Skip to content

Releases

FT-710 Control 0.9.5 beta

Pre-release

Choose a tag to compare

@SP5XTF SP5XTF released this 08 Nov 10:29

Fix

  • Crash with the "Who hears me" window open – the program could quit after a while (usually when the map refreshed its PSKReporter data). The map overlays were rebuilt so this can no longer happen. Update recommended for everyone on 0.9.4.

Poprawka (PL)

  • Zamknięcie programu przy otwartym oknie „Kto mnie słyszy” – program mógł się zamknąć po pewnym czasie (zwykle przy odświeżeniu danych z PSKReporter). Nakładki mapy zostały przebudowane tak, żeby to nie mogło się powtórzyć. Aktualizacja zalecana dla wszystkich z wersją 0.9.4.

SHA-256: 03a2b99356181d995941915001baae86c5789f8e905134c1d12b88c1ee1c9571

FT-710 Control 0.9.4 beta

Pre-release

Choose a tag to compare

@SP5XTF SP5XTF released this 08 Nov 08:38

What's new

New modes and tools

  • PSK31 and PSK63 – a new PSK tab: decoder with AFC (catches a few tens of Hz from a click) and a squelch that keeps noise off the screen, click-to-tune spectrum, sending with macros, logging as PSK31/PSK63.
  • Antenna SWR sweep (Window menu, ⌥⌘S) – steps through a band with short low-power carriers (5–10 W) and draws the SWR curve with the minimum marked; hover shows frequency and SWR; saved measurements, comparison (e.g. before/after adjusting the antenna), CSV export. A carrier test checks the setup first. Safety: amateur bands only, stops at SWR > 5, restores frequency, mode, power and tuner.
  • Who hears me (Window menu, ⌥⌘K) – a map of stations that received your signal according to PSKReporter, coloured by band, with the night side and the day/night line (grayline); period 15 min – 24 h, band filter, farthest receiver, receivers on the night side.

Works on a MacBook screen

  • The window now fits a MacBook Air (from 1280 pt): the bottom panel can be resized by dragging and collapsed (double-click or ⌥⌘B), left column boxes collapse with a click on their title, VFO-B shows as one row in a narrow window, tabs that do not fit go into a MORE menu.
  • Tooltips on the radio buttons (AGC, NAR/NOTCH/DNF/CONTOUR, IPO/AMP, ATT, tuner) and on every tab.

Logbook

  • Add manually… (log form on the main tab) and Add QSO… (log window) – QSOs from another radio, e.g. 2 m, 70 cm, 23 cm: band, UTC date, mode (incl. MSK144, Q65), propagation (repeater, satellite, tropo, EME…), radio and power; with a locator they count for VUCC.
  • QRZ/HamQTH data follows call changes – after an incomplete or corrected call the previous station's data is replaced (hand-edited fields stay) – in all log forms and the remote panel.
  • QSOs received from WSJT-X / JTDX are completed with QRZ/HamQTH data.

Program

  • File → Save / Restore program settings – all settings in one file (no passwords, no logbook); the current settings are backed up automatically before a restore.
  • Help → Save diagnostic report… – one file for a bug report (version, macOS, radio, CAT and scope logs, audio, settings – no passwords).
  • Help → CAT log (⌥⌘L) – now a separate window (formerly the LOG CAT tab).
  • The remote operation password is stored in the macOS Keychain (moved automatically on first launch).

Notes

  • Beta: test transmitting into a dummy load first.
  • Not yet signed with an Apple Developer ID – see the README for the first-launch steps.
  • Requirements: macOS 13 or later, Apple Silicon.

SHA-256: cd2f055ccb5ca6591189a46a5e0f1fabe24bee3fc003e8abdeb944af3c1456d8


Co nowego (PL)

Nowe emisje i narzędzia

  • PSK31 i PSK63 – zakładka PSK: dekoder z AFC i blokadą szumu, strojenie kliknięciem, nadawanie z makrami, dziennik.
  • Pomiar SWR anteny (Okno, ⌥⌘S) – krzywa SWR w paśmie na małej mocy, odczyt pod myszą, zapis i porównanie pomiarów, CSV, test nośnej; tylko pasma amatorskie, przerwanie przy SWR > 5, przywrócenie ustawień radia.
  • Kto mnie słyszy (Okno, ⌥⌘K) – mapa odbiorców Twojego sygnału z PSKReporter, z nocą i linią dnia i nocy.

Na ekranie MacBooka

  • Okno od 1280 pt: zmienna wysokość i zwijanie dolnego panelu (⌥⌘B), zwijane ramki lewej kolumny, VFO-B w jednym wierszu, menu WIĘCEJ dla zakładek; podpowiedzi przycisków radia i zakładek.

Dziennik

  • Dodaj ręcznie… i Dodaj QSO… – łączności z innego radia (2 m, 70 cm, 23 cm), z pasmem, datą UTC, propagacją, radiem i mocą.
  • Dane z QRZ/HamQTH podążają za zmianą znaku; łączności z WSJT-X/JTDX uzupełniają się danymi z QRZ.

Program

  • Plik → Zapisz / Przywróć ustawienia programu (bez haseł), Pomoc → Zapisz raport diagnostyczny…, Pomoc → Dziennik CAT (⌥⌘L), hasło pracy zdalnej w pęku kluczy macOS.

