Skip to content

Blockshot 0.4.3 — music under the cut, and cuts on the beat

Choose a tag to compare

@stableyogiofficial stableyogiofficial released this 20 Sep 20:54
· 6 commits to main since this release

Music under the cut, with the cuts landing on the beat. Plus the setup wizard no longer shows a red error
for a file nobody needs.

Put a song under your film

There is a new Music under the cut card below the Cut section. Give it a song from your PC and every
cut you make from then on carries it: mixed under the takes' own sound, looped if the film runs longer than
the song, faded in at the start and out at the end.

A slider sets how loud the music sits. The house setting is -18 dB, which is quiet enough to talk over. The
song lives on the board, so you pick it once and every later cut uses it.

Blockshot can hear the beat

Press Listen for the beat and Blockshot reads the song and tells you its tempo — "Heard 128 beats a
minute in dusk-drive.mp3, 340 beats over 2:39". That number is the check: if it matches what you hear, the
next setting will work.

Cut on the beat then moves every cut onto a beat. Pick every beat, every 2 beats, every bar, or every
2 bars. A shot is only ever shortened to reach a beat, never stretched, so nobody in your film starts
talking slowly. A shot the beat cannot reach keeps the length you gave it.

Music with no clear pulse — a drone, a field recording, a piano ballad with loose timing — comes back as
"no steady beat found in this music". The song still plays under the film. Only the beat cutting is off.

None of this needs a new download. Blockshot reads the song with the ffmpeg it already ships.

Setup step 7: no more red error for the Wan file

Step 7 of the wizard checked every workflow, including the optional silent-video one, and showed
"model file not found: unet_name = wan2.2_ti2v_5B_fp16.safetensors" in red. Members read that as a
failure and went looking for a large file they do not need. The talking-video engine has been the house
default since 0.4.1.

The wizard now checks only the workflow you will actually use. Any other workflow that is missing a file
shows a grey line saying Pro, optional — check later in Settings, in the wizard and in Settings alike.

Thanks to nightkillers101 for reporting it.

What is not in this one

A reference-picture preset, meant to keep a face the same from shot to shot, was built and then held back.
Three test renders on a real card showed it copies the cast portrait instead of using it as a likeness: a
frame prompt naming a rooftop at dusk with a city skyline came back as the portrait again, right face and
no scene. It also needs a proper stand-in for shots that have no portrait yet. The work is kept and the
findings are written down, so it comes back when it draws the scene you asked for.

The full write-up, with what to set and what these settings will not do: https://forgebun.com/go/bs_film

Get it

File What it is
Blockshot-Setup-0.4.3.exe the installer, for your user only, no admin — 97,330,232 bytes, sha256 43ea0d87390325f36de51c029e40667734d99930218093233878af8554e320d2
Blockshot-0.4.3-portable.zip unzip anywhere and double-click Blockshot.cmd — 127,464,398 bytes, sha256 414ebbda48a6e742d6b8b56ce72ec06b5ed15b639a575441d08d63116bd6d040

Each file has its .sha256 next to it. Windows shows its blue box once because the file is not signed
yet: More info → Run anyway.

Close the old Blockshot from the tray icon first. Your boards, settings and key stay where they are.