Repository navigation
SlicerX engine 0.2.8
·
1025 commits
to main
since this release
The sx, sx-geom and sx-link command line tools and libslicerx (the C ABI, with include/slicerx.h) for macOS (universal), Windows (x64) and Linux (x64). SHA256SUMS.txt has the checksums. The macOS binaries are signed with a Developer ID and notarized. The integrator kit 0.2.8 ships with this release.
What changed since 0.2.7:
Fixes
- Classic walls with one wall on top fill more of the top surface. The top band starts at the inner wall's edge, ends half the outer wall in on flat tops, carries on past gradual falls and rounded corners of stepped slopes, keeps its first line along the wall at any overlap, fills the thin gaps beside inner walls, and gives full vertical shells under steps. Far less extra top surface prints along corner facets. Narrow grooves and slots under a step keep their inner wall.
- Aegis walls with one wall on top keep a smooth top band on sloped and steep-sloped tops. Inner walls keep their spacing on one-wall top layers and with precise outer wall, monotonic line tops no longer shift into the walls with the wall overlap settings, and on Bambu Lab printers thin strips along walls print as solid infill.
- Bambu Lab monotonic line tops fill the open strip at sharp tips, the pockets at square corners and at corners of 75 to 105 degrees, and print the line above a slot tip whole, with no stray gap fill at corners a line cuts across. On Bambu Lab printers with classic walls, tops round slot ends in steps and no longer leave small holes at their tips.
- Bambu Lab internal solid lines start the same distance from every wall. Narrow top and first layer strips start their lines at one spacing, and a narrow first layer strip prints one full width line down its middle.
- Stock Bambu Lab presets have precise outer wall off, so inner walls sit 0.043 mm nearer.
- Smart layers: walls, solid infill, top and bottom lines, classic walls and extra overhang loops are sized at each layer's own height instead of the set layer height. A multicolor object shorter than the rest of the plate no longer refuses smart layers when it has its own settings.
- On the first layer, regions that share walls print one bottom surface across their boundary, and parts and modifiers share walls and print the skirt and brim at the first layer widths they print. A region with its own settings prints its first layer at
initial_layer_line_width. - Overlapping bridge areas of one layer print once. The first internal bridge over an even grid votes at 135 degrees every time, and the higher step of a stepped top, small parts and stacks beside another bridge get the same first direction. The narrow solid beside a bridge over a ledge two layers below the top prints as internal solid infill.
- Narrow solid rings print lines where their corners have room instead of beads, no longer switch between lines and beads from layer to layer, and float or stay internal solid as the infill pattern pair decides.
- Sharp V grooves and points of 39 to 60 degrees keep their wall tips.
- More top and bridge fixes. On Bambu Lab printers, thin parts on the elephant foot layers print no stray gap fill line down their middle, and classic tapers and ledges print their top band at narrower steps. Short top lines beside sharp corners on slanted walls no longer go missing with one wall on top, and top and first layer lines on short stretched pieces reach a hair closer to the walls. Steep two wall classic tapers bridge sooner, following the infill overlap and wall widths. Variable width walls no longer float a thin strip over internal solid infill. Aegis walls put internal solid and rectilinear tops up to 0.009 mm farther from the walls.
- Where the brims of two objects on different filaments meet, the object on the lower filament keeps its full brim, and a brim cut short prints from the outside in. Prusa printers print every brim loop their width fits and keep the gap to the part with elephant foot compensation on, and the Prusa MK4 and MINI on the 0.25 mm nozzle print the brim against the part.
- Prusa 3MF projects slice closer to their own settings: the first layer prints at each feature's own width, the project's own printer G-code is used when chosen, the later of two overlapping parts in one filament prints its settings in the overlap, objects are ordered by their first layer box, brims print first on the first filament and merge where they touch, part width percents and a modifier's own wall and feature widths are read right, and a filament's own ramp lift climbs at its own angle (straight up when the printer's ramp is off).
