the flush plus the wall.
- Purge rows on type 2 prime towers now put down the volume their spacing calls for.
- Prime towers on single nozzle multi material printers now purge the flush volume exactly, about a tenth less than before.
- Gap fill no longer skips short lines where a thin region splits in two.
- Support resting on a part under thick bridges now prints a round bead at its full height.
- Support under thick bridges now keeps its top gap below the round bridge strands.
- Gap fill in tapering gaps no longer puts out extra plastic at each width step.
- First-layer gap fill now prints at the first layer infill speed instead of the first layer wall speed.
- A solid infill link that meets another path is now a travel however short the layer is.
- Solid infill links next to an object's own walls and narrow bands now print instead of becoming travels.
- Solid infill lines on 135 degree layers are no longer skipped as travels next to walls and narrow solid bands.
- Ironing no longer runs faster than the filament's max volumetric speed allows.
- Support height comments in the G-code now state the support layer's own height.
- Bridge width and height comments in the G-code now match the bead that prints.
- Arachne overhang walls now follow a bridge flow above 1.
- Overhang walls with classic walls now print at the bridge line width and bridge flow.
- The layer cooling slowdown now follows each printer vendor's rule for bridges and overhangs.
- Supported prints with independent support layers no longer spend twice the layer cooling time.
- Layer cooling slowdown now includes ironing, so ironed layers no longer run long.
- Prime towers on single nozzle multi material printers no longer purge under the minimal purge when the flush matrix entry is zero or the flush goes into objects.
- Prime towers on single nozzle multi material printers now purge at least the minimal purge.
- Slow first-layer ironing no longer turns the bottom surface links into travels.
- The 3D view no longer redraws every second while a printer reports its status, so big previews stay responsive on slow graphics.
- Ironing flow, spacing and inset set in a filament preset now take effect.
- Solid ironing on the first layer now runs at the first layer speed.
- Ironing in Bambu Lab projects now runs at the project's ironing direction.
- The prime tower now extrudes the same amount whatever the filament flow ratio is set to.
- Ironing on a thicker first layer or on smart layers now lays down the flow you set.
- Small perimeter speeds set as a percent in printer presets now print at that speed.
- Locked zag skin and skeleton densities set as percents in a project now print as set.
- Supports in MCP slices of projects without gap settings now match sx slice.
- PrusaSlicer projects slice with their own settings from the CLI and MCP server.
- Ironing flow set as a percent in a project file now prints at that flow.
- Straight walls that span a gap between supports on Bambu Lab printers print at bridge speed.
- With prime tower no sparse layers on, a filament change after skipped tower layers prints on the tower instead of in the air above it.
- Supports in projects without gap settings sliced through the MCP now match the app.
- Max volumetric speed now follows the flow ratios each line really prints with.
- Ironing with infill on a second filament now keeps walls and support on their own filament.
- | Project or preset | Before | After |
- Bambu Lab projects with a first layer flow ratio set now print their first layer with it, in the app and from
sxalike: walls, bottom, brim, skirt, support and ironing, and the tower part after the first tool change. A first layer flow ratio set in other ways no longer changes Bambu Lab prints.
Downloads:
- macOS (Apple Silicon and Intel):
SlicerX_0.2.16_universal.dmg, signed with a Developer ID and notarized - Windows (x64):
SlicerX_0.2.16_x64-setup.exe(recommended) orSlicerX_0.2.16_x64_en-US.msi, both signed by Sean Leonard - Linux (x64):
SlicerX_0.2.16_amd64.AppImageorSlicerX_0.2.16_amd64.deb, unsigned. Built on Ubuntu 24.04, so they need glibc 2.39 or newer.
SHA256SUMS.txt has the checksums, and downloads.json lists the same files for the site.
Print watch (failure detection from your printer's camera) is included and runs locally with the SigLIP2 model from the watch-model-v1 release. On Macs it runs on Apple Silicon only, since ONNX Runtime has no Intel Mac build.
Built from public main at 9ddd2f4.
SlicerX engine 0.2.4
The sx, sx-geom and sx-link command line tools and libslicerx (the C ABI, with include/slicerx.h) for macOS (universal), Windows (x64) and Linux (x64). SHA256SUMS.txt has the checksums. The macOS binaries are signed with a Developer ID and notarized.
What changed since 0.2.3:
Fixes
- Multi-filament plates with ironing on keep each object on its own filament. Before, a short object's ironing could leave the next layer of a taller object printing in the wrong filament.
- PrusaSlicer projects that store 0% shrinkage open at their real size and slice. Before, they were refused as 10 to 100 times too big.
- A skirt over the bed edge is cut at the edge with a note, the same as the brim. It's refused only when no full loop is left.
- Layer heights above or below the printer's listed range print at the height you set. A height below 0.04 mm is refused with a message.
- Each plate of a multi-plate project prints its prime tower where the project put it.
- Spiral vases start their wall straight from the base, with no retraction or prime blob at the foot.
- Wipes run at the layer's acceleration, and the timelapse lift on the A1 and A1 mini at the travel acceleration.
- Tapering parts no longer leave an empty strip down the middle where the infill starts.
- Leaning arachne walls slow down by the width of each bead.
- Floating vertical shells on Bambu Lab printers no longer push into the inner wall.
- First-layer and support widths set to 0 print at the right width, and so do overhang walls on printers other than Bambu Lab.
- Single-wall parts, top surfaces and first layers keep full size with aegis walls. Tiny pins get a seam and seam gap. Round pegs and holes print closer to size.
Speed
- Multi-filament plates and projects with painted seams slice faster.
Integrators
sx project-settingsprints the settings a project file sets, and the request optionprojectDefaultsapplies the same project defaults the app uses.- The kit ships every setting's default.
- Projects opened through the MCP by printer name print with that printer's start and filament change G-code.
- A refused project G-code says it needs review and how to approve it.
Known issues
- Ironing with a separate infill or top surface filament on one object can still put a layer on the wrong filament, on any printer. Ironing is fixed when separate objects use separate filaments. Until the next build, turn ironing off if you set a separate infill or top surface filament.
- With "Prime tower no sparse layers" on, the first tool change after a skipped stretch prints its tower layer in the air, about 2 mm above the tower. Leave that setting off until the next build. It's off by default.
Desktop app 0.2.15
- Ships the engine changes above.
- At phone widths the toolpath legend's color chip sits under the view switch.
- A click right after a view change on a slow computer lands where the new view shows it.