FT-710 Control 0.9.3 beta

Pre-release

Choose a tag to compare

@SP5XTF SP5XTF released this 03 Nov 20:11

What's new

Remote operation (browser)

  • Desktop layout – in a wide browser window (from ~1200 px) the remote panel looks like the Mac program: bands and modes on the left, VFO, arc meters (S, PO, SWR, COMP, ALC, RX/TX) and a large scope in the middle, the radio controls on the right, and tabs at the bottom (Log, DX Cluster, FT8/FT4, CW, Alerts). The phone layout is unchanged.
  • FT8 waterfall in the scope – an RF / FT8 switch above the scope; choosing an FT8 band switches the scope to the FT8 audio waterfall (0–3000 Hz, the Mac's colours, RX/TX markers). Tap to set RX, or TX with the "Tap: TX" switch.
  • NAR button in the Filter section; NR renamed to DNR as on the radio.
  • Fixed: slider values and the AGC buttons no longer stick out of the right column; FT8 message time no longer overlaps the SNR column.

Radio controls

  • NAR (narrow filter) – new button in the "RX DSP / Filter" box.
  • DNR, NB and PROC work like on the radio – a button turns the function on and off, the slider next to it (the knob) changes the level remembered by the radio, also while the function is off.
  • The RX/TX tile now reads "TX limit: 3 min" while receiving and shows time / limit (e.g. "0:42 / 3:00") while transmitting, in orange during the last 30 s.

FT8

  • QSOs are logged with QRZ/HamQTH data (name, QTH…) – the station's data is fetched in the background as soon as a QSO starts; if it doesn't arrive in time, the QSO is completed right after logging. Only empty fields are filled; the locator from the FT8 message is kept.

Fixes

  • Monitoring and the FT8 waterfall restart by themselves after a monitor goes to sleep, the Mac wakes up or audio devices change (previously they froze until monitoring was turned off and on). A watchdog also checks every 5 s that audio from the radio is flowing.
  • RF scope no longer stops for good after long operation – it reconnects automatically with no attempt limit (and resets the FT4222 chip if needed); restarting the radio should no longer be necessary.
  • Meters: fixed a rare crash while drawing values during transmission.

Wiki

  • add new Wiki files

Notes

  • Beta: test transmitting into a dummy load with low power first.
  • Not yet signed with an Apple Developer ID – see the README for the first-launch steps.
  • Requirements: macOS 13 or later, Apple Silicon.

SHA-256: ff633d429c1bcf55e80668b445e8a3db3e4ac1fa8b8c8ac00da9ca7b7a1b4b2a


Co nowego (PL)

Praca zdalna (przeglądarka)

  • Układ komputerowy – w szerokim oknie przeglądarki panel wygląda jak program na Macu; na telefonie bez zmian.
  • Wodospad FT8 w skopie – przełącznik RF / FT8; wybór pasma FT8 przełącza skop na wodospad FT8, dotknięcie ustawia RX (albo TX).
  • Przycisk NAR; NR nazywa się teraz DNR. Poprawione: wartości suwaków i przyciski AGC mieszczą się w kolumnie, czas w liście FT8 nie nachodzi na SNR.

Sterowanie radiem

  • NAR (wąski filtr) – nowy przycisk w ramce „RX DSP / Filtr”.
  • DNR, NB i PROC jak w radiu – przycisk włącza/wyłącza, suwak (pokrętło) zmienia zapamiętany poziom.
  • Kafelek RX/TX: „limit TX: 3 min” na odbiorze, a przy nadawaniu czas / limit (ostatnie 30 s na pomarańczowo).

FT8

  • Łączności zapisują się z danymi z QRZ/HamQTH (imię, QTH…) – pobieranymi w tle od początku QSO; tylko puste pola, lokator z FT8 zostaje.

Poprawki

  • Odsłuch i wodospad FT8 wracają same po uśpieniu monitora, wybudzeniu Maca albo zmianie urządzeń audio (wcześniej trzeba było wyłączyć i włączyć odsłuch).
  • Skop RF nie wyłącza się już na stałe po długiej pracy – sam odzyskuje połączenie; restart radia nie powinien być potrzebny.
  • Wskaźniki: poprawiony rzadki błąd zamykania programu podczas nadawania.

Wiki

  • **Pierwsze Wiki dodane

FT-710 Control 0.9.2 beta

Pre-release

Choose a tag to compare

@SP5XTF SP5XTF released this 01 Nov 23:05
  • Scope auto restart fix

wersja 0.9.2-beta, Apple Silicon, 5,0M
SHA-256 (do sprawdzenia przez testerów): 6e56143437950a24d1723a8c1c721e537d07e8131e35ecd9c6832411033ccfc6

FT-710 Control 0.9.1 beta

Pre-release

Choose a tag to compare

@SP5XTF SP5XTF released this 01 Nov 21:25
  • Fixes a crash after several hours of operation

FT-710 Control 0.9.0 beta

Pre-release

Choose a tag to compare

@SP5XTF SP5XTF released this 30 Oct 23:16

Zrzut ekranu 2026-10-30 o 18 59 57

First public beta of FT-710 Control – a native macOS station program for the Yaesu FT-710.

⚠️ Beta: test transmitting into a dummy load with low power first. Please report problems in Issues.

Installation: open the DMG, drag FT710Control to Applications. The beta is not signed with an Apple Developer ID yet – on first launch see the README (macOS 15: System Settings → Privacy & Security → Open Anyway; macOS 13–14: right-click → Open).

Requirements: macOS 13 or later, Apple Silicon.

SHA-256: a0e57907c4e5354a4798858415df1bf38975d7157d4a99e88390a716503dec08

Pierwsza publiczna beta FT-710 Control. Instalacja i obejście blokady macOS – README (sekcja „Po polsku”).