- A 3MF project opened on its own printer keeps its plate type (each plate's own, with the Textured Cool and Supertack plates), wipe tower position, filament vendors and printer settings such as air filtration, fan direction and silent mode speeds, and takes each filament's type (PETG and TPU keep their own settings instead of PLA's). A project cannot raise its printer's machine limits or change its nozzle height.
- Mixed filaments no longer share values: a slot never takes another slot's cool plate temperatures, nozzle temperature range, flush temperature, fan lead time or change length.
- A 3MF part of a type SlicerX does not know prints as a normal part, in sx, the MCP server and the app. A project's printer G-code that reads a setting SlicerX does not model now slices, and a config with the old shell thickness switch set to 0 slices with moderate vertical shells, as the app does.
- A saved .gcode.3mf lists every filament on the rail with its own settings, and leaves out a filament ironing speed on automatic and an empty post-processing list so other slicers open it without a settings error.
sx sliceprints each plate of a project at its own plate type's bed temperatures, and Textured Cool Plate projects print at that plate's temperatures.- Bambu Lab H3C: the prime tower and first layer infill print at the preset widths (
prime_tower_line_width0.8,initial_layer_infill_line_width0.6), the tower wipes each filament's own prime volume, the unload when a print starts on a new tool is timed (about 28 s per extra filament), and a chamber temperature over 65 C prints at 65 C with asafety_limitwarning (chamber_temperature_clamped). H3C projects whose TPU lists only its 2.85 mm variant, and projects saved by the 2.9.1 release of the maker's slicer, open and slice. - With smooth timelapse the prime tower also prints on layers that hold only support, and Arrange keeps room for it.
- Two nozzle printers with different nozzle sizes get the right nozzle's size in custom G-code.
- Projects and profiles keep
top_area_threshold(the single wall top step width) andoverhang_totally_speed, instead of using 200% and the bridge speed. - Turned parts stay on the bed on printers whose printable area starts off 0, 0. A resume plan keeps a plate's own layer heights, and stretched layers stay inside the printer's layer limits and warn when the room is tight.
- The plate check no longer takes minutes on a by-object plate with parts stacked in one spot, and it can be stopped partway with no answer. The thin feature warning reads a minimum feature size given as a list, and a dual head mirror refusal says which way to move the part.
- The Ender-3 V3 uses its stock presets, including 0.5 mm first layer lines, and the Prusa MK4 and MINI use the stock first layer line width and elephant foot compensation.
- Slicing is faster and lighter: classic tree supports slice up to about 10 times faster, models with many small sparse infill pockets and large models with one wall tops slice faster, big 3MF projects open faster,
sx slicefrees emitted G-code sooner and builds the preview only when asked, a plate's mesh is held only for parts with paint, and slicing a large project file through the MCP server uses less memory. - Parts arrayed about their own axis with
sx-geomjoin in milliseconds, where a 100 sided cylinder in 12 copies took minutes. Fit a hole and Cut a thread find the holes made with Subtract a shape. - A bore along a turned or lofted part stays closed and light, and joins after it go through (MCP
slicerx_geom_subtract1.1.1). The cut splits only the faces the cutter reaches, so a bore down a flared stem leaves 15874 triangles instead of 64180, and a bore along a turned hole of its own size leaves the part closed wherever it sits on the plate.
