Repository navigation
SlicerX engine 0.2.5
·
2069 commits
to main
since this release
The sx, sx-geom and sx-link command line tools and libslicerx (the C ABI, with include/slicerx.h) for macOS (universal), Windows (x64) and Linux (x64). SHA256SUMS.txt has the checksums. The macOS binaries are signed with a Developer ID and notarized.
What changed since 0.2.4:
Fixes
- Single-color prints from a filament slot other than the first no longer send a tool change at every layer. The tool is selected once in the start G-code.
- Plates of several objects get one skirt around them all, close objects share a brim instead of being refused, and on the first layer each brim prints right before its own object.
- Objects print in the same order on every layer, ending nearest the front left corner, and on multi-filament plates each filament's objects follow their own position order.
- Sparse infill lines up with each object, so a part prints the same infill wherever it sits on the bed.
- Locked zag sparse infill prints on Bambu Lab printers. Before, it was left out.
- Plates whose objects use different layer heights slice, each object at its own height. A prime tower still needs one height.
- PrusaSlicer projects keep their filament lift and retraction, their line widths left on auto, and percent widths and support gaps, including on objects with their own layer height.
- Narrow strips get the surfaces other slicers give them, top surfaces and first layers spread their lines evenly, and with precise outer wall on they no longer overlap the innermost wall.
- aegis walls go back to their normal width where a thin part gets wide enough for infill, and put the right amount of plastic in thin wedges.
- With partial vertical shell thickness on Bambu Lab printers, narrow solid rings under a step print as floating vertical shell, like the default.
- Ironing keeps walls and support on their own filament, covers whole solid layers, follows the project's ironing direction and the filament's own ironing settings, and stays under the max volumetric speed.
- With prime tower no sparse layers on, a filament change after skipped tower layers prints on the tower, not in the air above it.
- Single nozzle multi-material printers ram, cool and load on the prime tower and purge the flush volume exactly.
- The stock MK4 lifts and retracts like the MK4 IS profile.
- Projects sliced through the MCP or CLI use the same printer, process, filament settings and filament slots as the app.
Integrators
- The slice summary has an optional
warning_detailslist with each warning's code, message, layer and object id.warningsis unchanged. - Read the
sx-coreand@slicerx/mcp0.2.5 changelogs for the rest.
Known issues
- Spiral vase layers can start slightly under or over extruded at the seam. The fix is in the next build.
Desktop app 0.2.16
- Ships the engine changes above.
- Slice warnings keep their own type on the desktop, in the browser and on the phone, so "objects overlap" no longer shows as an unsupported setting and phone slices show long bridge, collision and other warnings.
- Objects that overlap get a note saying which one prints the overlap.
- The 3D view no longer redraws every second while a printer reports its status.