New
sx arrange --requestlays out a plate of distinct parts without slicing and exits 3 when some parts have no room. A request'splate.placementtakesarrange, andplate.arrangetakesspacingMm,rotate,stepDeg(default 10),effort(quick,normalorthorough),keep(ids that stay put) andnewPlates(parts with no room go to new plates). The layout keeps off keep-out zones, keeps the extruder clearance apart when printing by object, and sizes support and brim room as the slice does.sx slice --requestandsx check --requestarrange such a plate first, and a plate whose parts do not all fit is refused with{"refused": "arrange"}naming them."placement": "keep"in a request'splateslices a 3MF's parts where the file puts them. A part off the printable area is refused (exit 3) naming how far it reaches past each edge.- A request with a plate's own layer heights can set
layerTopsExact, which keeps them as given on plates that print two or more filaments and stretches them for Z shrinkage compensation inside the layer limits, andlayerTopsSlicedfor a resume. - Paint reaches filament 32. A paint text names filaments 17 to 32 as a run after the leaf code C (18 is
0FC, 32 isEFC), and paint inslic3rpe:*attributes reads as the same paint. A text that runs out or is not upper-case hex is refused. - The Bambu Lab H3C (
bambu-h3c, nozzles 0.2, 0.4, 0.6 and 0.8) and the Prusa MK3.5 (prusa-mk3.5, nozzles 0.25, 0.4, 0.6 and 0.8) are in the catalog. The H3C plans tool changes per hotend:filamentMapcomes back withextrudersall 1 andnozzlesthe hotend (0-based) of each filament, and a request picks tools withfilament_map_mode: "Manual"andfilament_nozzle_map. - Each object prints with its own nozzle's widths and layer height on printers with nozzles of two sizes. Per-nozzle values are lists in
config,featureFilaments[].nozzleMmreports the size when the sizes differ, and an automatic filament map on such a printer is refused as a config error (keyfilament_map). - Smooth timelapse (
timelapse_type1) on Bambu Lab printers prints the prime tower on every layer and wipes the nozzle there after each shot. Withenable_prime_toweroff the slice warns (unsupported_setting). - COLPIC thumbnails for Elegoo printers: a
thumbnailsentry such as320x320/COLPIC/#30394Fwrites;gimage:and;simage:at the start of the G-code. - A first layer line width per feature:
initial_layer_outer_wall_line_width,initial_layer_inner_wall_line_width,initial_layer_sparse_infill_line_width,initial_layer_internal_solid_infill_line_width,initial_layer_top_surface_line_widthandinitial_layer_support_line_width. Writing a key, even as 0, turns on per-feature widths (0 is the feature's automatic width at the first layer height). - Z hop type can be
Ramp Lift, which climbs along the travel, and filaments carryfilament_travel_slope(degrees, empty uses the printer'stravel_slope).filament_abrasive(filament) andnozzle_high_flow(printer) are new boolean list settings.prime_tower_line_widthandinitial_layer_infill_line_widthare settings a client can read, set and send. sx slice --requestwarns withno_machine_profilewhen the request carries no printer settings. It still slices on the engine's defaults.- SXPV v2 previews, the same toolpaths in about a fifth of the bytes:
options.previewFormat: "v2",sx slice --preview-format v2, orpreview_format: "v2"onslicerx_slice_file. v1 stays the default. Read either withreadPreviewfrom@slicerx/contracts. - A slice report with collisions carries
collisionPlate: the printable area, each object's id, name and outline hull, and the keep-out zones, so a client that cannot see the plate can draw where each collision is. sx-geommodeling: spline segments and loops in sketches (and in loft and sweep profiles, and sweep paths), smooth and closed lofts, a sweep of a closed profile along an open path, open profiles thickened into shells,sketch.projectfor edges, faces and outlines,sketch.traceto trace a PNG or JPEG into loops (thetracefeature, on by default, needscad), andpaint.textureto paint a model from its texture (thetexturefeature, on by default, needsformats; it takes 1 to 32 filament colors andpaintEvery). A build with its ownSX_GEOM_FEATURESlist addstextureto keep paint from a texture.sx-link: remote start after a plate check, queued plate starts and remote object skips; partner routes (relay.partnerRoute.*) for a capped byte stream from a partner app to its own phone; partner phones that pair under their app name; homing from the device page withdevice.home(printerId, { plateClear: true, epoch }); raw G-code lines that can move the head under a motion guard; filament changes on their own card; AMS slot settings a partner app can ask a person to make; filament unit humidity, drying and firmware from Bambu Lab printers; and each printer's own web page address. Details are under the kit.
Integrator kit
- The kit-assets zip (
slicerx-kit-assets-<version>.zip, a folder of the contents ofassets/) ships with every engine release from here on, written bynode scripts/pack-integrator-kit.mjs --zip-assetsand listed inSHA256SUMS.txt. The zip is reproducible. @slicerx/mcp: the server starts and answers its first request sooner (a fresh process about 350 ms sooner; the schema validator, YAML parser, schema converter, HTTP transport, knowledge base and makers' presets load on first use) and writes Node's compile cache, about 10 MB, to~/Library/Caches/slicerx/node-compile-cacheon macOS,%LOCALAPPDATA%\slicerx\node-compile-cacheon Windows and$XDG_CACHE_HOME/slicerx/node-compile-cache(or~/.cache/slicerx/node-compile-cache) on Linux. SetNODE_COMPILE_CACHE=<dir>to move it orNODE_DISABLE_COMPILE_CACHE=1to turn it off. A packaged server needsdist/cli-main.js(orslicerx-mcp-main.mjsin the standalone build) beside its entry, so ship the whole folder. On Windows the server removes the cache's leftover temporary files. Code that usesServerContext.profilesdirectly must pass every printer a slice can end on toprepare(queries, printers); a lookup on any other printer throws.slicerx_slice_file1.13.0 andslicerx_estimate_file1.10.0 takeplacementcenter,keeporarrange(keeprefuses a part off the printable area withinvalid_inputanddetails.reasonoff_bed), returnproject_printer(with a notice naming the profile to use when the slice is for another printer),filament_map(andhotendson the H3C) andprime_tower, take filaments 1 to 32, and name the arguments they ignore (codeignored_arguments, withprinter,process,filamentandmachinepointing toprofiles).placement: "arrange"addsarrangedand refuses a plate that does not fit withinvalid_input,details.reasonno_roomanddetails.not_fit.slicerx_slice_filewithpreview_format: "v2"writes SXPV v2, and withproject_settingsit opens a project's filament types, each slot's own values and every printer setting the file holds, and keeps its machine limits at or below the profile's.slicerx_arrange_file1.1.0 (new in this release at 1.0.0) takesstep_deg,effort,keepandnew_plates, and may returnorderandplates.slicerx_cloud_slice1.2.0 names the arguments it ignores inwarningsandnotices.slicerx_project_show1.2.0 takescheck: trueand returnsbyObject.engine,hotendson the H3C, and each object'snozzleandnozzleMmwith the printer'snozzlesand thefilament_map.slicerx_arrangereturnscheckandleftSure, andslicerx_app_uireads the app's check back inbyObject.engine.slicerx_project_set_tool1.0.0 puts a project filament on an H3C tool (orauto), andslicerx_project_object_nozzle1.0.0 prints an object with another nozzle.slicerx_printer_addtakesnozzles.slicerx_slice2.4.0 returnshotendsper plate andnozzle_mminfeature_filaments.- Projects and plates:
slicerx_inspect_project1.4.0 returnsproject_printerand lists a plate's own plate type asbed_type(such asTextured Cool Plate).slicerx_app_plate_add1.1.0 andslicerx_app_plate_settings1.2.0 taketextured-coolandsupertackasbedType, andhotendMapon the H3C (tools from 1, index slot - 1, refused withinvalid_inputfor a tool the printer lacks, 2.85 mm TPU off the TPU tool and any other filament on it). A plate type set on a plate is saved in the plate's entry asbed_typeas well ascurr_bed_type, so other slicers keep it.slicerx_pending_approvals1.1.0 returns theoptionsof a print handed to the hub,slicerx_project_scale1.1.0 keeps a mirror, andslicerx_app_ui1.1.1 andslicerx_app_collision_show1.0.1 reportcollisions.staleafter a rename or a layer mark change. With--app,project.set_overridesandapp.settingsset and readz_hop_types(one entry per extruder) andfilament_travel_slope(one entry per filament,nilfor the printer's value).@slicerx/mcpexportsreadDesignFileand theOpenedDesigntype. slicerx_project_mirror1.0.0 andslicerx_project_fill_bed1.0.0 mirror objects and fill the free bed with copies.slicerx_project_layer_marks,slicerx_project_layer_mark_addandslicerx_project_layer_mark_remove1.0.0 list, add and remove pauses, color changes and custom G-code at a layer in a 3MF project.slicerx_app_layer_profileandslicerx_project_layer_profile1.0.0 read and set a plate's own layer heights (setwith points,reset). A saved project carries them inMetadata/layer_heights_profile.txt, and an opened project's profiles become the plate's.slicerx_app_parts,slicerx_app_part_cloneandslicerx_app_parts_order1.0.0 read, clone and reorder the parts of an object.- A project holds 32 filaments:
slicerx_project_add_filamentandslicerx_project_set_filament1.1.0,slicerx_step_read1.4.0 and the slice tools take filaments 1 to 32.slicerx_paint_previewandslicerx_app_paint_preview1.0.2 take a paint state up to 32 and refuse 33 and up. - STEP and IGES:
slicerx_step_read1.4.0 reads.igsand.igeswith the same answer, caps andstep_codes plusstep_not_igesandstep_iges_compressed, plans a filament for each body color (filaments,max_filaments, per bodyfilamentandfilament_match,filaments_to_add), and readsSLICERX_STEP_READER_DIR. A server built with--standalone <dir> --step-readercarries the reader. An older reader refuses IGES withnot_supported.slicerx_project_add_model1.2.0 accepts .step, .stp, .igs and .iges files withbody_colors(applyby default).slicerx_open_in_app1.3.0 opens.igsand.igesfiles and textured OBJ files with their texture. @slicerx/step-readerreads IGES files:readIges,readCad,cadFormatandigesUnitare new,loadStepReader().read,readStepInWorkerandreadStepFileInWorkertake either format, andStepErrorgainsnot_igesandiges_compressed. An IGES file of loose trimmed surfaces and no solids is sewn into closed solids where its surfaces close, within a tolerance of a ten thousandth of the model's box diagonal (0.001 mm to 0.1 mm), with the note "The file has surfaces and no solids, so they were sewn into one solid." STEP files read exactly as before.loadOcctkeeps standard output quiet, and withmaxMemoryMband afile:URL it reads the wasm from disk in Node instead of failing withfetch failed.- Modeling tools:
slicerx_geom_loft1.2.0 (smooth,closed, open profiles withthicken) andslicerx_geom_sweep1.2.0 are new, andslicerx_geom_sketch_check1.1.0,slicerx_geom_extrude1.4.0,slicerx_geom_revolve1.4.0 andslicerx_design_sketch1.2.0 take splines.slicerx_design_sketch_svg1.0.0 turns SVG text into a sketch (arguments up to 63.5 KB, 65024 bytes),slicerx_design_sketch_project1.0.0 projects edges, faces and silhouettes into a sketch (moderealorreference), andslicerx_design_trace_image1.0.0 traces a PNG or JPEG into a sketch (dry_runtraces without adding).slicerx_app_paint_from_texture1.0.0 previews paint from a texture, andslicerx_design_open1.2.0 takestextureand returnsnotes.slicerx_geom_array1.2.1 merges a circular array much faster, and a join that is already inside the part says "The shape is already inside the part, so nothing changed." - Every modeling tool that makes or changes a body takes
feature, the plan feature the step builds (slicerx_geom_extrudeandslicerx_geom_revolve1.4.0,slicerx_geom_push_pull1.3.0,slicerx_geom_hole1.2.1, andslicerx_geom_loft,slicerx_geom_sweep,slicerx_geom_boolean,slicerx_geom_fillet,slicerx_geom_chamfer,slicerx_geom_shell,slicerx_geom_cutandslicerx_geom_split1.2.0).slicerx_design_steps1.1.0 reads it back,slicerx_design_edit_step1.1.0 sets it, andslicerx_design_check1.2.0 ties planned features to the steps tagged with their name. A design given by its name where its id goes is taken when exactly one design has that name. A design part that touches along an edge now reads open, and closure is read on the part's own positions. - Settings tools:
slicerx_explain_setting,slicerx_find_settingsandslicerx_validate_configreturn plain labels for 205 settings instead of the key read aloud, and aunitfor 10 settings that had none. Overrides and config checks refuse 0 forbridge_flow,internal_bridge_flow,layer_height,initial_layer_print_height,filament_diameter,filament_flow_ratio,nozzle_diameter,nozzle_heightand the extruder clearances withInvalid overrides,out_of_rangeandmin0.01. Range messages name only the limit a setting has, neverinf; match on the issue code.slicerx_preset_compare1.0.0 andslicerx_app_presets,slicerx_app_preset_compare,slicerx_app_preset_copyandslicerx_app_preset_undo1.0.0 compare presets by settings group. Tool and argument descriptions intools/listchanged wording. - Slicing through the MCP server:
printer:prusa_mk4s,printer:prusa_xl,printer:prusa_core_one,printer:voron_2_4andprinter:voron_tridentstart from the maker's process, supports off, the maker's PLA and the machine's own G-code, the same as the matchingmachine:<id>. Passintent:standardorenable_support: trueto keep supports on. Projects whose main model is over 64 MiB (up to 512 MiB) inspect and slice instead of failing withinvalid_model. Clients on the MCP SDK can callslicerx_step_readand get slice results with collisions after listing tools: tuple schemas no longer carryitems: false, and their length is inminItemsandmaxItems. - Printer tools:
slicerx_printer_queue1.2.0 takesoptions(bedLeveling,flowCalibration,vibrationCompensation,timelapse,firstLayerInspection), and a start with nooptionsgets the Print sheet's defaults for that printer.slicerx_printer_home1.0.0 homes a printer (G28) on a card a person approves, only while it is idle or finished, withprinter.homeas its own action andbad_statewhen the printer has started a print.slicerx_printer_statusandslicerx_printer_listreturnfirmwareandlive.units[].climate, andslicerx_printer_listreturnswebUi.slicerx_printer_gcodeandslicerx_printer_filamentfail a line that can move the head withbad_stateunless the printer is idle or finished, and withbed_checkunless the plate is known clear.M701,M702,LOAD_FILAMENT,UNLOAD_FILAMENT, tool changes,M109,G91, aG92with any letter butEand any line with a parenthesis count as motion.slicerx_printer_filament_change1.0.0 asks for an M600 on its own card (printer.filament_change), andslicerx_printer_set_slot1.0.0 asks a person to set one filament slot. - Remote start and approvals:
slicerx_remote_start_policy1.0.0 reads whether a phone away from home may approve a start,slicerx_printer_queue_start1.0.0 asks for a queued plate's card, andslicerx_print_adjust1.1.0 takeschange{kind: "skip_object", objectId}. Partner apps may callqueue.start, readqueue.list(redacted) andremoteStart.get, and raiseprinter.skipcards. Detectors sendcompared: trueinwatch.plateResultwhen the verdict came from the empty-plate comparison, andsx-watchtakes its code on stdin (--code-stdin) now that the hub no longer writeswatch-codeandsx-link code --watchis gone.slicerx_print_watch_status1.1.0 returnsguard,guardTripandguardPlateon each printer anddetectoron the answer. - Partner apps:
slicerx_partner_routes1.0.0 reads the partner routes (relay.partnerRoute.*, with per-account, per-route, daily and idle caps),slicerx_partner_devices1.0.0 andslicerx_push_status1.0.0 read partner phones and phone alerts. A phone app pairs withcreatePairClient({ partner: '<your app name>' })from@slicerx/pair, readsconn.info.partnerandconn.info.rights(approve,send), handles thequotaandconflicterror codes, and registers alerts withconn.push.registerPartner(expo, orapns/fcmwith its own https gateway). A partner phone never approves a card a partner app asked for or one with no record of who asked.printer.skip,printer.homeandprinter.filament_changejoinSIDE_EFFECT_ACTIONSin@slicerx/contracts, and a client's reason for a card goes in a request line that starts withREASON_PREFIX("Why: "). - Cloud slicing: a job for a whole 3MF with no
options.platesslices plate 1 with each build item its own object and returnsresult.projectPlates.options.platestakes 1 to 32 plate numbers from 1 to 1000, returnsresult.plateswith a report per plate and files at/v1/jobs/{id}/plates/{n}/gcodeand/preview, and counts each plate against the account's 20 slices a day (a job past that gets a 429 saying how many plates are left).slicerx_cloud_slice1.2.0 takesplates(a job sent to a printer may name only one),slicerx_cloud_jobs1.2.0 returnscollisionsper job and plate, andslicerx_cloud_access1.0.0 reads back the token's limits. Partner app tokens slice on the person's account, see only their own jobs and cannot target a printer.@slicerx/contractsaddsSliceResult.collisionPlate(CollisionPlate),planColorSlotsandnearestSlots. - mimir tools an integrator can call:
slicerx_mimir_dismiss1.1.0 turns down the waiting question or size sheet (askIdorsheetId, optionalsaid), andslicerx_mimir_session1.3.0 returnswaiting,answeredOnand acodeon error lines.slicerx_mimir_run1.0.1 reports a slice asstaleafter any change the app's own Print and Export check. @slicerx/embed:Viewportand<sx-viewport>read SXPV v2 previews as well as v1, and build big parts (20,000 triangles or more) in a worker of their own. ThemeshWorkerprop is on by default,falsebuilds on the page, a function supplies your own worker, and<sx-viewport>takesmesh-worker="off". On a plate of 10 objects and 1.3 million triangles in Chromium with a hardware GPU the plate draws in 0.06 s instead of 0.55 s. The worker ships asdist/mesh-build-worker.js.@slicerx/viewport: paint reaches filament 32.MAX_PAINT_STATEis 32, anddecodeTreeandencodeTreetake aPaintScheme(runby default, orescapefor theslic3rpe:*attributes and the facets JSON).decodeTree,paintTextLeafCountand the paint overlay refuse a text that runs out or is not upper-case hex (lower case was read before), andpaintTextLeftOvercounts codes past a whole tree.encodeTreewrites filament 18 as0FC(it wroteFC, which a reader of filaments above 17 read as a longer state), and files saved before still open on filament 18. A project with paint on filament 17 or higher also carriesMetadata/Slic3r_facets_annotation.json.@slicerx/viewport: on a phone, a one-finger drag on the selected model moves it on its plate only, and the edge drag to another plate stays on the move arrows. A model added beside the others fades all the way in instead of staying invisible until something redraws the view.- Editions: the desktop page loads the STEP reader wasm from the resources, so an edition that builds it must also run
prepare-sidecars.mjs(or the bridge build). An edition that lists process settings gets one new expert row fortop_area_threshold, one for the Z hop type withRamp Lift, and an "IGES model" file association fromdesktopFileTypes. - Clearing the printer, or picking one with no printer profile, resets the nozzle volume a multi-color slice's flush volumes start from to that printer's own (the generic printer's is 0), so flush volumes no longer carry the last printer's.
- Read the
sx-core,@slicerx/mcp,@slicerx/step-reader,@slicerx/embedand@slicerx/viewportchangelogs for the rest.